BMC REMSTAR GII BiPAP System T-25 with Humidifier User Manual

1. 서론

This manual provides essential information for the safe and effective operation, setup, and maintenance of the BMC REMSTAR GII BiPAP System T-25 with Humidifier. Please read this manual thoroughly before using the device.

The RESmart GII BPAP Series is designed to provide non-invasive ventilation for patients experiencing respiratory insufficiency, suitable for both hospital and home use.

2. 중요한 안전 정보

WARNING: Read all instructions before use. Failure to follow instructions may result in serious injury or death.

• Always consult a healthcare professional for diagnosis and treatment of respiratory conditions.
• Do not use this device if it appears damaged or is not functioning correctly.
• 장치를 물과 기타 액체에서 멀리하세요.
• 작동 중에는 장치 주변에 적절한 환기가 이루어지도록 하세요.
• Use only accessories and parts approved by BMC.
• 청소 또는 유지 보수를 하기 전에 기기의 전원 플러그를 콘센트에서 뽑으십시오.

3. 제품 특징

The BMC REMSTAR GII BiPAP System T-25 incorporates advanced features for effective respiratory support:

• Bi-level Positive Airway Pressure (BPAP): Provides two distinct pressure levels for inhalation and exhalation.
• Ti Min/Ti Max: Ensures optimal inspiration time, significantly improving treatment efficacy.
• 3.5인치 컬러 LCD 디스플레이: Offers real-time pressure and flow waveform display for monitoring.
• SpO2 Kit (Optional): Allows for blood oxygen saturation and pulse rate display.
• Eco Smart Technology: Features an innovative dual water chamber heating system for optimal humidity and temperature delivery.
• Accurate Water Quantity Control: Includes real-time compensation for consistent humidification.
• Dynamic Parameters Adjustment: Adapts to patient needs for personalized therapy.
• Multiple Data Retrieval: Supports data access via SD Card, iCode II, and WiFi.

4. 설정 지침

Follow these steps to set up your BMC REMSTAR GII BiPAP System T-25:

1. 장치 포장 풀기: 포장에서 모든 구성품을 조심스럽게 꺼내십시오. 포장 내용물 목록에 있는 모든 품목이 있는지 확인하십시오.
2. 장치 배치: Position the BiPAP machine on a stable, flat surface, ensuring adequate space around it for ventilation.
3. 전원 연결: Plug the power cord into the device's power inlet, then connect it to a suitable electrical outlet.
4. Attach Humidifier (if applicable):
   

   Figure 4.1: Attaching the humidifier to the main unit. The humidifier slides into place as indicated by the blue arrow.

   If using the integrated humidifier, slide it securely into the designated slot on the main unit until it clicks into place. Ensure a firm connection.
5. Fill Humidifier Water Chamber:
   

   그림 4.2: 상단 view of the BMC REMSTAR GII BiPAP System T-25, showing the humidifier section and heat output indicators.

   Open the humidifier water chamber. Fill it with distilled water up to the maximum fill line. Do not overfill. Close the chamber securely.

6. 공기 튜브 연결하기: Attach one end of the air tubing to the air outlet port on the BiPAP machine and the other end to your mask.
7. Fit Mask: Place the mask on your face and adjust the headgear for a comfortable and secure fit, ensuring no air leaks.

5. 사용 설명서

To begin therapy with your BiPAP system:

1. 전원 켜기: Press the power button to turn on the device. The LCD display will illuminate.
2. 설정 조정: Use the control knob and buttons to navigate the menu and adjust therapy settings (e.g., pressure, ramp time, humidifier level) as prescribed by your healthcare provider.
3. 치료 시작: Once settings are confirmed, press the start/stop button to begin therapy. Airflow will commence.
4. 모니터 디스플레이: Observe the real-time pressure and flow waveforms on the display to ensure proper operation.
5. End Therapy: To stop therapy, press the start/stop button again. The device will power down or enter standby mode.

Note: Your healthcare provider will program the initial therapy settings. Do not change settings without professional guidance.

6. 유지관리 및 청소

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your device.

매일 청소:

• 물통: Empty any remaining water from the humidifier chamber. Rinse with distilled water and allow to air dry.
• 마스크: Disassemble your mask and wash all components with mild soap and warm water. Rinse thoroughly and allow to air dry away from direct sunlight.

주간 청소:

• Air Tubing: Wash the air tubing with mild soap and warm water. Rinse thoroughly and hang to air dry.
• 기기 외관: Wipe the exterior of the BiPAP machine with a damp 옷감. 장치를 물에 담그지 마십시오.

필터 교체:

Check the air filter regularly (typically monthly) and replace it if it appears dirty or discolored. Refer to your device's specific instructions for filter access and replacement.

7. 문제 해결

This section addresses common issues you might encounter with your BiPAP system.

If you encounter a problem not listed here or if solutions do not resolve the issue, contact BMC customer support or your healthcare provider.

8. 사양

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact your authorized BMC dealer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

제조사 : BMC