Stagg SUM40 보컬 콘덴서 마이크 사용 설명서

1. 서론

This manual provides detailed instructions for the Stagg SUM40 USB Vocal Condenser Microphone. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the microphone.

2. 제품 오버view

Stagg SUM40 is a USB back electret condenser microphone designed for recording vocals and instruments. It features a cardioid polar pattern, ensuring clear sound capture by focusing on the sound source directly in front of the microphone while minimizing side and rear noise. Its smooth frequency response contributes to a precise sound.

이미지 2.1: 앞면 view S의tagg SUM40 USB Condenser Microphone with its shock mount.

이미지 2.2: 측면 view S의tagg SUM40 USB Condenser Microphone.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Stagg SUM40 USB Condenser Microphone
• USB 케이블
• 쇼크 마운트

이미지 3.1: Stagg SUM40 Microphone Retail Packaging.

4. 설정

1. 짐 풀기: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. 설치: Attach the Stagg SUM40 microphone to the included shock mount. The shock mount helps to isolate the microphone from vibrations and handling noise.
3. 컴퓨터에 연결: Connect the Type B USB connector on the microphone to an available USB port on your computer using the provided USB cable. The microphone is compatible with Windows and Mac OS X operating systems and does not require additional drivers.
4. 헤드폰 모니터링: For direct monitoring of your audio, connect 3.5 mm (1/8") headphones to the headphone output mini jack located on the microphone.

Image 4.1: USB Type B and 3.5mm Headphone Ports.

5. 사용 설명서

1. 소프트웨어 설정: Once connected, your computer should recognize the Stagg SUM40 as an audio input device. Select it as the input device in your recording software or system sound settings.
2. 위치: Position the microphone approximately 6-12 inches (15-30 cm) from the sound source. Due to its cardioid polar pattern, aim the front of the microphone (where the Stagg logo is visible) directly at the sound source for best results.
3. 이득 조정: Adjust the input gain level in your recording software to achieve an optimal recording level without clipping (distortion).
4. 모니터링: Use the headphone output on the microphone to monitor your audio in real-time without latency.

6. 유지관리

• 청소: 마이크 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제는 사용하지 마십시오.
•  style="font-weight: bold;">Storage: When not in use, store the microphone in a dry, dust-free environment.
• 손질: Handle the microphone and shock mount with care to prevent damage. Avoid dropping the device.

7. 문제 해결

No Sound / Microphone Not Detected:

• USB 케이블이 마이크와 컴퓨터에 제대로 연결되어 있는지 확인하십시오.
• 컴퓨터의 다른 USB 포트를 사용해 보십시오.
• S를 확인하세요tagg SUM40 is selected as the input device in your computer's sound settings and recording software.
• 컴퓨터를 다시 시작하세요.

왜곡된 소리:

• Reduce the input gain level in your recording software.
• 마이크가 음원에 너무 가깝지 않은지 확인하세요.

낮은 볼륨:

• Increase the input gain level in your recording software.
• Ensure the microphone is positioned correctly towards the sound source.

윙윙거리는 소리/웅웅거리는 소음:

• 모든 케이블이 제대로 연결되어 있는지 확인하세요.
• Try connecting the computer to a different power outlet.
• Move the microphone away from other electronic devices that might cause interference.

8. 사양

9. 보증 및 지원

For warranty information or technical support regarding your Stagg SUM40 microphone, please contact Stagg customer service or visit the official Stagg web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.