1. 서론
This manual provides essential information for the safe and effective use of your ELITE Direto X Interactive Power Trainer. Please read all instructions carefully before assembly and operation. Retain this manual for future reference.
2. 안전 정보
- Always ensure the trainer is placed on a stable, level surface.
- 작동 중에는 어린이와 애완동물을 훈련기에서 멀리 떨어뜨려 놓으십시오.
- 트레이너 사용 중에는 움직이는 부품을 만지지 마십시오.
- Ensure your bicycle is securely mounted to the trainer before beginning any workout.
- Disconnect the power supply when the trainer is not in use or during cleaning.
- Use only the power adapter supplied with the trainer.
- 새로운 운동 프로그램을 시작하기 전에 의사와 상담하세요.
3. 패키지 내용
모든 구성품을 조심스럽게 꺼내어 다음 항목들이 모두 들어 있는지 확인하십시오.
- ELITE Direto X Interactive Power Trainer unit
- Front wheel support block
- 전원 어댑터 및 케이블
- Quick release skewer (for compatible bikes)
- Adapters for thru-axle bicycles (142x12mm, 148x12mm)
- 사용 설명서
Image: The ELITE Direto X trainer with its legs folded, alongside the front wheel support block. This illustrates the main components included in the package.
4. 설정
Follow these steps to set up your Direto X trainer:
- 다리를 펼치세요: Place the trainer on a flat, stable surface. Carefully unfold the support legs until they click into place, ensuring maximum stability.
- Install Cassette (Sold Separately): The Direto X does not include a cassette. Install a compatible 9/10/11-speed Shimano/SRAM cassette onto the freehub body. For Campagnolo, SRAM XD/XDR, or 12-speed Shimano, a specific freehub body (sold separately) is required.
- 자전거를 준비하세요: 자전거의 뒷바퀴를 분리하세요.
- 자전거 마운트:
- 퀵 릴리스(QR) 자전거용: Use the supplied quick release skewer. Insert the skewer through the trainer's axle and secure your bike's dropouts onto the trainer. Tighten the quick release lever firmly.
- 쓰루액슬 자전거의 경우: Select the appropriate thru-axle adapters (142x12mm or 148x12mm) and install them onto the trainer's axle. Mount your bike's dropouts onto the trainer and secure with your bike's thru-axle.
- 앞바퀴 위치: Place the front wheel of your bicycle onto the supplied front wheel support block to level the bike.
- 전원 연결: Plug the power adapter into the trainer and then into a suitable electrical outlet. The trainer will power on automatically.
Image: A cyclist actively using the ELITE Direto X trainer with a road bike, demonstrating a fully set up system ready for use.
5. Operating the Trainer
The ELITE Direto X is an interactive smart trainer compatible with various cycling applications.
- 연결성: The Direto X supports both ANT+ FE-C and Bluetooth Smart (BLE) protocols. This allows it to communicate with compatible devices and software.
- Pairing with Software:
- Open your preferred cycling application (e.g., Zwift, Rouvy, TrainerRoad, My E-Training).
- Navigate to the device pairing or sensor settings within the application.
- 검색 available trainers. Your Direto X should appear as an ANT+ FE-C or Bluetooth device.
- Select and pair with your Direto X. Ensure you pair it as a controllable trainer for interactive features.
- 구경 측정: For accurate power readings, perform a calibration (often called a 'spin-down' or 'zero offset') within your cycling application periodically, especially after initial setup or moving the trainer.
- 대화형 교육: Once paired, the trainer will automatically adjust resistance based on the virtual terrain or workout profile from your chosen application.
이미지: 자세한 view of the 'Direto X' branding and 'Interactive Power Meter' label on the trainer's casing, highlighting its key features.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your Direto X trainer.
- 청소: 부드러운 천으로 운동화를 닦아주세요.amp 사용 후에는 땀과 먼지를 닦아낼 수 있도록 천으로 닦아주십시오. 연마성 세제나 용제를 사용하지 마십시오.
- 저장: When not in use, store the trainer in a dry place away from direct sunlight and extreme temperatures. The legs can be folded for more compact storage.
- 검사: 정기적으로 모든 볼트와 연결부를 점검하여 단단히 고정되었는지 확인하십시오. 전원 케이블에 손상 흔적이 있는지 검사하십시오.
- 카세트 : Keep your cassette clean and lubricated according to bicycle maintenance best practices.
7. 문제 해결
If you encounter issues with your Direto X trainer, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 트레이너 전원이 켜지지 않음 | Power cable disconnected; faulty outlet | 전원 연결 상태를 확인하고, 다른 콘센트에 연결해 보세요. |
| Cannot pair with cycling app | Bluetooth/ANT+ off; trainer not awake; interference | Ensure device Bluetooth/ANT+ is on. Spin pedals to wake trainer. Reduce interference from other devices. Restart app/device. |
| 부정확한 전력 판독 | Needs calibration; incorrect setup | Perform a spin-down calibration in your app. Verify bike is securely mounted. |
| 저항이 변하지 않음 | Not paired as controllable trainer; app issue | Ensure trainer is paired as a controllable device (ANT+ FE-C or BLE FTMS). Check app settings or restart the application. |
| 작동 중 이상한 소음 | Loose components; cassette issue; bike drivetrain issue | Check all trainer bolts. Inspect cassette for wear. Ensure bike drivetrain is clean and properly adjusted. |
If the problem persists, contact ELITE customer support for further assistance.
8. 사양
Key technical specifications for the ELITE Direto X Interactive Power Trainer:
| 특징 | 사양 |
|---|---|
| 상표 | 엘리트 |
| 모델명 | Direto X (Interactive Trainer) |
| Model Number (Part No.) | 110171007EXUE |
| 저항 메커니즘 | 전자 |
| 연결성 | ANT+ FE-C, Bluetooth Smart (BLE) |
| 재료 | 금속 |
| 색상 | 검은색 |
| 품목 무게 | 20파운드(약 9.07kg) |
| 호환 휠 사이즈 | 최대 29인치 |
| 호환되는 자전거 유형 | 산악자전거, 로드바이크 |
| 카세트 호환성 | Shimano/SRAM 9/10/11-speed (cassette not included) |
9. 보증 및 지원
The ELITE Direto X Interactive Power Trainer is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELITE web대지.
For technical support, troubleshooting assistance, or warranty claims, please contact ELITE customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (110171007EXUE) and proof of purchase readily available.