SINOX 12V DC BLDC Ceiling Fan 32 Watt

SINOX 12V DC BLDC Ceiling Fan 32 Watt with Remote Control

사용 설명서

1. 서론

Thank you for choosing the SINOX 12V DC BLDC Ceiling Fan. This energy-efficient fan is designed for optimal air circulation and features a Brushless Direct Current (BLDC) motor for reliable performance. It operates on a 12V DC power supply and comes with a convenient remote control for ease of use. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of your fan.

SINOX 12V DC BLDC Ceiling Fan with remote control and features

Image 1.1: SINOX 12V DC BLDC Ceiling Fan highlighting smart remote, 2-year motor warranty, BLDC motor, and quiet operation.

주요 특징:

  • 12V DC BLDC Motor: Energy-efficient 32-watt operation.
  • 넓은 운영 볼륨tage: Functions within 10V-19V DC.
  • 원격 제어: Offers 5-speed options and On/Off functionality.
  • 높은 기류: Delivers 230 CMM (Cubic Meters per Minute) at 375 RPM.
  • 안전 기능: Includes reverse polarity protection and short circuit protection.
  • 내구성 있는 구조: Fitted with double ball bearings and 100% copper wiring.
  • 재료: Aluminium blades and body.
  • 장착 유형: Downrod Mount.

2. 안전 정보

Please observe the following safety precautions to prevent injury or damage to the fan:

  • Always disconnect power before installing, cleaning, or servicing the fan.
  • Ensure the power source is 12V DC and within the 10V-19V operating range.
  • Use a 2.5 square mm wire for DC side connections to ensure optimal performance and safety.
  • Installation must be performed by a qualified electrician or service personnel.
  • Mount the fan securely to a ceiling joist or structure capable of supporting its weight.
  • 선풍기 작동 중에는 손, 옷, 기타 물체가 날개에 닿지 않도록 하십시오.
  • 부품이 손상되었거나 없는 경우 선풍기를 작동하지 마십시오.
  • 이 팬은 실내에서만 사용하도록 설계되었습니다.

3. 패키지 내용

패키지에 모든 구성 요소가 들어 있는지 확인하세요.

  • SINOX 12V DC BLDC Ceiling Fan Unit
  • 원격 제어
  • 다운로드 마운트 키트
  • Fan Blades (typically 3 or 4, depending on model)
  • 장착 하드웨어(나사, 와셔 등)
  • 사용 설명서 (본 문서)

4. 설정 및 설치

Follow these steps for proper installation of your SINOX BLDC Ceiling Fan:

  1. 전원 차단: 설치 구역의 주 전원이 차단기에서 차단되었는지 확인하십시오.
  2. 장착 브래킷 설치: Securely attach the mounting bracket to a ceiling joist or a suitable electrical junction box capable of supporting the fan's weight. Use appropriate hardware.
  3. 다운로드 어셈블리: Insert the downrod through the canopy and motor housing. Secure the downrod to the motor with the provided pin and screws.
  4. 배선 연결:
    • Connect the fan's DC wires to your 12V DC power source (battery or solar panel output).
    • Ensure correct polarity: connect the positive (+) wire from the fan to the positive (+) terminal of the power source, and the negative (-) wire from the fan to the negative (-) terminal.
    • Use a 2.5 square mm wire for all DC connections to prevent voltage drop and ensure efficient operation.
    • The fan includes reverse polarity protection and short circuit protection.
  5. 팬 걸기: 팬 어셈블리를 조심스럽게 들어 올려 다운로드의 볼 조인트를 사용하여 장착 브래킷에 걸어주세요.
  6. 캐노피 설치: 덮개를 천장까지 밀어 올리고 장착 브래킷에 고정하여 배선 연결부를 가리십시오.
  7. 블레이드 부착: Attach the fan blades to the motor housing using the provided screws. Ensure all screws are tightened securely.
  8. 전원 재연결: 설치가 완료되고 모든 연결이 안전하게 이루어지면 회로에 전원을 다시 공급하십시오.
Diagram showing solar panel, battery, and SINOX fan connection

Image 4.1: Illustrative diagram of connecting the SINOX BLDC fan to a solar panel and 12V DC battery.

5. 사용 설명서

Your SINOX BLDC Ceiling Fan is operated using the included remote control. Ensure the remote has working batteries.

SINOX BLDC Ceiling Fan Remote Control with numbered functions

Image 5.1: Remote control for the SINOX BLDC Ceiling Fan, detailing button functions.

원격 제어 기능:

  1. Power On/Off (01): 팬을 켜거나 끄려면 누릅니다.
  2. LED Light On/Off (02): Press to turn the integrated 0.5 Watt LED light on or off.
  3. Speed Control (03): Buttons labeled 1 to 6 control the fan speed. Press '1' for the lowest speed and '6' for the highest speed.
  4. Reverse Rotation (04): Activates reverse rotation for hot and cold air circulation, useful for different seasons.
  5. Timer Mode (05): Set the fan to turn off automatically after 2, 4, 6, or 8 hours. Press the button repeatedly to cycle through timer options.
  6. Smart Mode (06): In Smart Mode, the fan automatically reduces its speed over a period of up to 12 hours, transitioning from fast to low speed.

6. 유지관리

정기적인 유지관리는 팬의 수명과 최적의 성능을 보장합니다.

  • 청소: 팬 날개와 모터 하우징을 주기적으로 부드러운 천으로 닦아주세요.amp 천을 사용하십시오. 연마성 세제나 용제를 사용하지 마십시오. 청소하기 전에 팬을 끄고 전원을 차단하십시오.
  • 블레이드 검사: Check fan blades for any cracks or damage. Damaged blades should be replaced immediately to prevent imbalance and potential hazards.
  • 견고성 확인: Annually, check all screws and connections for tightness. Loose connections can cause noise or malfunction.
  • 모터 윤활: BLDC 모터는 유지보수가 필요 없는 작동을 위해 설계되었으며 윤활이 필요하지 않습니다.

7. 문제 해결

팬에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

문제가능한 원인해결책
팬이 켜지지 않습니다.No power supply, incorrect wiring, remote control battery dead.Check DC power source (12V battery/solar panel). Verify wiring polarity. Replace remote control batteries.
Fan operates slowly or with low airflow.Insufficient power, incorrect wire gauge, dirty blades.Ensure power source provides adequate 12V DC. Verify 2.5 sq mm wire is used. Clean fan blades.
리모컨이 작동하지 않습니다.배터리 방전, 장애물, 리모컨 작동 범위 이탈.Replace remote batteries. Ensure no obstructions between remote and fan. Operate within effective range.
팬에서 이상한 소리가 납니다.나사가 헐거워졌거나, 날개의 균형이 맞지 않거나, 모터에 문제가 있을 수 있습니다.Check and tighten all mounting and blade screws. Ensure blades are not bent or damaged. If noise persists, contact support.

8. 사양

Detailed technical specifications for the SINOX 12V DC BLDC Ceiling Fan:

  • 상표: 시녹스
  • 모델: 12V DC BLDC Ceiling Fan
  • 전력 소비량: 32 와트
  • 운영 볼륨tag전자 범위: 10V - 19V 직류
  • Recommended Wire Gauge (DC side): 2.5 square mm
  • Airflow (CMM): 230
  • 회전 속도(RPM): 375
  • 모터 유형: BLDC(브러시리스 직류)
  • 특별 기능: Remote Controlled, Reverse Polarity Protection, Short Circuit Protection, 0.5 Watt LED Light
  • 베어링 유형: 더블 볼 베어링
  • 배선: 100% 구리
  • 재료: 알류미늄
  • 장착 유형: 다운로드 마운트
  • 제품 크기: 61D x 137.2W x 58.4H Centimeters (approximate, based on 1200mm sweep)
  • 권장 전원: 12V Battery or 60-100 Watt Solar Panel
Diagram explaining BLDC technology with an exploded view 모터의

Image 8.1: Explanation of BLDC technology, showing the internal components and benefits.

BLDC Technology Explained:

  • BLDC stands for Brushless Direct Current.
  • These motors are highly energy-efficient, consuming less power than traditional AC motors.
  • They offer consistent performance even at low wattage and during power fluctuations.
  • BLDC motors are known for their quiet operation and longer lifespan due to the absence of brushes, which reduces wear and tear.
  • The smart BLDC motor technology in this fan prevents overheating.

9. 보증 및 지원

SINOX is committed to providing high-quality products and customer satisfaction.

  • 보증: This SINOX BLDC Ceiling Fan comes with a 2년 모터 보증 covering manufacturing defects. Please retain your purchase receipt as proof of purchase.
  • 고객 지원: For any technical assistance, warranty claims, or service inquiries, please contact SINOX customer support. Refer to the product packaging or the official SINOX web최신 연락처 정보는 사이트에서 확인하세요.

© 2023 SINOX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.