1. 서론
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Cabletech UCH0198-2 Full Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed to securely hold flat-panel or curved LED televisions ranging from 32 to 55 inches, with a maximum weight capacity of 35 kg (77 lbs).
2. 중요한 안전 정보
- 중량 용량: Do not exceed the maximum weight capacity of 35 kg (77 lbs). Exceeding this limit can result in serious injury or property damage.
- 화면 크기: This mount is designed for TVs between 32 and 55 inches. While some larger TVs may fit VESA patterns, ensure they do not exceed the weight limit.
- VESA 호환성: Verify your TV's VESA mounting pattern is compatible with the mount's supported patterns (75x75, 100x100, 100x150, 150x100, 150x150, 200x100, 100x200, 300x200, 300x300, 400x200, 400x300, 400x400).
- 벽 구조: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. For wood stud installation, ensure studs are solid. For concrete or brick walls, use appropriate anchors (not always included). Consult a professional installer if unsure about your wall's integrity.
- 도구: 설치 시 적절한 도구를 사용하세요. 항상 보안경을 착용하세요.
- 집회: Do not attempt to install this product alone if the TV is heavy. Two or more people are recommended for safe installation.
- 어린이들: 설치 중에는 어린이의 접근을 차단하세요. 작은 부품은 질식 위험이 있습니다.
- 손상: 부품이 누락되었거나 손상된 경우 설치하지 마십시오. 교체 부품은 고객 지원 센터에 문의하십시오.
3. 패키지 내용
Please check to ensure all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- 벽판 조립체
- TV 브래킷 암 (2개)
- 설치 하드웨어 키트(TV와 벽 사이의 간격을 조절하는 다양한 나사, 와셔, 스페이서 포함)
- Wall Anchors (for concrete/brick, if included)
- 수준
- 사용 설명서
그림 1: 전면 view 벽걸이 구성 요소 중 일부입니다.
4. 제품 사양
| 모델 번호 | UCH0198-2 |
| 상표 | 케이블텍 |
| 호환되는 화면 크기 | 32인치 - 55인치 |
| 최대 하중 용량 | 35kg(77파운드) |
| VESA 호환성 | 75x75, 100x100, 100x150, 150x100, 150x150, 200x100, 100x200, 300x200, 300x300, 400x200, 400x300, 400x400 |
| 기울기 각도 | 0° ~ -20° |
| Horizontal Level Adjustment | +3° ~ -3° |
| 벽면 거리(확장형) | 78mm - 400mm (3.07" - 15.75") |
| 재료 | 금속 |
| 색상 | 검은색 |
5. 설정 및 설치
Before you begin, ensure you have all necessary tools and have read the safety information. Two people are recommended for installation.
5.1 필요한 도구(포함되지 않음)
- 연필
- 스터드 파인더 (목재 스터드 벽용)
- Drill with appropriate drill bits (e.g., 10mm for concrete, 5.5mm for wood studs)
- 소켓 렌치 또는 조절식 렌치
- Phillips 헤드 스크루 드라이버
- 줄자
- 안전 안경
5.2 TV 브래킷을 TV에 부착하기
- 화면 손상을 방지하려면 부드럽고 깨끗한 표면에 TV를 뒤집어서 조심스럽게 놓으세요.
- TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
- Select the correct diameter and length screws from the hardware kit that fit your TV's mounting holes. Use washers and spacers if necessary to ensure the screws do not penetrate too deeply or leave the bracket loose.
- Attach the two vertical TV bracket arms to the back of your TV using the selected screws. Ensure the hooks on the bracket arms are facing upwards (or towards the top of the TV) and are level with each other. Do not overtighten.
5.3 벽면 플레이트를 벽에 고정하기
Figure 2: Cabletech UCH0198-2 wall mount in extended position.
- 장착 위치 결정: Decide on the desired height for your TV. Mark the center point on the wall.
- (목재 스터드 벽의 경우) 스터드 위치를 찾으세요: Use a stud finder to locate the edges and center of two adjacent wood studs. The wall plate must be mounted to at least two studs for secure installation.
- 벽 플레이트 위치: Hold the wall plate against the wall at your desired height and center. Use a level to ensure it is perfectly horizontal. Mark the drilling locations through the holes on the wall plate.
- 드릴 파일럿 홀:
- 을 위한 목재 스터드: Drill pilot holes using a 5.5mm drill bit to a depth of approximately 60mm.
- 을 위한 견고한 콘크리트/벽돌 벽: Drill pilot holes using a 10mm drill bit to a depth of approximately 60mm. Insert the concrete anchors into the drilled holes until they are flush with the wall surface.
- 벽면 플레이트 부착: 벽면 플레이트를 드릴로 뚫은 구멍에 맞춰 정렬합니다. 하드웨어 키트에 포함된 나사못과 와셔를 사용하여 벽에 고정합니다. 모든 볼트를 단단히 조이되, 너무 세게 조이지 마십시오.
5.4 TV 걸기
- With assistance, carefully lift the TV (with brackets attached) and hook the TV bracket arms onto the wall plate.
- Ensure the TV is securely seated on the wall plate. The safety screws or locking mechanisms on the bottom of the TV bracket arms should be engaged to prevent accidental dislodging.
- 설치하기 전에 장착된 TV의 안정성을 조심스럽게 테스트하세요.asin완전히 바꾸세요.
6. 작동 지침 (조정)
Your Cabletech UCH0198-2 mount offers various adjustments for optimal view주고받음.
6.1 Extending and Retracting the TV
Figure 3: Wall mount extended, showing adjustable distance from wall.
- Gently pull or push the TV to extend it away from the wall (up to 400mm) or retract it closer to the wall (minimum 78mm).
- Ensure cables are not pinched or strained during movement.
6.2 TV 기울이기
- The mount allows for a tilt range of 0° to -20° (downwards).
- Loosen the tilt adjustment knobs or bolts on the TV bracket arms.
- Adjust the TV to the desired tilt angle.
- Retighten the knobs/bolts to secure the TV in position.
6.3 Swiveling the TV (Horizontal Adjustment)
- The articulating arm allows you to swivel the TV horizontally to achieve various view각도를 나타냅니다.
- Gently push or pull the side of the TV to rotate it left or right.
- The mount also features a small horizontal level adjustment of +3° to -3° to correct for minor leveling issues after installation. This is typically adjusted by loosening specific bolts on the TV plate, leveling, and retightening. Refer to the detailed diagrams for specific adjustment points.
6.4 케이블 관리
- The mount includes a cable winder or clips to help organize and route cables along the articulating arm.
- Secure cables to prevent them from dangling or getting caught during TV movement. Ensure enough slack is provided for full range of motion.
7. 유지관리
- 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
- 정기 점검: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
- 움직임: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with painted surfaces.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 설치 후 TV가 수평이 아닙니다. | Wall plate not perfectly level, or minor adjustment needed. | Use the horizontal level adjustment feature (+3° to -3°). Loosen the specific bolts on the TV plate, adjust with a level, and retighten. |
| 마운트가 헐거워지거나 불안정하게 느껴집니다. | Mounting bolts not fully tightened, or wall structure is inadequate. | Check and retighten all wall mounting bolts. If the wall structure is compromised, consult a professional. Ensure TV safety screws are engaged. |
| TV cannot tilt or swivel smoothly. | Adjustment bolts are too tight, or pivot points need lubrication. | Loosen tilt adjustment knobs/bolts slightly. Apply a small amount of silicone-based lubricant to pivot points if necessary. |
| Cables are getting pinched. | Insufficient slack or improper cable routing. | Reroute cables using the integrated cable management. Ensure enough slack for full range of motion. |
9. 보증 및 고객 지원
This Cabletech UCH0198-2 TV Wall Mount comes with a manufacturer's warranty of 2년 구매일로부터.
For warranty claims, technical assistance, or if you have any questions regarding the installation or operation of your product, please contact Cabletech customer support through your retailer or the official Cabletech website. Please have your model number (UCH0198-2) and proof of purchase ready when contacting support.