Pipishell Full Motion TV Monitor Wall Mount Instruction Manual

소개

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Monitor Wall Mount. Designed for optimal viewing flexibility, this mount supports 13-42 inch LED LCD flat and curved screen TVs and monitors weighing up to 44 lbs, with VESA mounting patterns up to 200x200mm. Its full motion capabilities allow for tilting, swiveling, extension, and rotation, enhancing your viewing experience and saving space.

Figure 1: Pipishell Full Motion TV Monitor Wall Mount Bracket.

안전 정보

Please read all instructions carefully before installation. Incorrect installation may result in property damage or personal injury. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer service.

• 설치 표면이 마운트와 디스플레이의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
• Do not mount on drywall alone. This mount requires installation into a single wood stud, solid concrete, or brick wall.
• Use all provided hardware. Do not use the concrete anchors for drywall installation.
• Always have at least two people for installation, especially when lifting the display.
• 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
• 모든 연결이 안전하게 유지되도록 주기적으로 확인하십시오.

Figure 2: Illustration of compatible wall types for mounting: single wood stud, solid concrete, and brick wall. A crucial warning indicates that the mount should not be installed on drywall alone.

패키지 내용

Before beginning installation, verify that all parts are present and undamaged. If any parts are missing or defective, contact Pipishell customer service.

Figure 3: All components included in the package: the wall plate, TV brackets, instruction manual, and various bags of screws, spacers, and anchors for different installation needs.

• 벽판 조립체
• TV 브래킷 (4개)
• 사용 설명서
• Assorted Screws, Washers, and Spacers for TV/Monitor attachment
• Lag Screws and Concrete Anchors for wall mounting
• 앨런 렌치

명세서

Figure 4: Detailed VESA mounting patterns supported by the mount, including 100x100mm, 75x75mm, 100x200mm, 200x100mm, and 200x200mm, along with screen size and max load capacity.

설정 및 설치

This section guides you through the process of securely mounting your TV or monitor. It is recommended to have assistance during installation.

1. Check Compatibility

Before starting, ensure your TV or monitor meets the following criteria:

• 화면 크기: 13인치에서 42인치 사이.
• 무게: 최대 44파운드(20kg).
• 베사 패턴: Compatible with 75x75mm, 100x100mm, 100x200mm, 200x100mm, and 200x200mm.

2. 벽 종류를 선택하세요

이 마운트는 다음 위치에 설치하도록 설계되었습니다:

• Single Wood Stud
• Solid Concrete Wall
• 벽돌 벽

3. Installation Steps (Single-Stud Examp르)

The following steps outline a typical single-stud installation. Refer to the included instruction manual for detailed steps for all wall types.

1. Step 1: Mount Wall Plate. Position the wall plate on your chosen wall location, ensuring it is level and aligned with a wood stud. Mark and drill pilot holes, then secure the wall plate using the appropriate lag screws.
2. Step 2: Attach TV Brackets. Secure the TV brackets to the back of your TV or monitor using the correct screws and spacers from the hardware kit, matching your display's VESA pattern.
3. Step 3: Hang TV. Carefully lift the TV with the attached brackets and hook them onto the wall plate assembly. Ensure the TV is securely seated and locked into place.

Figure 5: Visual guide for the three main steps of single-stud installation: mounting the wall plate, attaching TV brackets, and hanging the TV onto the mount.

작동 지침

Your Pipishell Full Motion TV Mount offers various adjustments for optimal view각도를 나타냅니다.

• 기울기 조정: The mount allows for a tilt range of +9° (upward) to -11° (downward) to reduce glare and achieve a comfortable viewing angle. Loosen the tilt bolts, adjust to the desired angle, and then re-tighten securely.
• 회전 조정: Swivel your display up to 90° left or right, depending on your screen size, to direct the screen towards your seating position. Gently push or pull the display to the desired angle.
• 확장 및 수축: Extend the TV up to 14.59 inches from the wall for closer viewing or retract it back to 2.7 inches to save space when not in use.
• 회전: Rotate the screen 360° to switch between landscape and portrait orientation. This feature is particularly useful for computer monitors.

Figure 6: Demonstrates the 360-degree rotation feature for changing screen orientation and the ±90-degree swivel capability for flexible view각도를 나타냅니다.

Figure 7: Illustrates the tilt function (+9°/-11°) to reduce glare and the extension/retraction feature (extends 14.59", retracts 2.7") for space-saving.

유지

정기적인 유지 관리는 TV 거치대의 수명 연장과 안전한 작동을 보장합니다.

• 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
• 연결 확인: Periodically (e.g., every 6 months) check all screws and bolts to ensure they are tight and secure. Over time, vibrations or adjustments can cause fasteners to loosen.
• 매끄럽게 하기: If the articulating arm or swivel points become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

문제 해결

If you encounter any issues with your Pipishell TV mount, refer to the common problems and solutions below.

• Mount feels wobbly after installation:
  • Ensure the mount is installed into a solid structural support (wood stud, concrete, or brick), not just drywall.
  • Verify all lag screws securing the wall plate to the wall are fully tightened.
  • Check that the TV brackets are securely attached to the TV and properly hooked onto the wall plate.
• 기울기 또는 회전 조절에 어려움이 있습니다.
  • For tilt adjustment, ensure the tilt bolts on the TV plate are loosened before attempting to adjust, and re-tighten them afterward.
  • For swivel, ensure no cables are snagged or restricting movement.
  • If movement is stiff, apply a small amount of silicone lubricant to the pivot points.
• TV가 수평이 아닙니다:
  • Check the level of the wall plate during installation. Minor adjustments can often be made by slightly loosening and re-tightening the screws on the TV brackets where they attach to the mount.
• 잃어버린 부분들:
  • Refer to the "Package Contents" section and contact Pipishell customer service immediately for replacement parts.

보증 및 지원

Pipishell stands behind the quality of its products. This TV wall mount is constructed from high-quality steel materials.

• 보증: We provide a 5-year friendly customer service for this product.
• 고객 서비스: If you have any questions, concerns, or require assistance with your product, please feel free to contact us anytime. Refer to the contact information provided in the original product packaging or on the Pipishell official web지원 사이트입니다.