1. 서론
The Inkbird ITC308S is a reliable and easy-to-use temperature controller designed for precise temperature management in various applications, particularly aquariums. It features dual relay outputs for both heating and cooling devices, ensuring stable temperature control. The unit includes a fully submersible probe for accurate temperature readings in liquid environments.
2. 안전 정보
- Ensure the power supply matches the controller's requirements (110V for this model).
- Do not immerse the main controller unit in water. Only the probe is submersible.
- 유지보수 또는 설치 작업을 하기 전에 항상 전원을 차단하십시오.
- 기기를 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
- 부품이 손상된 경우에는 기기를 사용하지 마십시오.
3. 패키지 내용
- ITC308S Temperature Controller Unit
- Submersible Temperature Probe
- Suction Cup for Probe Mounting
- 사용자 설명서
그림 3.1: The Inkbird ITC308S Temperature Controller and its included accessories, packaged in a brown box.
4. 제품 오버view
The ITC308S features a main control unit with a dual LED display, showing both the present value (PV) and set value (SV) temperatures. It has dedicated outlets for heating and cooling devices, and a detachable submersible probe for accurate temperature sensing.
그림 4.1: 위에view of the Inkbird ITC308S controller, showing the display, control buttons, power cord, and probe connection.
그림 4.2: The dual power outlets, clearly marked for 'HEATING' and 'COOLING' devices.
그림 4.3: The submersible temperature probe, designed for accurate readings in water, shown with its suction cup.
5. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | ITC-308S |
| 권tage | 120볼트(AC) |
| 최대 출력 부하 | 1200W(110V) |
| 온도 조절 모드 | On/Off Control (Heating and Cooling) |
| 프로브 유형 | Fully Submersible Aquarium Probe |
| 디스플레이 유형 | LED Dual Display |
| 재료 | 플라스틱 |
| 색상 | Green, Gray and White |
6. 설정 지침
- 프로브를 연결하십시오: Plug the submersible temperature probe into the designated port on the main controller unit. Use the provided suction cup to secure the probe inside your aquarium or water bath, ensuring it is fully submerged and away from direct heat sources or strong currents.
- 난방/냉방 장치 연결: Plug your heating device (e.g., aquarium heater) into the 'HEATING' outlet and your cooling device (e.g., cooling fan) into the 'COOLING' outlet on the power strip. Ensure devices are rated within the controller's maximum output load (1200W).
- 전원 켜기: Plug the main power cord of the ITC308S controller into a standard 110V AC power outlet. The LED display will illuminate, showing the current temperature (PV) and the set temperature (SV).
그림 6.1: The submersible probe correctly placed within an aquarium, ensuring accurate temperature measurement.
7. 사용 설명서
- View Current Temperature (PV): The upper LED display shows the current measured temperature (Process Value).
- View 설정 온도(SV): The lower LED display shows the desired set temperature (Set Value).
- 설정 온도:
- 를 누르세요 세트 버튼을 한 번 누르세요. SV 디스플레이가 깜박입니다.
- 사용하세요 위로(▲) or 아래로(▼) 버튼을 눌러 원하는 온도를 조절하세요.
- 누르다 세트 설정을 확인하고 저장하려면 다시 한 번 누르거나, 자동으로 저장될 때까지 몇 초간 기다리세요.
- 난방/냉방 표시: The 'HEATING' or 'COOLING' indicator lights will illuminate when the respective outlet is active.
- 온도 교정: Refer to the detailed instructions in the included paper manual for advanced settings like temperature calibration, differential settings, and alarm parameters. These settings allow fine-tuning of the controller's response.
- 경보 : The controller features over-temperature and sensor fault alarms. If an alarm triggers, the display will show an error code (e.g., 'HHH' for over-temperature, 'LLL' for under-temperature, 'ERR' for sensor fault) and an audible alert may sound. Address the issue promptly.
8. 유지관리
- 프로브 청소: Regularly inspect and clean the submersible probe to prevent algae or mineral buildup, which can affect accuracy. Use a soft cloth and mild cleaning solution if necessary.
- 컨트롤러 유닛: Wipe the main controller unit with a dry, soft cloth. Do not use abrasive cleaners or immerse it in water.
- 케이블 검사: Periodically check all cables for any signs of wear, cuts, or damage. Replace if necessary.
9. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 비어 있습니다. | 전원 공급이 없습니다 | 전원 연결과 콘센트를 확인하세요. |
| 온도 측정이 정확하지 않습니다 | Probe dirty or improperly placed; calibration needed | Clean probe, ensure proper submersion, perform temperature calibration. |
| Heating/Cooling device not turning on | Device not plugged in correctly; controller settings incorrect; device malfunction | Verify device connection to correct outlet, check set temperature and differential, test device independently. |
| 경보음이 자주 울립니다 | Temperature outside set range; alarm limits too narrow | Adjust set temperature or alarm high/low limits. Ensure heating/cooling devices are functioning. |
| 'ERR' displayed | 센서 오류 | Check probe connection. If error persists, the probe may need replacement. |
10. 보증 및 지원
Inkbird products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official Inkbird web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.