소개
This manual provides essential information for the safe and effective use of your Amazon Basics UPS Battery Backup & Surge Protector. Please read these instructions thoroughly before installation and operation, and retain them for future reference.
이미지: 앞면 view of the Amazon Basics UPS Battery Backup & Surge Protector. This unit is designed to provide uninterrupted power and surge protection for electronic devices.
중요한 안전 정보
화재, 감전, 부상의 위험을 줄이기 위해 이 제품을 사용할 때는 항상 기본적인 안전 예방 조치를 따르세요.
- Do not open or disassemble the UPS unit. There are no user-serviceable parts inside.
- Do not use the UPS in environments with excessive humidity or extreme temperatures.
- 무정전 전원 공급 장치(UPS)가 접지된 콘센트에 연결되어 있는지 확인하십시오.
- Avoid overloading the UPS. Refer to the specifications for maximum capacity.
- Disconnect the UPS from the power source before cleaning or maintenance.
- 이 제품에는 캘리포니아주에서 암과 선천적 결함 또는 기타 생식적 피해를 일으키는 것으로 알려진 화학 물질이 포함되어 있습니다.
설치 가이드
Follow these steps to set up your UPS for the first time:
- 짐 풀기: UPS를 포장에서 조심스럽게 꺼내십시오. 손상 여부를 확인하십시오.
- 초기 청구 : Before connecting any devices, plug the UPS into a standard wall outlet for at least 8 hours to ensure the battery is fully charged. This optimizes battery performance and lifespan.
- 놓기: Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The mini tower design allows for easy placement under desks or in entertainment centers.
- 연결 장치:
- Connect critical devices (e.g., computer, monitor, router) to the 5 surge-protected/battery-backup outlets (NEMA 5-15R). These outlets provide power during outag에스.
- Connect non-critical devices (e.g., printer, scanner) to the 5 surge-protected outlets. These outlets only provide surge protection.
- 소프트웨어 설치(선택 사항): Power management software is available for download. This software allows for advanced monitoring and configuration of the UPS, including automatic PC shutdown during extended outages. Connect the UPS to your computer using the provided USB cable for software communication.
이미지: 후면 view of the Amazon Basics UPS, highlighting the 10 outlets (5 surge-protected and 5 battery-backup) and the 6-foot power cord with a NEMA 5-15P right-angle plug.
Image: The USB cable included with the Amazon Basics UPS, used for connecting the UPS to a computer for power management software functionality.
작동 지침
The Amazon Basics UPS operates automatically to protect your connected devices.
- 전원 켜기/끄기: UPS를 켜거나 끄려면 제품 전면에 있는 전원 버튼을 누르십시오.
- 자동 볼륨tage 규정(AVR): The UPS features AVR to stabilize incoming AC power, protecting connected equipment from voltag배터리 전력을 사용하지 않고 변동을 감지합니다.
- 배터리 백업 : 정전이 발생한 경우tage, the UPS will automatically switch to battery power, providing continuous power to connected battery-backup outlets. The runtime varies based on the power consumption of connected devices. At half load (750VA/450W), the UPS provides approximately 10 minutes of backup power. At full load (1500VA/900W), it provides approximately 1.5 minutes of backup power.
- 가청 경보: The UPS emits audible alarms to indicate status changes, such as switching to battery mode or low battery. The alarm tone may become faster as battery power depletes.
- 과부하 보호: If the connected load exceeds the UPS's capacity, an overload alarm will sound, and the unit may shut down to prevent damage. Disconnect non-essential devices to reduce the load.
Image: Close-up of the front panel of the Amazon Basics UPS, showing the power button, mute button, and indicator lights for Online, On Battery, AVR, and Overload status.
유지
적절한 유지관리는 UPS의 수명과 안정성을 보장합니다.
- 배터리 교체: The internal battery is designed for a specific lifespan. When the battery capacity significantly degrades, it should be replaced by qualified personnel. Refer to the warranty section for service options.
- 청소: UPS 외부를 닦을 때는 마른 부드러운 천을 사용하십시오. 액체 또는 에어로졸 세척제는 사용하지 마십시오.
- 저장: If storing the UPS for an extended period, ensure the battery is fully charged, then disconnect it from the power source. Recharge the battery every 3-6 months to prevent deep discharge.
- 부하 관리: For optimal system performance, keep the total load below 80% of the unit's rated capacity (900W for this model).
문제 해결
If you encounter issues with your UPS, consult the following table:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| UPS가 켜지지 않습니다. | 배터리가 연결되지 않았거나 방전되었습니다. | Ensure the battery is properly connected. Charge the UPS for at least 8 hours. |
| UPS가 계속해서 경고음을 울립니다. | 과부하 상태. | Disconnect non-essential equipment. Reduce the total load to within the UPS's capacity. |
| 배터리 작동 시간이 짧습니다. | 배터리가 완전히 충전되지 않았거나 수명이 다해가고 있습니다. | Allow the UPS to charge for 8 hours. If the problem persists, the battery may need replacement. |
| UPS does not provide power during an outage. | Devices connected to surge-only outlets. | Ensure critical devices are connected to the battery-backup outlets. |
명세서
- 모델: ABMT1500
- 용량: 1500VA / 900W
- 아울렛: 10 total (5 surge-protected, 5 surge-protected/battery-backup NEMA 5-15R)
- 입력 Voltage: 100 볼트
- 배터리 유형: 납산
- Typical Runtime (Half Load): Approximately 10 minutes (750VA/450W)
- Typical Runtime (Full Load): Approximately 1.5 minutes (1500VA/900W)
- 크기(가로x세로x높이): 13.7 x 3.9 x 9.8인치(34.8 x 9.91 x 24.89cm)
- 무게: 25파운드(11.34kg)
- 색상: 검은색
Image: Diagram showing the dimensions of the Amazon Basics UPS, with measurements in both inches and centimeters.
보증 및 지원
This Amazon Basics UPS is backed by a limited 1-year warranty, including the battery. Additionally, it includes a $75,000 connected equipment guarantee.
- For detailed warranty information, please refer to the official warranty document provided with your product or available for download from the product page.
- For technical support or warranty claims, please contact Amazon customer service.
- Additional resources, including user guides and software downloads, can be found in the "Product guides and documents" section on the Amazon product page.
메모: The connected equipment guarantee is subject to specific terms and conditions. Please review these terms carefully.