Wathai 9225B12V2P2.5

Wathai 9225 92mm x 25mm 12V DC Brushless Computer Case Fan Instruction Manual

Model: 9225B12V2P2.5 | Brand: Wathai

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your Wathai 9225 92mm x 25mm 12V DC Brushless Computer Case Fan. Please read these instructions carefully before use to ensure safe and efficient performance.

2. 안전 정보

  • Ensure the power source matches the fan's rated voltag전자(12V DC).
  • 설치, 유지관리 또는 문제 해결을 하기 전에 전원을 분리하세요.
  • 움직이는 선풍기 날개를 만지지 마십시오.
  • 선풍기를 물과 과도한 습기로부터 멀리하십시오.
  • Do not obstruct the fan's airflow.
  • Handle with care to prevent damage to the fan blades or wiring.

3. 제품 특징

  • 치수: 92mm(L) x 92mm(W) x 25mm(H) / 3.62x3.62x0.98 inches.
  • 권tage: 12V DC.
  • 현재의: 0.16A.
  • 속도: 2500 RPM.
  • 공기 흐름: 54.8 씨프롬.
  • 소음 수준: 31dBA.
  • 커넥터: XH2.54-2Pin.
  • 베어링 유형: Dual Ball Bearing, offering a lifespan of 50,000 hours.
  • Designed for versatile mounting (flat or upright).
Wathai 9225 fan dimensions and specifications
Figure 1: Detailed dimensions and electrical specifications of the Wathai 9225 fan.
Wathai 9225 fan with dual ball bearings
Figure 2: Illustration of the dual ball bearing design, contributing to extended fan lifespan.

4. 사양

기인하다
제품 치수3.62인치 길이 x 3.62인치 너비 x 1인치 높이(92mm x 92mm x 25mm)
상표와타이
전원 커넥터 유형2-Pin (XH2.54)
권tage12볼트(DC)
왓tage2 와트
냉각 방식팬 냉각
소음 수준31데시벨
재료플라스틱
최대 회전 속도2500 RPM
기류 용량54.8 분당 입방피트(CFM)
베어링 유형듀얼 볼 베어링
케이블 길이30cm(12인치)

5. 설정 및 설치

This section outlines the general steps for installing the Wathai 9225 fan. Specific installation may vary depending on your application.

  1. 전원 차단: Before beginning, ensure that the power to the device or system where the fan will be installed is completely disconnected.
  2. 장착 위치: Identify a suitable mounting location for the fan. The fan can be mounted flat or upright. Ensure there is adequate space for airflow.
  3. 정위: Observe the airflow direction indicated by arrows on the fan frame (if present) to ensure proper cooling or exhaust.
  4. 안전한 장착: Use appropriate screws or mounting hardware to securely attach the fan to the desired surface. The fan dimensions are 92mm x 92mm x 25mm.
  5. 전기 연결: Connect the fan's 2-pin XH2.54 connector to a compatible 12V DC power source. Ensure correct polarity (red wire to positive, black wire to negative). If the existing connector is incompatible, the fan's wires can be modified by a qualified technician.
  6. 케이블 관리 : Route the fan cable safely, ensuring it does not interfere with other components or moving parts.
  7. 전원 복원: Once the fan is securely installed and connected, restore power to the system.
  8. 기능성 테스트: Verify that the fan operates correctly and provides the intended airflow.
Wathai 9225 fan air outlet diagram showing inlet and outlet air flow
Figure 3: Airflow direction diagram for proper fan installation.
Video 1: A short demonstration of fan installation and connection in a cooling application. This video shows the fan being placed and connected to a circuit board.

6. 사용 설명서

The Wathai 9225 fan operates upon receiving a stable 12V DC power supply. It is designed for continuous operation.

  • Ensure the fan is connected to a compatible 12V DC power source.
  • Once powered, the fan will begin to rotate, providing airflow.
  • Monitor the fan for any unusual noises or vibrations during initial operation.

7. 유지관리

정기적인 유지 관리는 최적의 성능을 보장하고 선풍기의 수명을 연장하는 데 도움이 됩니다.

  • 청소: Periodically inspect the fan blades and housing for dust accumulation. Disconnect power before cleaning. Use a soft brush or compressed air to gently remove dust. Do not use liquids or harsh chemicals.
  • 점검: Check for any loose connections or damaged wiring. Ensure mounting screws remain tight.
  • 베어링 수명: The dual ball bearings are designed for long life and typically do not require lubrication.

8. 문제 해결

문제가능한 원인해결책
팬이 회전하지 않습니다.No power, incorrect wiring, faulty fan.Check power supply. Verify correct polarity (red to +, black to -). Inspect wiring for damage. If issues persist, the fan may be faulty.
팬이 시끄럽거나 진동이 지나치게 심합니다.Dust accumulation, loose mounting, damaged blades/bearings.Clean fan blades. Tighten mounting screws. Inspect blades for damage. If noise persists, bearings may be worn.
공기 흐름이 충분하지 않습니다.Obstructed airflow, incorrect fan orientation, fan operating below rated speed.Clear any obstructions. Verify fan is oriented correctly for desired airflow (inlet/outlet). Ensure stable 12V DC power supply.

9. 응용 프로그램

The Wathai 9225 fan is suitable for various cooling and ventilation projects due to its compact size and 12V DC operation.

  • Small solar panel cooling systems.
  • Computer case ventilation.
  • Dehumidifiers and TV refrigerators.
  • Space heaters and grow tents.
  • Wine coolers and electric boats.
  • Portable dryers and other audio/video electronics.
  • Replacing OEM fans in travel trailers or RV refrigerators.
  • DIY cooling projects.
Wathai 9225 fan shown in various applications including a computer case, drive tower, portable dryer, grow tent, and small solar panel
그림 4: 예amples of common applications for the Wathai 9225 fan.

10. 보증 및 지원

For warranty information or technical support, please refer to the seller's policy on the purchase platform or contact Wathai customer service directly. Keep your purchase receipt for warranty claims.

Wathai products are designed and manufactured with quality in mind. All products have passed CE & ROHS certification.

© 2024 Wathai. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.