1. 서론
This manual provides comprehensive instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of the Mettler Toledo XSR105DU Analytical Balance. Please read this manual thoroughly before using the instrument to ensure accurate results and prolong the life of your balance.
This image displays the Mettler Toledo XSR105DU Analytical Balance. It features a clear glass draft shield enclosing the weighing pan, a separate digital display unit showing '0.00000' grams, and the main balance unit with 'METTLER TOLEDO' branding visible on the side.
2. 안전 정보
부상과 기기 손상을 방지하기 위해 항상 다음 안전 예방 조치를 준수하세요.
- 저울은 진동이나 바람이 없는 안정적이고 평평한 환경에서만 작동하십시오.
- Do not expose the balance to extreme temperatures or humidity.
- 기기에 제공된 전원 어댑터만 사용하십시오.
- Avoid spilling liquids on the balance. In case of spillage, disconnect power immediately and clean carefully.
- 저울을 직접 열거나 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
- Ensure the weighing pan is clean and free of debris before each use.
3. 상자 안에 무엇이 들어있나요?
포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.
- Mettler Toledo XSR105DU Analytical Balance
- 전원 어댑터
- Draft Shield Components
- 계량 팬
- 사용 설명서 (본 문서)
4. 설정
4.1 풀기
포장에서 저울과 모든 부속품을 조심스럽게 꺼내십시오. 향후 운송 또는 보관을 위해 원래 포장재를 보관하십시오.
4.2 배치
Place the analytical balance on a stable, level, and vibration-free surface. Ensure it is away from direct sunlight, heat sources, air currents (e.g., from air conditioning vents), and strong electromagnetic fields. Use the adjustable feet to level the balance, observing the integrated level indicator.
4.3 전원 연결
Connect the supplied power adapter to the balance and then to a suitable power outlet. Allow the balance to warm up for at least 30 minutes after connecting power before performing any measurements to ensure optimal stability.
4.4 초기 교정
After initial setup and warm-up, perform an internal calibration. Refer to the on-screen prompts or the balance's menu for the specific calibration procedure. Regular calibration is crucial for maintaining measurement accuracy.
5. 사용 설명서
5.1 기본 계량
- Ensure the balance is level and the draft shield doors are closed.
- Press the 'On/Off' button to power on the balance.
- Wait for the display to show '0.00000g' and the Status Light to indicate readiness.
- 조심스럽게 s를 배치하십시오.ample on the center of the weighing pan.
- 화면에 표시된 안정 중량 값을 읽으십시오.
- s를 제거amp팬에서 르.
5.2 용기 기능
무게를 측정하다ample in a container, use the tare function:
- 빈 용기를 저울 접시 위에 올려놓으세요.
- Press the 'Tare' button (usually indicated by a 'T' or '0/T' symbol). The display will reset to '0.00000g'.
- 당신의 s를 추가하세요amp컨테이너에 담으세요. 디스플레이에는 제품의 순중량이 표시됩니다.amp르.
- Remove the container and samp팬에서 르.
5.3 고급 기능
The XSR105DU features advanced functionalities to streamline weighing workflows:
- Smart Grid Weighing Pan: Designed for easy cleaning and efficient samp르 배치.
- Automated Doors: For convenient and precise sample handling, minimizing external influences.
- Results Protocol: The balance can generate and store results protocols, simplifying data management.
- Built-in Methods: Utilize pre-programmed weighing methods or develop and save your own custom methods directly from the method window for specific applications.
- 상태 표시등: Provides visual feedback, indicating when all conditions for correct weighing have been met, ensuring reliable results.
6. 유지관리
6.1 청소
Regular cleaning is essential for accurate and reliable operation:
- 청소하기 전에 밸런스 장치의 전원을 차단하십시오.
- 부드럽고 보풀이 없는 천을 사용하십시오. dampened with a mild detergent solution or isopropyl alcohol.
- 연마성 세척제나 용제를 사용하지 마십시오.
- Clean the weighing pan and draft shield components regularly. These parts can often be removed for thorough cleaning.
- Ensure no liquid enters the interior of the balance.
6.2 교정 점검
Perform routine calibration checks as recommended by Mettler Toledo or your internal quality procedures. This ensures the balance maintains its accuracy over time. If deviations are found, perform a full calibration.
6.3 보관
When not in use for extended periods, store the balance in a clean, dry, and stable environment. Cover the balance to protect it from dust and debris.
7. 문제 해결
이 섹션에서는 다음과 같은 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 밸런스 기능이 켜지지 않습니다. | 전원 공급 안 됨; 전원 어댑터 불량 | Check power cable connection; Try a different outlet; Contact support if adapter is faulty. |
| 불안정한 판독 | Vibrations; Air currents; Unlevel surface; Temperature fluctuations | Relocate balance to a stable area; Close draft shield doors; Level the balance; Allow balance to acclimatize. |
| 부정확한 판독 | Needs calibration; Dirty weighing pan; Overload | Perform calibration; Clean weighing pan and surrounding area; Ensure sample weight is within capacity. |
| 디스플레이의 오류 메시지 | 특정 내부 문제 | Refer to the balance's on-screen help or contact Mettler Toledo support with the error code. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | XSR105DU |
| 상표 | Mettler 톨레도 (Toledo) |
| 용량 무게 | 120g |
| 제품 크기(L x W x H) | 18.98 x 7.68 x 11.5 인치 |
| 제품 무게 | 26 파운드 |
| 제조업체 | Mettler 톨레도 (Toledo) |
| 첫 번째 이용 가능 | 2년 2019월 XNUMX일 |
9. 보증 및 지원
The Mettler Toledo XSR105DU Analytical Balance is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Mettler Toledo web대지.
For technical support, service, or inquiries regarding your analytical balance, please contact Mettler Toledo customer service. Have your model number (XSR105DU) and serial number ready when contacting support.
메모: 이 설명서에 삽입할 수 있는 판매자의 공식 제품 비디오는 없습니다.