Suptek MD6SB Dual Monitor Arm Pole Mount Instruction Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Suptek MD6SB Dual Monitor Arm. This product is designed to mount two monitors to a pole, optimizing your workspace and improving viewing ergonomics. Please read this manual thoroughly before installation and keep it for future reference.

2. 제품 오버view

2.1. 주요 특징

• 극 장착: Designed for secure attachment to poles with a diameter of 35mm.
• 듀얼 모니터 지원: Accommodates two monitors simultaneously.
• 폭넓은 호환성: Supports monitors from 13 to 27 inches.
• 높은 하중 용량: Each arm can support up to 10kg (22 lbs).
• VESA 규정 준수: VESA 75x75mm 및 100x100mm 마운팅 패턴과 호환됩니다.
• 다중 각도 조정: Features ±90° tilt, ±90° swivel, and 360° rotation for optimal view각도를 나타냅니다.
• 케이블 관리 : Integrated cable clips help organize and protect monitor cables.
• 공간 절약: Frees up desk space by elevating monitors.

2.2. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• VESA 플레이트 x 2
• Arm Cord Bushing x 4
• 육각 렌치 x 1
• Rotating Arm x 1 (Main Assembly)
• M4 x 30mm 나사 x 8
• M4 x 12mm 나사 x 8
• 스페이서 x 8
• Red Washers x 8
• Black Washers x 8
• 너트 x 2

Figure 1: Package Contents. Includes VESA plates, arm assembly, various screws, washers, spacers, nuts, and a hex wrench.

3. 안전 정보

• Do not exceed the maximum load capacity of 10kg (22 lbs) per arm.
• Ensure the mounting pole is stable and capable of supporting the combined weight of the arm and monitors.
• Always use the provided hardware. If your monitor requires different screws, consult the monitor's manual.
• Perform installation with at least two people to prevent injury or damage.
• 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
• Tighten all screws firmly, but do not overtighten to avoid stripping threads.
• Regularly check the arm and monitor connections for security.

4. 설정 및 설치

4.1. 설치 전 확인

• Confirm your monitor's weight and size are within the specified limits (13-27 inches, max 10kg per arm).
• Verify your monitor has VESA 75x75mm or 100x100mm mounting holes.
• Ensure your pole has a diameter of 35mm.

4.2. Attaching the Arm to the Pole

1. Loosen the screws on the pole clamp of the rotating arm assembly.
2. Position the rotating arm assembly at the desired height on the 35mm diameter pole.
3. Tighten the screws on the pole clamp securely to fix the arm in place.

4.3. VESA 플레이트를 모니터에 부착하기

1. 모니터를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
2. Align a VESA plate with the mounting holes on the back of your monitor.
3. Use the appropriate M4 screws (M4 x 12mm or M4 x 30mm) and washers/spacers if needed, to secure the VESA plate to the monitor. Do not overtighten.
4. 두 번째 모니터에 대해서도 동일한 과정을 반복합니다.

4.4. Mounting Monitors to the Arm

1. With assistance, carefully lift a monitor with the attached VESA plate.
2. Slide the VESA plate onto the VESA head of one arm until it clicks into place or is securely fastened with the locking mechanism (if present).
3. Ensure the monitor is firmly attached before releasin지.
4. Repeat for the second monitor on the other arm.

Figure 2: Assembled Dual Monitor Arm. Shows the main arm structure with VESA plates ready for monitor attachment.

5. 사용 설명서

5.1. 모니터 위치 조정

The monitor arm allows for flexible adjustment to achieve optimal view편안함을.

• 기울기 조정: Gently push or pull the top or bottom of the monitor to adjust the tilt angle by ±90°.
• 회전 조정: Rotate the monitor left or right by ±90° at the arm joint.
• 회전: 모니터를 360° 회전하여 가로 모드와 세로 모드를 전환하세요.
• 팔 뻗기/움직이기: Move the arm segments to extend or retract the monitors, adjusting the distance from your view위치입니다.

Figure 3: Angle Adjustment. Shows how monitors can be tilted and swiveled.

Figure 4: 360° Monitor Rotation. Demonstrates switching between landscape and portrait modes.

5.2. 케이블 관리

Utilize the integrated cable clips along the arm to route and secure your monitor cables. This helps maintain a tidy workspace and prevents cable damage.

6. 유지관리

• 정기 점검: Periodically inspect all screws and connections to ensure they remain tight and secure.
• 청소: 모니터 암을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
• 매끄럽게 하기: No lubrication is typically required for the moving parts. If movement becomes stiff, contact support.

7. 문제 해결

7.1. Monitor Sags or Does Not Hold Position

• 중량 확인: Ensure the monitor weight does not exceed 10kg per arm.
• 조인트를 조이세요: Use the provided hex wrench to tighten the tension screws at the arm joints and VESA head. Refer to the assembly diagrams for screw locations.

7.2. Arm is Loose on the Pole

• Tighten Pole Clamp: Ensure the screws on the pole clamp 완전히 조여졌습니다.
• Check Pole Diameter: Confirm the pole diameter is 35mm. If it's smaller, the arm may not secure properly.

7.3. Difficulty Attaching VESA Plate to Monitor

• Correct Screws: Ensure you are using the correct M4 screws (12mm or 30mm) and spacers if necessary, to match your monitor's VESA mounting depth.

8. 사양

Figure 5: Product Dimensions and VESA Compatibility. Illustrates overall arm length and VESA mounting hole patterns.

9. 보증 및 지원

9.1. 보증 정보

This Suptek product comes with a 1년 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

9.2. 고객 지원

If you encounter any issues or have questions regarding your Suptek product within the warranty period, please contact us through the following steps:

1. Amazon 계정에 로그인하세요.
2. Go to "Account Service" (or "Your Account").
3. Navigate to "Order History" (or "Your Orders").
4. Find your order for the Suptek MD6SB Dual Monitor Arm.
5. "판매자" 링크를 클릭하세요.
6. Select "Ask a question" to send a message to our support team.

Please include your order number in your message for faster service. Our team is committed to providing prompt and effective solutions to your concerns.