SAMSON PXD1

Samson PXD1 Wireless Lavalier Microphone Transmitter for USB User Manual

Model: PXD1

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your Samson PXD1 Wireless Lavalier Microphone Transmitter. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its performance. The PXD1 is designed to capture audio wirelessly and transmit it to your Mac or Windows computer via a compatible USB receiver (sold separately).

패키지 내용

아래 나열된 모든 품목이 패키지에 들어 있는지 확인하세요.

  • Samson PXD1 Wireless Lavalier Microphone Transmitter
  • 라 발리에 마이크
  • USB 충전 케이블
  • 사용 설명서 (본 문서)

제품 끝view

The Samson PXD1 is a compact and lightweight beltpack transmitter designed for wireless audio capture. It operates on the 2.4 GHz frequency band, providing reliable digital audio transmission.

Samson PXD1 Wireless Lavalier Microphone Transmitter

Figure 1: Samson PXD1 Wireless Lavalier Microphone Transmitter. This image shows the compact design of the PXD1 transmitter unit.

주요 구성 요소:

  • 전원 버튼: 기기를 켜고 끄는 데 사용됩니다.
  • 상태 LED : Indicates power, battery status, and pairing status.
  • 마이크 입력: 라발리에 마이크 연결용 3.5mm 잭.
  • USB 포트: 내부 배터리를 충전합니다.
  • 벨트 클립: For attaching the transmitter to clothing or a belt.

설정

  1. 송신기를 충전하세요: Connect the PXD1 transmitter to a USB power source using the provided USB cable. The Status LED will indicate charging status. Ensure the unit is fully charged before first use.
  2. Connect the Lavalier Microphone: Plug the lavalier microphone's 3.5mm connector into the Microphone Input jack on the PXD1 transmitter. Secure the microphone to your clothing, approximately 6-8 inches from your mouth, for optimal sound capture.
  3. Pair with USB Receiver: The PXD1 requires a compatible Samson USB receiver (sold separately) to function.
    • Turn on the PXD1 transmitter by pressing and holding the Power Button until the Status LED illuminates.
    • Plug the Samson USB receiver into an available USB port on your Mac or Windows computer.
    • Follow the pairing instructions provided with your specific Samson USB receiver. Typically, this involves pressing a pairing button on both the transmitter and receiver until a solid connection is indicated by their respective status LEDs.
  4. 컴퓨터에 연결: Once paired, your computer should recognize the USB receiver as an audio input device. Select it as your input device in your operating system's sound settings and your preferred digital audio software.

작동 지침

  1. 전원 켜기/끄기: Press and hold the Power Button for approximately 2 seconds to turn the PXD1 on or off. The Status LED will light up when powered on.
  2. Monitor Audio Levels: Before recording or live streaming, perform a sound check. Speak into the lavalier microphone at your normal speaking volume and monitor the input levels in your digital audio software. Adjust the input gain on your computer or software as needed to prevent clipping (distortion) and ensure a strong signal.
  3. 위치: Ensure the lavalier microphone is positioned correctly to capture clear audio. Avoid placing it where it might rub against clothing, which can cause unwanted noise.
  4. 범위: Maintain a clear line of sight between the PXD1 transmitter and the USB receiver for optimal wireless performance. Obstacles can reduce the effective range.
  5. 배터리 수명: The Status LED will change color or flash to indicate low battery. Recharge the unit promptly when this occurs.

유지

  • 청소: Use a soft, dry cloth to clean the exterior of the PXD1 transmitter. Do not use liquid cleaners or solvents.
  • 저장: When not in use, store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures.
  • 배터리 관리 : 배터리 수명을 최적화하려면 배터리를 자주 완전히 방전시키지 마십시오. 장기간 보관할 경우 몇 달에 한 번씩 배터리를 약 50% 정도 충전하십시오.
  • 마이크 관리: Keep the lavalier microphone clean and free from dust or debris.

문제 해결

문제가능한 원인해결책
사운드 출력이 없습니다
  • 송신기가 켜져 있지 않습니다.
  • 수신기와 페어링되지 않았습니다.
  • Receiver not connected to computer.
  • Incorrect input device selected on computer/software.
  • 마이크가 연결되지 않았거나 고장났습니다.
  • Ensure PXD1 is powered on (Status LED lit).
  • 송신기와 수신기를 수리하십시오.
  • Verify USB receiver is securely plugged into computer.
  • Select the USB receiver as the audio input in your computer's sound settings and recording software.
  • Check microphone connection; try another microphone if available.
Poor audio quality / Distortion
  • 입력 게인이 너무 높습니다.
  • 다른 2.4GHz 기기로부터의 간섭.
  • 송신기와 수신기 사이의 거리가 너무 멀다.
  • 배터리가 부족합니다.
  • Reduce input gain on your computer or software.
  • Wi-Fi 라우터나 기타 무선 장치에서 멀리 떨어지세요.
  • Reduce distance between transmitter and receiver; ensure clear line of sight.
  • Recharge the PXD1 transmitter.
Transmitter won't turn on
  • 배터리가 완전히 방전되었습니다.
  • 결함이 있는 장치입니다.
  • Connect to USB power source and allow time to charge.
  • If still unresponsive after charging, contact Samson support.

명세서

상표:
삼손
모델 이름:
PXD1
연결 기술 :
USB (via compatible receiver)
커넥터 유형:
USB (for charging/receiver connection)
극성 패턴:
Unidirectional (Lavalier Microphone)
품목 무게:
2.4 온스
항목 치수(L x W x H):
3.6 x 2.2 x 0.9 인치
전원:
유선 전기(USB 전원 사용)
추천 용도:
Podcasting, Voice Recording
호환 장치:
Personal Computer (Mac/Windows)
제조업체 부품 번호:
SWXPD1BP
한국어:
809164218579

보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Samson web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

Samson Official Web대지: www.samsontech.com

© 2023 Samson Technologies. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.