단조 마운트 HY9401-B
FORGING MOUNT Long Extension TV Mount Instruction Manual
모델: HY9401-B
소개
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your FORGING MOUNT Long Extension TV Mount. Please read this manual thoroughly before beginning installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.
Image: The FORGING MOUNT Long Extension TV Mount, showcasing its dual articulating arms and wall plate.
안전 정보
경고: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact customer service.
- Do not install this product into drywall alone. It must be mounted into wood studs, solid concrete, or brick walls.
- 벽 구조가 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- 최대 하중 용량 198파운드(90kg)을 초과하지 마십시오.
- Verify VESA compatibility with your television before installation.
- 설치 시에는 눈 보호구를 포함한 적절한 안전 장비를 착용하십시오.
- Two people are recommended for installation due to the weight and size of the mount and television.
Image: Diagram illustrating compatible wall types (wooden walls, concrete walls, brick walls) and a warning against installing on drywall alone. Also shows TV size and VESA compatibility checks.
패키지 내용
Please check the package contents against the list below to ensure all components are present and undamaged. If any parts are missing or damaged, contact customer service immediately.
- TV Wall Mount Assembly (Wall Plate, Articulating Arms, TV Brackets)
- 설치 하드웨어 키트(TV와 벽 사이의 간격을 조절하는 다양한 나사, 와셔, 스페이서 포함)
- 6 ft HDMI Cable
- 3-Axis Bubble Level
- Cable Ties (5 pieces)
- 사용 설명서
Image: Close-up of various mounting hardware components, including M4, M6, M8 screws, washers, and unique spacers designed for easier installation.
설정 및 설치
1. 설치 전 점검
- Check TV Size and Weight: This mount is designed for 50-90 inch TVs weighing up to 198 lbs (90 kg).
- VESA 패턴을 확인하세요: The mount supports VESA patterns from 100x100mm to 800x400mm. Measure the horizontal and vertical distance between the mounting holes on the back of your TV.
- 벽체 유형을 확인하세요: Identify your wall type (wood stud, solid concrete, or brick). Do not install on drywall alone.
Image: Diagram illustrating the wide compatibility of the mount, showing support for solid concrete, wood studs (16" and 12"), and brick walls, along with applicable VESA patterns (max 800x400mm, min 100x100mm) and maximum load of 198 lbs.
Image: Detailed chart of available VESA patterns supported by the mount, ranging from 100x100mm to 800x400mm.
2. 벽면 플레이트 장착
- Locate the desired mounting position on your wall. Use a stud finder to locate the center of two adjacent wood studs if mounting to wood. For concrete/brick, ensure the area is solid.
- Place the wall plate against the wall at the desired height and use the included bubble level to ensure it is perfectly horizontal.
- Mark the drill holes through the wall plate.
- Drill pilot holes according to the instructions for your specific wall type (wood studs, concrete, or brick).
- Secure the wall plate to the wall using the appropriate lag bolts and washers. Ensure it is firmly attached.
Image: Comparison showing the "Strong Wall Plate" design of the FORGING MOUNT, featuring strong, reliable, and solid hinges made of premium cold-rolled steel, contrasted with other mounts that may have hollow hinges and lack long-term stability.
3. Attaching TV Brackets to Television
- TV에 흠집이 생기지 않도록 부드럽고 깨끗한 표면에 TV 화면이 아래로 향하게 조심스럽게 놓으십시오.
- Identify the correct size screws (M4, M6, or M8) and spacers for your TV's VESA mounting holes.
- Attach the two vertical TV brackets to the back of your television using the selected screws and spacers. Ensure the brackets are centered and securely fastened. The unique spacer design helps align threaded holes.
Image: Illustration of the unique spacer design, showing how the inner ribs prevent screws from falling down and make it easier to align with the threaded holes on the back of the TV, compared to standard spacers.
4. Mounting Television to Wall Plate
- 도움을 받아 브래킷이 부착된 TV를 조심스럽게 들어 올리세요.
- Hook the TV brackets onto the wall plate. Ensure the brackets are securely seated on the mount's arms.
- Engage any safety locks or screws on the TV brackets to prevent accidental dislodgement.
마운트 작동
Your FORGING MOUNT TV mount offers full motion capabilities for optimal view각도를 나타냅니다.
- 확대: The mount extends up to 43 inches from the wall, allowing for maximum versatility and maneuverability.
- 경사: Adjust the tilt angle from +5° to -10° to reduce glare and optimize viewing. This can typically be adjusted by hand.
- 받침: Swivel the TV up to 180° left or right, depending on TV size and wall clearance, to achieve the perfect viewing angle from various positions in a room.
- 레벨 조정 : Fine-tune the level of your TV by ±3° after installation to ensure a perfectly straight display.
Image: Visual representation of the mount's full adjustment capabilities, including extending 43 inches from the wall, tilting +5° to -10°, swiveling 180°, and leveling ±3°.
Image: A large TV mounted on the wall, swiveling 90 degrees sideways, demonstrating the mount's ability to position the TV without hitting the wall, ideal for corner installations or view다른 지역에서 온 사람들.
Image: Diagram highlighting the 6-arm design for full adjustment and ultra-strong overload capacity, with close-ups of double socket holes, strong bracket arms, and safety lock features.
유지
정기적인 유지 관리는 TV 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 연결 확인: 모든 나사와 볼트가 단단히 조여져 있는지 주기적으로 확인하고, 필요한 경우 다시 조이십시오.
- 마모 검사: Inspect the articulating arms and joints for any signs of wear or damage. If any issues are found, discontinue use and contact customer support.
문제 해결
If you encounter any issues during or after installation, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Mount feels unstable or sags. | Incorrect wall installation; Exceeded weight capacity; Loose bolts. | Ensure mount is securely fastened to studs/concrete. Verify TV weight is within limits. Tighten all mounting bolts. |
| TV가 수평이 아닙니다. | Wall plate not level; TV brackets not adjusted. | Use the built-in level adjustment feature on the mount to fine-tune the TV's horizontal position (±3°). Re-check wall plate level if necessary. |
| Cannot extend or swivel smoothly. | 관절이 뻣뻣하고, 케이블이 걸렸습니다. | Apply a small amount of silicone lubricant to the joints if they are stiff. Ensure cables are managed and not obstructing movement. |
| 잃어버린 부분들. | 포장 오류. | Contact FORGING MOUNT customer service with your purchase details. |
명세서
- 상표: 단조 마운트
- 모델 번호: HY9401-B
- 재료: 합금강
- 색상: 검은색
- 품목 무게: 30파운드
- 제품 크기: 43 x 33 x 16인치 (완전히 펼쳤을 때)
- 장착 유형: 벽걸이형
- 이동 유형: Articulating, Tilt, Swivel, Level
- 호환 가능한 TV 크기: 50 ~ 90 인치
- 최대 부하 용량 : 198파운드(90kg)
- VESA 호환성: 100x100mm ~ 800x400mm
- 벽에서 확장: 최대 43인치
- 최대 기울기 각도: +5° ~ -10°
- 회전 각도: Up to 180° (TV size dependent)
- 레벨 조정 : ±3°
- 한국어: 700961558038, 715377510860
Image: Visual representation emphasizing the robust and reliable load-bearing capacity of the mount, rated for a maximum of 198 lbs.
보증 및 지원
FORGING MOUNT provides an incredible 5-year warranty for this product. For technical support, warranty claims, or any questions regarding your TV mount, please contact FORGING MOUNT customer service.
You can typically find contact information on the FORGING MOUNT official web해당 사이트를 통해서나 제품을 구매한 소매업체를 통해서도 구매가 가능합니다.
관련 문서HY9401-B
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.