소개
This manual provides detailed instructions for the safe and proper installation and use of your PERLESMITH PSML1-E TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact PERLESMITH customer support.
안전 정보
경고: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. Do not install this product on plasterboard, hollow walls, drywall, or soft walls. Only install on solid concrete walls, brick walls, or solid wood stud walls.
- 설치 표면이 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- 최대 중량 용량 52kg(114파운드)을 초과하지 마십시오.
- 이 거치대는 26인치에서 75인치 사이의 TV에 맞게 설계되었습니다.
- 설치 시에는 눈 보호구를 포함한 적절한 안전 장비를 착용하십시오.
- 목재 스터드를 정확하게 찾으려면 항상 스터드 파인더를 사용하십시오.
- If you are unsure about any part of the installation, seek professional assistance.
Image: Diagram highlighting the robust construction and 52kg weight capacity of the PERLESMITH TV mount, featuring secure dual hooks and a 3-layer solid steel plate.
호환성 확인
Before installation, verify the following:
- TV 크기 : Your TV must be between 26 and 75 inches.
- TV 무게: Your TV must weigh no more than 52 kg (114 lbs).
- 베사 패턴: Check the four mounting holes on the back of your TV. The VESA pattern (horizontal x vertical) must be within the range of 75x75 mm to 400x400 mm. Compatible VESA patterns include: 75x75, 100x100, 200x100, 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400 mm.
- 벽 유형: The mount is suitable for solid concrete walls, brick walls, or solid wood stud walls. Do NOT install on plasterboard, hollow walls, drywall, or soft walls.
Image: Diagram illustrating how to check TV VESA pattern, weight, size, and suitable wall types for installation.
Image: VESA compatibility diagram, illustrating the range of VESA patterns supported by the mount, from 75x75mm up to 400x400mm.
패키지 내용
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, contact PERLESMITH customer support.
Image: Main components of the PERLESMITH TV Wall Mount, showing the wall plate and the two vertical TV brackets.
패키지에는 일반적으로 다음이 포함됩니다.
- 월 플레이트
- TV 브래킷 (2개)
- Assorted TV Screws (M4, M6, M8)
- Spacers and Washers
- Wall Mounting Hardware (Lag bolts, concrete anchors)
- Level (for some kits)
- 사용 설명서
설정 및 설치
Follow these steps for a secure installation. A quick installation can be completed in approximately 15 minutes with proper tools and preparation.
1단계: TV 브래킷을 TV에 부착
- TV에 흠집이 생기지 않도록 부드럽고 깨끗한 표면에 TV 화면이 아래로 향하게 조심스럽게 놓으십시오.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use spacers if the TV back is uneven or if cables need clearance.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are centered and securely tightened. The hooks on the brackets should face downwards.
Image: Step 1 of the installation process, showing the TV brackets being attached to the back of the television.
2단계: 벽면 플레이트를 벽에 장착합니다.
- Determine the desired height for your TV. Mark the location for the wall plate on the wall.
- For wood stud installation: Use a stud finder to locate the center of the wood studs. Mark the drilling points. Drill pilot holes (recommended size specified in manual, typically 5.5mm/7/32"). Secure the wall plate using lag bolts and washers.
- For concrete/brick wall installation: Use the wall plate as a template to mark drilling points. Drill holes (recommended size specified in manual, typically 10mm/3/8"). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.
- Use a level to ensure the wall plate is perfectly horizontal before tightening all bolts.
3단계: 벽걸이 플레이트에 TV를 걸기
- 다른 사람의 도움을 받아 부착된 브래킷을 이용해 TV를 조심스럽게 들어 올리십시오.
- Align the hooks on the TV brackets with the top edge of the wall plate. Gently lower the TV, ensuring the brackets engage securely with the wall plate.
- Engage the safety locks (if present) on the bottom of the TV brackets to prevent accidental dislodgement.
Image: A person completing the final step of hanging the TV onto the wall mount, illustrating the quick installation process.
Image: Detail of the safety lock mechanism, which secures the TV brackets to the wall plate.
이미지: 클로즈업 view of the anti-drop design, ensuring the TV remains securely attached to the mount.
작동 지침
The PERLESMITH PSML1-E is a fixed TV wall mount. Once installed, the TV will remain in a static position, close to the wall (approximately 30 mm distance). This design provides a sleek, low-profile 모습.
Image: A television mounted on the wall, demonstrating the minimal 30mm distance from the wall for a low-profile 바라보다.
While the mount is fixed, some models may allow for a slight tilt adjustment up to 8 degrees. Refer to your specific product's features for tilt adjustment capabilities. To adjust, loosen the tilt bolts on the TV brackets, set the desired angle, and re-tighten the bolts securely.
유지
정기적인 유지 관리는 TV 벽걸이 마운트의 수명과 안전성을 보장합니다.
- 정기 검사: Annually check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- 청소: 부드럽고 마른 천으로 거치대를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 손상 확인: Inspect the mount for any signs of wear, corrosion, or damage. If damage is found, do not use the mount and contact customer support.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 설치 후 TV가 수평이 아닙니다. | 설치 중 벽판이 수평이 아닙니다. | Carefully remove the TV. Loosen the wall plate bolts, adjust with a level, and re-tighten. Re-hang the TV. |
| TV가 거치대에 맞지 않습니다. | VESA 패턴이 잘못되었거나 TV 크기/무게가 맞지 않습니다. | Verify TV specifications against the mount's compatibility (VESA, size, weight). Ensure correct screws and spacers are used. |
| 산이 불안정하게 느껴집니다. | Improper wall installation or loose fasteners. | Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure installation on a suitable wall type (solid concrete, brick, or wood stud). If unsure, consult a professional. |
| Cables are pinched or difficult to connect. | Insufficient space between TV and wall. | Ensure spacers are used if needed to provide adequate clearance for cables. Re-route cables carefully. |
명세서
- 모델: PSML1-E
- 상표: 허가
- 재료: 합금강
- 색상: 검은색
- 설치 유형: 벽걸이형
- 이동 유형: 결정된
- 호환 가능한 TV 크기: 26~75인치
- 최대 중량 용량: 52kg(114파운드)
- VESA 호환성: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
- 벽으로부터의 거리: 약 30mm
- 최대 기울기 각도: 8 Degrees (if applicable to specific unit)
- 품목 무게: 1.12 킬로그램
- 패키지 크기: 43.7 x 11.3 x 4.9cm
- 한국어: 713721601516
보증 및 지원
PERLESMITH products are designed for durability and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PERLESMITH web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.