소개
The Fluance RT81 Turntable is designed to deliver a pure analog listening experience with premium components. This manual provides detailed instructions for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity.
비디오 설명: 공식 제품 영상 쇼asing the Fluance RT81 Turntable's features and design. This video provides a general overview of the turntable's aesthetics and key components.
이미지 설명: The Fluance RT81 Turntable in Piano Black, showcasing its sleek design and the platter with the tonearm in position. This image highlights the overall appearance of the product.
무엇이 포함됩니까?
Please ensure all parts and accessories listed below are present in the packaging:
- RT81 턴테이블 유닛
- 더스트 커버
- 45 어댑터
- 고무 플래터 매트
- 3ft RCA Cable with Ground Wire
- 100V - 240V (50/60Hz) AC Power Adapter
- 빠른 시작 가이드
- Audio Technica AT95E Cartridge (pre-installed on headshell)
- 균형추
- 고무 벨트
- 힌지(x2)
이미지 설명: A visual diagram illustrating all components included with the Fluance RT81 Turntable, such as the plinth, aluminum platter, platter mat, headshell & AT95E cartridge, dust cover, hinges, RCA cable, 45 adapter, counterweight, power adapter, and rubber belt.
설정
1. 플래터 및 벨트 설치
- 접시를 스핀들 위에 올려놓으세요.
- Align the red ribbon with the motor pulley.
- Lift the ribbon and pull the rubber belt over the motor pulley.
- Once the belt is wrapped around the pulley, remove the ribbon.
- Rotate the platter to ensure the belt is not twisted.
- Install the turntable mat by placing it over the spindle.
2. Tonearm Balancing and Tracking Force Adjustment
Proper tonearm balance ensures maximum sound clarity and minimizes wear to your records and stylus.
- Install the counterweight onto the back of the tonearm with numbers facing forward until you hear a click.
- Attach the headshell to the tonearm and turn the locking nut until it firmly sits in place.
- 스타일러스 보호대를 제거하세요.
- Unlock the tonearm using the tonearm lock.
- Lift the cueing lever and position the tonearm over the platter.
- While holding the headshell, lower the cueing lever without letting the needle touch the platter.
- Turn the counterweight until the tonearm floats parallel to the mat. It should be as level as possible.
- Return the tonearm to the tonearm rest and lock it in place.
- Turn only the counterweight indicator ring to '0' on the center line. Do not turn the entire weight.
- Turn the entire counterweight counter-clockwise until the number '2' is on the center line. This sets the tracking force to 2 grams, which is optimal for this turntable.
- Locate the anti-skating dial next to the tonearm base and set it to '2'.
비디오 설명: This video provides a step-by-step guide on how to set up the tonearm for Fluance RT80 and RT81 turntables, including counterweight and anti-skating adjustments.
이미지 설명: 클로즈업 view of the Audio Technica AT95E cartridge with its green stylus tracking a record groove, emphasizing its precision and clarity.
3. 연결 Amp리시버 또는 리시버
The RT81 features a built-in pre-amplifier. Determine if your receiver has a dedicated phono input.
- If your receiver has a phono input: Connect the red and white RCA cables from the turntable's audio outputs to the corresponding left (white) and right (red) phono inputs on your receiver. Ensure the turntable's PHONO/LINE switch is set to 'PHONO'. Connect the ground wire from the turntable to the grounding nut on your receiver.
- If your receiver does NOT have a phono input: Connect the red and white RCA cables from the turntable's audio outputs to any available line-level input (e.g., CD, AUX, Tuner) on your receiver. Ensure the turntable's PHONO/LINE switch is set to 'LINE'. The ground cable is not required when using the internal pre-amp.
비디오 설명: This video demonstrates how to connect a Fluance Turntable to a stereo amplifier, covering both phono and line-level input connections.
이미지 설명: The rear panel of the Fluance RT81 Turntable, displaying the RCA audio outputs, ground terminal, PHONO/LINE switch, AUTO STOP switch, and DC power input.
이미지 설명: A close-up of the PHONO/LINE switch on the Fluance RT81 Turntable's rear panel, indicating the built-in Texas Instruments Preamp 기능성.
작동 지침
- 플래터에 레코드를 놓습니다.
- Select the appropriate speed (33 or 45 RPM) using the speed selector knob.
- 톤암을 거치대에서 분리하세요.
- Lift the cueing lever to raise the tonearm.
- Carefully position the tonearm over the desired starting groove of the record.
- 큐잉 레버를 아래로 내려 스타일러스를 레코드판 위로 부드럽게 떨어뜨리세요.
- At the end of the record, the auto-stop feature will halt the platter rotation if enabled. Manually lift the tonearm and return it to its rest.
- Lock the tonearm in place when not in use.
유지
턴테이블 청소
- Use a soft, dry cloth to clean the turntable plinth and dust cover. Avoid abrasive cleaners.
- For the stylus, use a soft brush designed for stylus cleaning, brushing gently from back to front.
- Keep records clean using an anti-static brush before each play to prevent dust buildup.
스타일러스 교체
The stylus should be replaced after approximately 300-500 hours of playback to maintain sound quality and prevent record damage. Refer to the Audio Technica AT95E documentation for specific replacement instructions.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않거나 볼륨이 작음 | Incorrect PHONO/LINE switch setting; loose RCA connections; amp앰프 입력이 선택되지 않았습니다. | Ensure PHONO/LINE switch is correct for your setup. Check all RCA connections. Select the correct input on your amp리시버/리시버. |
| 소리가 끊기거나 왜곡됨 | Incorrect tracking force; dirty stylus; damaged record; turntable not level. | Re-balance tonearm and adjust tracking force. Clean stylus. Inspect record for damage. Ensure turntable is on a stable, level surface. |
| 접시가 회전하지 않음 | Power not connected; belt dislodged or broken. | Check power adapter connection. Inspect and re-seat or replace the drive belt. |
| 윙윙거리는 소리 | Ground wire not connected (if using phono input); interference. | Connect the ground wire between turntable and receiver. Move turntable away from other electronic devices. |
명세서
- 제품 크기: 13.75 x 16.5 x 5.5 인치
- 품목 무게: 14.1파운드
- 모델 번호: RT81T
- 상표: 플루언스
- 최대 회전 속도: 45 RPM (supports 33 1/3 and 45 RPM)
- 재료: 엔지니어링 목재
- 색상: 피아노 블랙
- 탄약통: Audio Technica AT95E
- 사전amp: Built-in Texas Instruments Preamp
- 톤암 : Balanced Aluminum S-Type
이미지 설명: 클로즈업 view of the Fluance RT81 Turntable's solid engineered wood plinth in a walnut finish, highlighting the sound isolation feet for superior vibration control.
이미지 설명: A comparison chart detailing various models in the Fluance HiFi Turntable Line, including the RT81, showing differences in finish, cartridge, platter type, and built-in preamp 특징.
보증 및 지원
The Fluance RT81 Turntable comes with a 2년 제조사 보증. Fluance also offers 평생 고객 지원 모든 제품에 대해.
For further assistance, troubleshooting, or warranty claims, please visit the official Fluance web사이트 또는 고객 지원 팀에 문의하십시오.
You can also find more information and related products at the Fluance Store on Amazon.