소개
This manual provides essential information for the safe and efficient operation of your Renogy 2000W 12V Pure Sine Wave Power Inverter. This device converts 12V DC battery power into 230V AC household power, suitable for a wide range of electronic devices and appliances. Please read this manual thoroughly before installation and use, and retain it for future reference.
Image: The Renogy 2000W Pure Sine Wave Power Inverter, a black rectangular unit with blue accents, shown in a typical outdoor setting.
안전 지침
- 전기 안전: Always ensure proper grounding. Do not expose the inverter to water, rain, or excessive moisture. Operate in a well-ventilated area.
- 배터리 연결: Connect the inverter directly to a 12V deep cycle battery. Ensure correct polarity (positive to positive, negative to negative). Incorrect connections can damage the inverter and battery.
- 하중 용량: Do not exceed the inverter's continuous power rating of 2000W or peak power rating of 4000W. Overloading can cause damage and pose a fire hazard.
- 통풍: 인버터 주변의 공기 순환이 원활하도록 하여 과열을 방지하십시오. 통풍구를 막지 마십시오.
- 어린이와 애완동물: 인버터를 어린이와 반려동물의 손이 닿지 않는 곳에 보관하십시오.
- 유지: Disconnect all power before performing any maintenance or cleaning.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Renogy 2000W 12V 220V Pure Sine Wave Inverter x 1
- 20 mm² Cable x 1
- Remote Control (cable length: approximately 3m) x 1
Image: A close-up of a high-quality copper cable, indicating the type of accessory included for optimal performance.
제품 특징
- 강력한 DC-AC 변환: Provides 2000W continuous power (4000W peak) from 12V DC to 230V AC with 90% conversion efficiency.
- 순수 정현파 기술: Delivers stable, clean power comparable to grid electricity, protecting sensitive electronics and extending their lifespan.
- 종합 보호 시스템: Features LED indicators for under-voltag전자, 오버 볼륨tage, over-temperature, overload, and short-circuit protection. Includes a cooling fan and internal DC fuse for enhanced safety.
- Integrated Grid Priority Circuit: Ensures continuous 230V power by automatically switching between shore power and inverter power.
- 광범위한 적용 범위: Suitable for PCs, laptops, tablets, medical devices, and various household appliances.
- 사용자 친화적인 디자인: Equipped with 2 AC outlets and a remote control for convenient operation.
- 내구성 있는 구조: 견고한 금속 casing protects against impacts. High-speed fans maintain optimal operating temperature.
이미지: 앞면 view of the Renogy 2000W Inverter, highlighting the two AC outlets and the main power switch.
Image: The Renogy 2000W Inverter displaying icons for its six electronic protection features, including over-temperature, short circuit, and overload protection.
이미지: 후면 view of the inverter, showing the dual cooling fans designed for powerful heat dissipation and efficient system operation.
설정
설치 위치
Install the inverter in a dry, cool, and well-ventilated area. Avoid direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow.
배선도
Follow the diagram below for correct connection of the inverter to your solar power system. Ensure all connections are secure and properly insulated.
Image: A detailed wiring diagram illustrating the connections between solar panels, charge controller, battery, inverter, and various DC/AC loads in a solar power system.
배터리에 연결
- 인버터가 꺼져 있는지 확인하십시오.
- Connect the supplied 20 mm² cable to the DC input terminals on the rear of the inverter. Ensure positive (+) is connected to positive and negative (-) to negative.
- Connect the other end of the cables to your 12V deep cycle battery. Use appropriate fuses or circuit breakers as recommended for your system.
- 접촉 불량 및 아크 발생을 방지하기 위해 모든 연결부를 단단히 조이십시오.
AC 부하 연결
Plug your AC appliances directly into the 230V AC outlets on the front of the inverter. Ensure the total power consumption of your appliances does not exceed 2000W.
작동 지침
전원 켜기/끄기
- Ensure all DC and AC connections are correctly made.
- Press the main power switch on the front of the inverter to the 'ON' position. The indicator lights will illuminate.
- To power off, switch the main power switch to the 'OFF' position.
리모컨 사용
The included remote control allows you to power the inverter on or off from a distance, which is convenient when the inverter is installed in an inaccessible location.
Image: The remote control unit for the Renogy inverter, featuring an on/off switch and indicator lights, mounted on a wooden surface.
- Connect the remote control cable to the designated port on the inverter.
- Use the switch on the remote control to turn the inverter ON or OFF.
표시등
The inverter features LED indicators that provide status information and alert you to potential issues:
- 녹색 LED : 정상적인 작동을 나타냅니다.
- 적색 LED : Indicates a fault or protection mode (e.g., overload, over-temperature, low voltage). Refer to the Troubleshooting section for details.
유지
- 청소: 인버터 외부를 주기적으로 마른 천으로 닦아주십시오. 통풍구에 먼지와 이물질이 없도록 하십시오. 액체 세척제는 사용하지 마십시오.
- 연결 확인: Regularly inspect all DC and AC connections for tightness and corrosion. Tighten any loose connections.
- 배터리 상태: Ensure your battery is well-maintained and charged to prolong its lifespan and the inverter's performance.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 인버터가 켜지지 않습니다 | Loose battery connection; Low battery voltage; Blown fuse | Check battery connections; Charge battery; Replace fuse (if applicable and safe to do so) |
| AC 출력 없음 | 과부하; 과열; 낮은/높은 입력량tage | 부하를 줄이십시오. 인버터가 식을 때까지 기다리십시오. 배터리 용량을 확인하십시오.tage |
| Red LED indicator is on | Overload; Over-temperature; Input voltage out of range; Short circuit | Identify and resolve the specific fault condition. Disconnect loads, check connections, allow cooling. |
| 팬이 작동하지 않음 | Normal operation (fan activates under load/temperature); Fan malfunction | Ensure inverter is under load or operating at higher temperatures. If no fan operation under load, contact support. |
명세서
| 사양 | 값 |
|---|---|
| 상표 | 레노지 |
| 모델명 | R-INVT-PUH1-201235-DE/EU |
| 전원(연속) | 2000 와트 |
| 최대 출력 전력 | 4000 와트 |
| 입력 Voltage | 12볼트(DC) |
| 출력 볼륨tage | 230볼트(AC) |
| 출력파형 | 순수한 사인 웨이브 |
| 빈도 | 50Hz |
| 총 전원 콘센트 | 2 |
| 치수(길이 x 너비 x 높이) | 48.2L x 22W x 9.2Hcm |
| 품목 무게 | 4.8 킬로그램 |
| 추천 용도 | Powering sensitive electronics during camping or outdoor activities, medical devices, household appliances during travel or off-grid living. |
| 인증 | ETL, CE, UKCA, RoHS, ECE R10 |
보증 및 지원
The Renogy 2000W 12V Pure Sine Wave Power Inverter comes with a 2년 보증 covering materials and manufacturing defects.
For technical support, warranty claims, or any product-related inquiries, please contact Renogy customer service directly. If you encounter any issues, especially transport-related damage, please reach out via buyer message for assistance with replacement or partial refund options.
Please visit the official Renogy web웹사이트를 방문하시거나 구매 서류를 참조하여 최신 연락처 정보를 확인하십시오.