LaMotte 2020t 탁도계 사용 설명서

1. 서론

This manual provides detailed instructions for the proper setup, operation, and maintenance of the LaMotte 2020t Turbidity Meter. Adhering to these guidelines will ensure accurate measurements and extend the lifespan of your instrument. Please read this manual thoroughly before using the device.

2. 제품 오버view 및 기능

The LaMotte 2020t Turbidity Meter is designed for precise turbidity measurements in various applications, including natural waters, mid-range industrial processes, and high-range environmental analysis. It is an advanced replacement for the 1970-ISO model.

Figure 2.1: The LaMotte 2020t Turbidity Meter handheld device, displaying a digital reading and control buttons.

주요 특징:

• 2020t Version: Optimized for natural waters, mid-range industrial applications, and high-range environmental applications.
• ISO 7027 Compliance: Meets design criteria for quantitative methods of turbidity using optical turbid meters as specified by ISO 7027, making it suitable for colored or extremely turbid samp레.
• USB 포트: Equipped with a USB port for data transfer and connectivity.
• 교체 모델: Serves as a direct replacement for the 1970-ISO model.

상자 안에 무엇이 들어있나요?

Figure 2.2: The complete LaMotte 2020t Turbidity Meter Kit, including the meter, carrying case, sample cells, and calibration standards.

The LaMotte 2020t Turbidity Meter KIT typically includes:

• LaMotte 2020t Turbidity Meter
• 운반 케이스
• Sample Cells
• Calibration Standards (e.g., 0.02 NTU, 1.0 NTU, 10.0 NTU)
• USB 케이블
• 전원 어댑터
• 사용 설명서

3. 안전 지침

부상 및 기기 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.

• Always handle the meter and reagents with care.
• Do not immerse the meter in water or other liquids.
• Use only the specified power adapter and USB cable.
• Avoid dropping or subjecting the meter to severe impact.
• 기기를 강한 자기장이나 극한 온도에 노출시키지 마십시오.
• 밀폐된 공간에서 작업할 때는 적절한 환기를 확보하십시오.
• Dispose of reagents and samples according to local regulations.

4. 초기 설정

4.1 풀기 및 검사

1. 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. "구성품" 항목에 나열된 모든 품목이 있는지 확인하십시오.
3. Inspect the meter and accessories for any visible damage. If damage is found, contact LaMotte customer support immediately.

4.2 미터 전원 켜기

The 2020t Turbidity Meter can be powered via its internal rechargeable battery or directly through the provided power adapter.

• 배터리 충전: Connect the power adapter to the meter's charging port and plug it into a standard electrical outlet. The battery indicator on the display will show charging status.
• 초기 청구 : 처음 사용하기 전에 배터리를 완전히 충전하는 것이 좋습니다.

4.3 교정

Regular calibration ensures the accuracy of your turbidity measurements. Use the provided calibration standards.

1. 미터를 켜려면 버튼을 누르십시오. 힘 단추.
2. Access the calibration menu (refer to the on-screen prompts or specific section in the full manual for navigation).
3. Insert the lowest NTU standard (e.g., 0.02 NTU) into the sample compartment, ensuring the cell is clean and free of air bubbles.
4. Follow the on-screen instructions to perform the calibration for each standard, progressing from lowest to highest NTU value.
5. Confirm calibration completion.

5. 사용 설명서

5.1 Taking a Turbidity Measurement

1. 준비 Samp르 셀: s를 확인하십시오ample cell is clean, dry, and free of scratches. Fill the cell with the sample to be tested, avoiding air bubbles.
2. S 삽입amp르 셀: 준비된 s를 놓으세요ample cell into the meter's sample compartment, aligning any marks as indicated by the instrument.
3. 측정 모드 선택: If applicable, select the desired measurement mode (e.g., single reading, average) using the navigation buttons.
4. 측정 시작: 를 누르세요 입력하다 or 스캔 SAMPLE 측정을 시작하려면 버튼을 클릭하세요.
5. 결과 읽기: The turbidity reading in NTU (Nephelometric Turbidity Units) will be displayed on the screen.
6. 기록 데이터: Manually record the reading or utilize the data logging features if available.

5.2 USB 포트 사용

The integrated USB port allows for data transfer to a computer or for firmware updates.

• Connect the meter to a computer using the provided USB cable.
• The meter may appear as a removable storage device or require specific software (refer to LaMotte's web(소프트웨어 다운로드 사이트)
• Follow the software instructions to download stored data or update firmware.

6. 유지관리

6.1 Cleaning the Meter and Sample Cells

• Meter Exterior: 계량기 외부를 부드러운 천으로 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• Sample Cells: 클린ample cells thoroughly after each use. Rinse with distilled or deionized water and dry with a lint-free cloth. Avoid scratching the cell surfaces, as this can affect readings.
• Sample Compartment: s를 유지하세요ample compartment clean and free of dust or spills. Use a soft brush or compressed air if necessary.

6.2 보관

When not in use, store the LaMotte 2020t Turbidity Meter in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged if storing for extended periods.

7. 문제 해결

If you encounter problems not listed here, or if solutions do not resolve the issue, please contact LaMotte customer support.

8. 기술 사양

• 모델 번호: 2020톤
• 측정 원리: Nephelometric (ISO 7027 compliant)
• 빛의 출처: 텅스텐 lamp
• 인터페이스: USB 포트
• 힘: Internal rechargeable battery, AC adapter
• 치수(대략): Refer to product packaging for exact dimensions (e.g., 17.32 x 12.72 x 4.76 inches)
• 무게 (근사치) : Refer to product packaging for exact weight (e.g., 1 Pound)
• 제조업체: 라모트
• 첫 번째 이용 가능: 14년 2019월 XNUMX일

9. 보증 및 고객 지원

LaMotte products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official LaMotte website. For technical assistance, replacement parts, or service inquiries, please contact LaMotte customer support directly.

You can find more information about LaMotte products and support on their official Amazon store page: LaMotte Amazon Store.