Transformers Generations Selects WFC-GS01 Combat Megatron Action Figure Instruction Manual

소개

This manual provides essential instructions for the assembly, operation, and care of your Transformers Generations Selects WFC-GS01 Combat Megatron Voyager Class action figure. Designed for collectors and enthusiasts, this figure transforms between a robot mode and a tank mode, offering dynamic display and play options.

안전 정보

경고: 질식 위험 - 작은 부품이 포함되어 있습니다. 3세 미만 어린이에게는 사용하지 마십시오.

This product contains small components that may pose a choking hazard. Adult supervision is recommended for younger users. Keep all packaging materials away from children.

상자 안에 무엇이 들어있나요?

• Voyager Class Decepticon Combat Megatron figure
• 2 weapon accessories
• 사용 설명서(이 설명서)

설정

1. 언박싱: 피규어와 모든 부속품을 포장에서 조심스럽게 꺼내세요. 나중에 보관할 필요가 있을 경우 포장을 보관해 두세요.
2. 액세서리 부착: The Combat Megatron figure comes with two weapon accessories. These can be attached to the figure's hands or various 5mm ports in robot mode, or integrated into the tank mode as specified in the transformation steps.

Image: Combat Megatron in robot mode, holding its weapon accessories. The figure features a white, green, and black color scheme with camouflage patterns.

작동 지침: 변환

The Combat Megatron figure can be transformed between its robot mode and tank mode. Follow these steps carefully to avoid damage.

Transforming from Robot Mode to Tank Mode

1. Remove Weapons: Detach all weapon accessories from the figure. Set them aside for later integration into tank mode.
2. 포지션 암즈: Rotate the robot's arms at the shoulders so they point forward. Fold the hands into the forearms if applicable.
3. Fold Torso: Collapse the robot's chest and head section downwards or backwards, depending on the specific mechanism, to begin forming the tank's main body.
4. Leg Conversion: Straighten the robot's legs. Rotate the waist and hip joints to bring the legs together. Fold the feet to form the front or rear of the tank.
5. Form Tank Tracks/Chassis: Manipulate the leg panels and other body sections to form the tank's treads and chassis. Ensure all panels align and snap into place securely.
6. Attach Turret/Weapons: Reattach the main weapon accessory to form the tank's turret or main cannon. Other accessories can be mounted on designated ports on the tank's surface.
7. 최종 정렬: Ensure all parts are securely tabbed and aligned to form a cohesive tank mode.

Transforming from Tank Mode to Robot Mode

1. Remove Weapons: Detach all weapon accessories from the tank mode.
2. Separate Chassis: Carefully untab and unfold the tank's chassis and tread sections to begin separating the robot's limbs.
3. 다리 뻗기: Extend and straighten the robot's legs from the tank's rear or underside. Rotate the feet into position.
4. Unfold Torso: Unfold the main body section to reveal the robot's chest and head. Ensure the head is fully extended and locked into place.
5. 포지션 암즈: Extend the robot's arms from the sides of the tank. Rotate them into their proper shoulder positions and extend the hands.
6. 무기를 장착하세요: Place the weapon accessories into the robot's hands or attach them to designated ports.
7. 최종 포즈: Adjust joints and panels for desired robot pose.

Image: Combat Megatron in its alternate tank mode, with the main weapon forming the tank's cannon. The camouflage pattern is visible across the vehicle form.

유지

• 청소: Use a soft, dry cloth to gently wipe dust from the figure. Avoid harsh chemicals or abrasive cleaners, as these can damage the paint or plastic.
• 저장: 변색이나 소재의 변형을 방지하기 위해 직사광선을 피해 시원하고 건조한 곳에 보관하세요.
• 관절 관리: If joints become stiff, gently work them back and forth. Do not force movement, as this can cause breakage.

문제 해결

Difficulty with Transformation

If you encounter difficulty transforming the figure, particularly with parts not aligning or snapping into place:

• Review 지침: Carefully re-read the transformation steps, paying close attention to the order and direction of movement.
• 온화한 힘: Apply gentle, even pressure. Avoid excessive force, which can break plastic tabs or hinges.
• 정렬 확인: Ensure all tabs and slots are perfectly aligned before attempting to push parts together. Sometimes a slight adjustment in angle is needed.
• 장애물 제거: Verify that no small parts or accessories are obstructing the transformation path.

명세서

보증 및 지원

제품 보증 또는 고객 지원에 관한 정보는 제조사 공식 웹사이트를 참조하십시오. web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.