1. 서론
This manual provides essential information for the safe and efficient use of your Wathai 120x120x25mm 24V 2Pin 2000RPM DC Brushless Motor Case Fan. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. 안전 정보
- 전원 공급 장치가 팬의 정격 볼륨과 일치하는지 확인하십시오.tage (24V DC). Connecting to an incorrect voltage may damage the fan or power source.
- Disconnect power before installation, cleaning, or maintenance to prevent electrical shock.
- 선풍기가 작동하는 동안 선풍기 날개를 만지지 마십시오.
- 선풍기를 물이나 과도한 습기로부터 멀리 두십시오.
- Do not obstruct the fan's airflow, as this can lead to overheating and reduced performance.
- Install the fan in a well-ventilated area.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x Wathai 120x120x25mm 24V 2Pin 2000RPM Case Fan
- 1 x Fan Grill
- 4 x Mounting Screws and Nuts
Image: The Wathai 120mm fan shown with its accessories, including a fan grill and mounting hardware.
4. 사양
The following table details the technical specifications of the Wathai 120x120x25mm 24V 2Pin 2000RPM Case Fan:
Image: Detailed specifications table for the fan, including dimensions, electrical ratings, and performance metrics. A diagram illustrates the fan's physical dimensions and the 2-pin connector wiring (Black for negative, Red for positive).
| 특징 | 사양 |
|---|---|
| 크기 | 120x120x25mm (길이 4.71인치 x 너비 4.72인치 x 높이 1인치) |
| 정격 볼륨tage | 24V 직류 |
| 전원 커넥터 유형 | 2-Pin (XH2.54) |
| 속도 | 2000 RPM (Max 2100 RPM) |
| 공기 흐름 용량 | 74 퀴놀론 |
| 소음 수준 | 26데시벨 |
| 베어링 유형 | 슬리브 베어링 |
| 수명 | 최대 35,000시간 |
| 케이블 길이 | 30cm(12인치) |
| 재료 | 플라스틱 |
| 품목 무게 | 4.4 온스 |
5. 설정 및 설치
Follow these steps to properly install your Wathai case fan:
- 장착 위치 준비: Identify the desired location for the fan. Ensure there is sufficient space and proper airflow.
- Attach the Fan Grill (Optional): If using the included fan grill for protection, align it with the fan's mounting holes and secure it using the provided screws and nuts.
- 팬 장착: Position the fan in the desired location. Use the provided mounting screws and nuts to secure the fan firmly. Ensure the fan is oriented correctly for desired airflow direction (intake or exhaust).
- 전원 연결: Connect the fan's 2-pin XH2.54 connector to a compatible 24V DC power source. Ensure correct polarity: the red wire is positive (+), and the black wire is negative (-).
이미지: 클로즈업 view of the fan's 2-pin XH2.54 connector, highlighting the red and black wires for power connection.
Video: A short demonstration of the Wathai 120mm fan in operation, showcasing its basic function and potential for DIY cooling applications.
6. 사용 설명서
Once installed and connected to a 24V DC power source, the fan will begin to operate, providing airflow for cooling. The fan is designed for continuous operation.
- 전원 켜기/끄기: The fan's operation is controlled by the power supply it is connected to. Turn the power supply on or off to start or stop the fan.
- 공기 흐름 방향: The fan typically has an arrow indicating the direction of airflow on its side. Ensure it is oriented to provide cooling to the desired area or to exhaust hot air.
Image: Various application scenarios for the Wathai 120mm fan, such as cooling PC components, inverters, and other electronic enclosures.
Video: A brief video illustrating the Wathai 120mm fan's use in a DIY cooling project, demonstrating its versatility.
7. 유지관리
정기적인 유지관리를 통해 최적의 성능을 보장하고 팬의 수명을 연장할 수 있습니다.
- 청소: Periodically clean the fan blades and housing to remove dust and debris. Use a soft brush or compressed air. Ensure the fan is disconnected from power before cleaning.
- 점검: Check for any signs of wear or damage to the fan blades or power cable. If any damage is found, discontinue use and replace the fan.
- 매끄럽게 하기: This fan uses a sleeve bearing, which is generally maintenance-free. Do not attempt to lubricate the bearing unless specifically instructed by a qualified technician.
8. 문제 해결
If you encounter issues with your Wathai case fan, refer to the following troubleshooting guide:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 회전하지 않음 | No power, incorrect wiring, faulty fan. | Check power connection and source. Verify correct polarity (Red to +, Black to -). If issues persist, the fan may be faulty. |
| 팬이 시끄럽습니다 | Dust accumulation, obstructed blades, loose mounting. | Clean fan blades. Ensure no cables or objects are hitting the blades. Tighten mounting screws. |
| 낮은 기류 | Obstruction, incorrect orientation. | Remove any obstructions. Ensure fan is oriented for optimal airflow (check arrow on side). |
9. 보증
The Wathai 120x120x25mm 24V 2Pin 2000RPM Case Fan comes with a 1년 보증 from the date of purchase. This warranty covers manufacturing defects. It does not cover damage resulting from improper installation, misuse, unauthorized modifications, or normal wear and tear. For warranty claims, please contact customer support with your proof of purchase.
Returns are accepted within 30 days of purchase for refund or replacement, subject to the seller's return policy.
10. 지원
For further assistance, technical support, or inquiries regarding your Wathai product, please visit the official Wathai store or contact their customer service.
Wathai Store: Visit the Wathai Store on Amazon