1. 소개 및 제품 끝view
Thank you for choosing the Stayer Professional Telescopic Miter Saw SCR 315 W. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and keep it for future reference.
This powerful 1800W miter saw is designed for precision cutting with a large capacity, capable of cutting materials up to 370 mm in length and 120 mm in height. Its belt-driven transmission significantly reduces noise and improves work quality. The robust yet lightweight aluminum base ensures stability and durability.
이미지 1.1: 이상view of the Stayer Professional Telescopic Miter Saw SCR 315 W.
2. 안전 지침
화재, 감전, 부상의 위험을 줄이기 위해 항상 기본적인 안전 수칙을 준수하십시오. 본 설명서를 항상 가까이에 두어 언제든 참고할 수 있도록 하십시오.
일반 안전 규칙:
- 안전 안경, 청력 보호 장비, 방진 마스크 등 적절한 개인 보호 장비(PPE)를 항상 착용하세요.
- 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.
- 톱을 작동하는 동안 어린이와 구경꾼이 접근하지 못하게 하십시오.
- 가연성 액체, 가스, 먼지 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마세요.
- Secure the workpiece firmly before cutting. Never hold small pieces by hand.
- 칼날 보호대가 항상 제자리에 있고 제대로 작동하는지 확인하십시오.
- 조정, 액세서리 교체 또는 유지 보수를 하기 전에 톱의 전원을 차단하십시오.
- Use only sharp, clean blades of the correct size and type for the material being cut.
- Avoid awkward hand positions. Always maintain proper footing and balance.
3. 구성 요소 및 주요 특징
Familiarize yourself with the various parts of your miter saw to ensure safe and effective operation.
Image 3.1: Labeled diagram of the miter saw components.
- 운송 손잡이: For safe and easy carrying of the saw.
- Belt Motor: 1800W motor with belt transmission for quiet and efficient operation.
- Telescopic Rail: Allows for extended cutting capacity up to 370mm.
- 수직 Clamp: 안정적인 절삭을 위해 공작물을 고정합니다.
- 고개를 기울이다: Adjustable from -45° to +45° for bevel cuts in both directions.
- Extendable Support: Provides additional support for longer workpieces.
- Adjustable Rotary Table: Allows for precise miter angle adjustments (0°/22.5°/45°).
- 고무 발: Ensures stability and reduces vibration during operation.
- 레이저 가이드: Provides a precise cutting line for improved accuracy.
Image 3.2: Additional features and technical data overview.
4. 설정
Although the saw comes largely pre-assembled, some setup is required before first use.
포장 풀기 및 배치:
- 톱과 모든 부속품을 포장에서 조심스럽게 꺼내세요.
- Inspect the saw for any shipping damage. Do not operate if damaged.
- Place the saw on a stable, level workbench or stand that can support its weight (approx. 19 kg) and the workpiece. Ensure sufficient space around the saw for safe operation and material handling.
- Ensure the rubber feet are securely positioned to prevent movement.
초기 조정:
- Verify that all locking mechanisms for the miter table, bevel head, and telescopic rail are functioning correctly.
- Check the alignment of the blade with the miter scale and laser guide. Adjust if necessary according to the calibration section (if applicable in a detailed manual).
- Connect the saw to a suitable power outlet (220V AC).
이미지 4.1: View of the miter table and fence, ready for setup.
5. 사용 설명서
마이터 톱을 안전하고 효율적으로 사용하려면 다음 단계를 따르십시오.
Basic Cutting Procedure:
- 작업물 준비: 재료에 원하는 절단선을 표시하세요.
- 설정 조정: Set the desired miter angle on the rotary table and the bevel angle on the tilting head. Secure all locking levers.
- 작업물 위치: Place the workpiece firmly against the fence and the saw table. Use the vertical clamp to secure it. Ensure the material is fully supported, using the extendable supports if needed.
- 정렬 절단: Lower the saw head slightly (without starting the motor) to align the blade with your marked cut line. Use the laser guide for precise alignment.
- 톱 시작: Ensure your hands are clear of the blade path. Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- 컷 만들기: Slowly and steadily lower the saw head through the workpiece. For telescopic cuts, push the saw head forward along the rail as you cut.
- 완전한 컷: 절단이 완료되면 전원 스위치를 놓고 톱날이 완전히 멈출 때까지 기다린 후 톱 헤드를 들어 올리십시오.
- 작업물 제거: Carefully remove the cut material and any off-cuts.
Image 5.1: The miter saw in action, demonstrating a cut.
이미지 5.2: 클로즈업 view of the cutting process, showing the laser guide.
6. 유지관리
정기적인 유지관리는 마이터 톱의 수명과 최적의 성능을 보장합니다.
청소:
- After each use, disconnect the saw from power and clean off sawdust and debris using a brush or vacuum cleaner.
- Pay special attention to the blade guard, miter scale, and telescopic rails to ensure smooth operation.
- The dust collection system is designed to minimize sawdust, but regular cleaning of the dust bag/port is essential.
칼날 관리 및 교체:
- Regularly inspect the saw blade for sharpness, cracks, or missing teeth. A dull blade can cause kickback and poor cut quality.
- When replacing the blade, ensure the saw is unplugged. Follow the instructions in your saw's specific blade replacement guide. Use only blades with a 315mm diameter and appropriate arbor size.
벨트 검사:
- Periodically inspect the drive belt for wear, cracks, or slippage. A worn belt can affect performance and increase noise.
- Refer to the service manual for instructions on belt replacement if necessary.
Image 6.1: Close-up of the blade and guard, important for maintenance checks.
7. 문제 해결
이 섹션에서는 마이터 톱 사용 시 발생할 수 있는 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 톱이 시작되지 않음 | 전원 없음, 스위치 고장, 모터 문제 | Check power connection, circuit breaker. If problem persists, contact service. |
| 절단 품질 불량 (거칠고, 갈라짐) | Dull blade, incorrect blade for material, improper feed rate, workpiece not secure | Replace or sharpen blade. Use appropriate blade. Adjust feed rate. Secure workpiece firmly. |
| 과도한 진동이나 소음 | Loose blade, worn belt, damaged bearings, unstable setup | Check blade tightness. Inspect belt for wear. Ensure saw is on a stable surface. If severe, seek professional service. |
| Laser guide not accurate | Misalignment, dirty laser lens | Clean laser lens. Refer to specific instructions for laser calibration (if available). |
| 집진 효과가 없음 | Dust bag full, clogged port, improper connection | Empty dust bag. Clear any clogs in the dust port. Ensure connections are secure. |
| Play/wobble in saw head or table | Loose components, manufacturing defect | Check for any accessible tightening points. If significant play affects accuracy or safety, contact customer support. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Stayer customer support.
8. 기술 사양
Detailed specifications for the Stayer Professional Telescopic Miter Saw SCR 315 W.
| 사양 | 값 |
|---|---|
| 모델 번호 | 1.1933 |
| 제조업체 | 체류자 |
| 전원 | 코드식 전기 |
| 권tage | 220볼트(AC) |
| 힘 | 1800 와트 |
| 속도 | 3500 RPM |
| 블레이드 소재 | Aluminum Oxide (typical for general purpose blades) |
| 특징 | Silent (Belt Drive) |
| 품목 무게 | 19 킬로그램 |
| 패키지 크기 | 95 x 55 x 55cm |
| Cutting Capacity (Length) | 최대 370mm |
| 절단능력(높이) | 최대 120mm |
9. 보증 및 지원
보증 정보는 구매 시 동봉된 보증 카드 또는 관련 서류를 참조하십시오. 보증 조건은 지역 및 판매점에 따라 다를 수 있습니다.
If you require technical assistance, spare parts, or have questions regarding the operation or maintenance of your Stayer Professional Telescopic Miter Saw, please contact Stayer customer support or your authorized dealer. Have your model number (1.1933) and purchase details ready when contacting support.