소개
This manual provides detailed instructions for the assembly, installation, and maintenance of your Schellenberg Basic Window Mosquito Screen, model 70988. This kit is designed to protect your home from insects while allowing fresh air circulation. It features a high-quality fiberglass fabric and a robust aluminum frame, suitable for various window types, including those with roller shutters.
안전 지침
- 조립이나 설치를 시작하기 전에 항상 모든 지침을 읽고 이해하세요.
- Use appropriate safety gear, such as gloves, when handling tools and materials.
- 어린이의 질식 위험을 방지하기 위해 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하십시오.
- 작업 공간이 깨끗하고 조명이 밝은지 확인합니다.
- 본 설명서에 설명되지 않은 방법으로 제품을 개조하지 마십시오.
패키지 내용
아래 나열된 모든 구성품이 패키지에 들어 있는지 확인하세요.
- 4 x Aluminum profiles for the clamp잉 프레임
- 1 x Fiberglass mosquito net fabric
- 4 x Corner connectors
- 4 x Corner connection caps
- 4 x Stainless steel suspension springs
- 2 x Piping handles
- 4 x Piping beads
- 1 x Brush seal
- 1 x 조립 지침
설정 및 조립
Follow these steps to assemble and install your window mosquito screen:
- 전문가를 준비하세요files: 알루미늄 전문가를 연결하세요files using the corner connectors to form the frame. Ensure they are securely fitted.
- Install the Mesh: Lay the fiberglass mosquito net fabric over the assembled frame. Using the piping beads and a suitable tool (not included, typically a spline roller), press the fabric into the groove of the aluminum profiles. Trim any excess fabric.
- Attach Handles and Springs: Secure the two piping handles to the frame. Insert the stainless steel suspension springs into the designated slots on the frame.
- Apply Brush Seal: Integrate the brush seal into the frame. This seal helps to close any gaps between the mosquito screen and your window frame, providing enhanced protection against insects.
- Installation on Window: The assembled mosquito screen is designed to be hung onto the window frame using the integrated suspension springs. No drilling into your window frame is required. The slim profile (9 mm total installation depth) allows for installation even behind existing roller shutters.
작동 지침
Once installed, the mosquito screen provides continuous insect protection. To open or close your window, simply unhook the screen from the window frame using the handles and set it aside. Re-attach it when the window is in the desired position. For seasonal use, the screen can be easily removed and stored.
유지
- 메시 청소: The fiberglass mesh can be cleaned with a soft brush or a damp cloth and mild soapy water. Rinse thoroughly with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
- 프레임 청소: 알루미늄 프레임을 광고로 닦으세요amp 옷감.
- 저장: For prolonged periods of non-use (e.g., winter), remove the screen from the window and store it in a dry, protected area to extend its lifespan.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Screen does not fit window opening. | Incorrect measurements or assembly. | Re-measure window opening and ensure profiles are cut to correct length during assembly. Check all corner connections. |
| Gaps between screen and window frame. | Brush seal not properly installed or damaged. | Ensure the brush seal is fully seated in its groove. Replace if damaged. |
| Mesh is loose or sagging. | Piping bead not fully inserted or has come loose. | Re-insert the piping bead firmly into the profile groove using a spline roller. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 제조업체 | Schellenberg |
| 모델 번호 | 70988 |
| 제품 크기(L x W x H) | 120 x 0.8 x 140cm |
| 무게 | 1.38킬로그램 |
| 크기 | 120 x 140cm |
| 색상 | 하얀색 |
| 찬성file 두께 | 23 x 8mm |
| 재료 | Aluminum, Fiberglass |
| 용법 | 집 밖의 |
| 필요한 배터리 | 아니요 |
| 원산지 | 중국 |
보증 및 지원
For warranty information, product support, or to inquire about replacement parts, please refer to the official Schellenberg web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
연락처 정보:
- 제조업체: Schellenberg
- Web대지: www.schellenberg.de (Please check for local country-specific web사이트)