Pic Solution ClassicStethoMED Single Aneroid Blood Pressure Monitor with Stethoscope User Manual

소개

This manual provides essential instructions for the safe and effective use of the Pic Solution ClassicStethoMED Single Aneroid Blood Pressure Monitor with Stethoscope. Please read this manual thoroughly before first use and keep it for future reference.

The Pic Solution ClassicStethoMED is a mechanical aneroid blood pressure monitor designed for professional and home use. It includes a clear, highly readable manometer, a comfortable cuff with a pull-ring and Velcro for easy fitting, and a stethoscope for auscultation during arterial blood pressure measurement. A fabric case is provided for convenient transport and organized storage of all components.

중요한 안전 정보

Always consult a healthcare professional for diagnosis and treatment of high blood pressure. Self-measurement is for monitoring purposes only and does not replace medical consultation.

• Do not use this device on infants or individuals unable to communicate.
• Do not use this device in an environment where high-frequency surgical equipment or magnetic resonance imaging (MRI) equipment is present.
• 강력한 전자기장을 피하세요.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 장치를 분해하거나 개조하지 마세요.
• Ensure the cuff size is appropriate for the user's arm circumference.

상자 안에 무엇이 들어있나요?

패키지에는 다음 구성 요소가 포함되어 있습니다.

• Aneroid Blood Pressure Monitor (Manometer and Inflation Bulb)
• 팔목
• 청진기
• 보관 가방
• 사용 설명서

Image: This image displays all the components included with the Pic Solution ClassicStethoMED blood pressure monitor: the aneroid gauge, inflation bulb, arm cuff, stethoscope, and a blue fabric storage bag.

설정 및 조립

1. 커프를 연결하세요: 커프에서 나온 공기 튜브가 압력계에 단단히 연결되어 있는지 확인하십시오.
   

   이미지: 자세한 view of the aneroid manometer connected to the blue arm cuff and the black inflation bulb, illustrating the main measurement unit.

2. Stethoscope Assembly: The stethoscope is typically pre-assembled. Ensure the earpieces are clean and the diaphragm is intact.
   

   Image: This image provides a close-up of the stethoscope's chest piece (diaphragm) and part of its tubing, highlighting its design for auscultation.

작동 지침

측정 준비

• Rest for at least 5 minutes before measurement.
• 경기 30분 전에는 음식물 섭취, 카페인 음료 마시기, 흡연, 운동을 삼가해 주십시오.
• 등을 받치고 발이 바닥에 편평한 편안한 자세로 앉으십시오.
• 팔을 평평한 곳에 놓고 커프가 심장 높이에 오도록 하세요.

커프 적용

1. Slide the cuff onto your bare upper arm, ensuring the lower edge is about 2-3 cm above the elbow joint.
   

   Image: A person demonstrating the correct placement of the blood pressure cuff on the upper arm, positioned just above the elbow for accurate measurement.
2. Tighten the cuff using the Velcro closure, ensuring it is snug but not overly tight. You should be able to insert two fingers comfortably under the cuff.
3. Position the manometer so it is easily visible.

측정하기

1. Place the stethoscope diaphragm over the brachial artery in the crook of your elbow.
2. 공기 주입구의 공기 배출 밸브를 시계 방향으로 돌려 닫으십시오.
3. Rapidly inflate the cuff by squeezing the bulb until the manometer reads about 20-30 mmHg above your usual systolic pressure, or until the pulse sound disappears.
4. Slowly open the air release valve (counter-clockwise) to deflate the cuff at a rate of 2-3 mmHg per second.
5. Listen carefully through the stethoscope for the first faint, tapping sound (Korotkoff sound). This is your 수축기 혈압. Note the reading on the manometer.
6. Continue deflating the cuff. The sounds will become louder, then muffled, and finally disappear. The point at which the sounds completely disappear is your 이완기 압력. Note this reading.
7. Once the sounds have disappeared, quickly deflate the cuff completely.
8. Record your measurements.

관리 및 유지 보수

• 청소: Wipe the manometer, inflation bulb, and stethoscope with a soft, damp cloth. Use a mild disinfectant if necessary. Do not immerse any part of the device in water.
• Cuff Cleaning: The cuff can be gently hand-washed with mild soap and water. Allow it to air dry completely before storage.
• 저장: Store the device in its provided fabric case in a cool, dry place, away from direct sunlight and extreme temperatures.
• 구경 측정: Aneroid blood pressure monitors should be checked for accuracy and calibrated periodically, typically every 1-2 years, by a qualified technician.

Image: The blue fabric storage case with the Pic Solution logo, designed to hold and protect all components of the blood pressure monitor for transport and storage.

문제 해결

명세서

• 모델 이름: Pic Solution ClassicStethoMED
• 모델 번호: 02021402000000
• 유형: Aneroid Blood Pressure Monitor with Stethoscope
• 디스플레이 유형: 비슷한 물건
• 제품 크기: 18.8 x 7.87 x 11.18cm
• 품목 무게: 360그램
• 포함된 구성 요소: Aneroid monitor, flat stethoscope, transport bag, manual
• 대상 연령 범위: 성인
• 원산지: 이탈리아

보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or visit the official Pic Solution web대지.

This device is a CE Medical Device (0068). Please read the warnings and instructions for use carefully.

Manufacturer: Pikdare S.p.A.