코레디 R300 로봇 청소기 사용 설명서

소개

The Coredy R300 Robot Vacuum Cleaner is designed to provide efficient and automated cleaning for your home. With 1700Pa of powerful suction, it effectively picks up dirt, dust, hair, pet fur, and debris from various floor types, including hardwood floors and medium-pile carpets. Its ultra-slim design allows it to navigate under furniture, ensuring a thorough clean. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your R300 robot vacuum cleaner.

무엇이 포함됩니까?

Upon unboxing your Coredy R300 Robot Vacuum Cleaner, please ensure all components are present:

• R300 robot vacuum (Dust bin included) x1
• Upgraded side brushes x4
• Extra high efficiency filter x1
• Flat cleaning tool x1
• 리모컨 x1
• Charging base station x1
• AC power adapter x1
• 사용설명서 x1
• Manufacturer's Warranty x1

Figure 1: Coredy R300 Robot Vacuum Cleaner and its remote control.

중요 안전 지침

Before using your Coredy R300, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 전원 스위치가 켜져 있는지 확인하세요 ON before using or charging the robot vacuum.
• Use only the original charging base and AC power adapter provided by Coredy.
• Do not operate the robot vacuum in wet environments or on wet surfaces.
• 헐렁한 옷, 머리카락, 손가락 및 신체의 모든 부분을 개구부와 움직이는 부분에서 멀리하십시오.
• 크거나 날카로운 물체, 액체, 또는 불붙거나 연기가 나는 물질을 집어 들지 마십시오.
• Regularly clean the dust bin and filters to maintain optimal performance and prevent overheating.
• 로봇 청소기가 작동하는 동안 어린이와 반려동물을 잘 살펴봐 주세요.
• Store the robot vacuum and charging base in a dry, safe place when not in use.

설정

1. 충전 거치대 배치

Select an open, uncluttered area against a wall for the charging base. Ensure there are no obstacles within 3 feet (1 meter) in front of the charging base and 1.5 feet (0.5 meters) on either side. Place the charging base flat on a hard floor to ensure stability and proper docking.

Figure 2: The robot vacuum automatically returns to its charging base.

2. 초기 충전

Before first use, fully charge the robot vacuum. Connect the AC power adapter to the charging base and plug it into a wall outlet. Place the robot vacuum onto the charging base, ensuring the charging contacts align. The indicator light on the robot will show charging status. A full charge typically takes several hours.

3. 측면 브러시 설치

Gently press the side brushes onto the square posts at the bottom of the robot until they click into place. Ensure the brushes are securely attached.

로봇 청소기 작동 방법

청소 모드

The Coredy R300 offers four distinct cleaning modes to suit various cleaning needs:

• 자동 청소: 로봇은 지능적으로 움직이며 바닥 전체를 청소합니다.
• 가장자리 청소: 로봇은 벽과 가구 가장자리를 따라 청소합니다.
• 얼룩 청소: 로봇은 특정 오염 부위에 집중하여 나선형 패턴으로 청소합니다.
• Low Noise Cleaning: Operates with reduced suction for quieter cleaning, suitable for times when minimal disturbance is desired.

Figure 3: The Coredy R300 offers multiple cleaning modes for versatile use.

리모컨 사용

The included remote control allows you to start, stop, schedule, and select cleaning modes for your R300. Refer to the remote control diagram in the physical manual for button functions.

내비게이션 및 센서

The R300 is equipped with upgraded anti-collision and anti-drop intelligent sensor technology, along with a pressure-sensitive soft bumper. These features enable the robot to navigate around obstacles, avoid falling down stairs, and clean effectively without damaging furniture.

Figure 4: Smart protection features help the robot navigate safely.

Runtime and Auto-Recharge

The R300 provides up to 110 minutes of continuous cleaning on a full charge. When the battery is low, the robot will automatically return to its charging base to recharge, ensuring it is always ready for the next cleaning cycle.

유지

Regular maintenance is crucial to keep your Coredy R300 operating at optimal performance.

먼지통 및 필터 청소

The dust bin should be emptied after each cleaning cycle, especially if cleaning pet hair. To clean the dust bin:

1. 로봇에서 먼지통을 제거하세요.
2. Open the dust bin and empty its contents into a trash receptacle.
3. Remove the filter assembly. Tap the HEPA filter gently to dislodge dust. For a more thorough clean, the dust bin and pre-filter can be rinsed with mild soap and water. Ensure all parts are completely dry before reassembling and placing back into the robot.
4. The HEPA filter should be replaced regularly, depending on usage, to maintain filtration efficiency.

Figure 5: Underside of the robot vacuum, showing components for maintenance.

사이드 브러시 유지 관리

Periodically check the side brushes for tangled hair or debris. Remove any obstructions to ensure effective cleaning. Replace worn or damaged side brushes with the provided spares.

센서 청소

Wipe the anti-drop and anti-collision sensors with a clean, dry cloth to remove dust and ensure proper function. Static charge can attract dust to the robot's surface and sensors; a soft cloth sprayed with static guard can be used to wipe down the exterior.

문제 해결

If you encounter issues with your Coredy R300, refer to the following common problems and solutions:

명세서

보증 및 지원

Your Coredy R300 Robot Vacuum Cleaner comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Coredy Customer Service. You can find contact information on the official Coredy web사이트나 구매 플랫폼을 통해서도 구매하실 수 있습니다.

For additional resources and product information, visit the official Coredy Store: Coredy Store on Amazon.