TC Electronic HALL OF FAME 2 REVERB Pedal Instruction Manual

1. 서론

The TC Electronic HALL OF FAME 2 REVERB is an iconic reverb pedal designed for guitarists seeking versatile and high-quality reverb effects. This manual provides essential information for setting up, operating, and maintaining your pedal.

2. 주요 특징

• Innovative MASH Technology: The footswitch transforms into a pressure-sensitive expression controller, allowing for dynamic real-time effect manipulation.
• Shimmer Reverb Algorithm: Elevates your reverb an octave through each feedback loop, delivering an ethereal and atmospheric sound.
• Next-Generation Reverb Algorithms: Provides realistic and phenomenal-sounding reverb tones.
• 톤프린트 활성화됨: Create and customize unique tones for your pedal using the free TonePrint app, offering endless sonic possibilities.

3. 제어 및 연결

그림 1: 상향식 view of the HALL OF FAME 2 REVERB pedal, showing controls and footswitch.

This image displays the top surface of the TC Electronic HALL OF FAME 2 REVERB pedal. Visible are four black rotary knobs and a single silver MASH footswitch. The knobs are labeled 'DECAY', 'TONE', 'LEVEL', and a multi-position 'TYPE' knob. The 'TYPE' knob allows selection between various reverb algorithms such as 'SPRING', 'PLATE', 'HALL', 'ROOM', 'CHURCH', 'MOD', 'LOFI', 'SHIMMER', and 'CLOUD'. The MASH footswitch is prominently located at the bottom center, featuring 'MASH' and 'TRUE BYPASS' labels.

그림 2: 측면 view of the pedal, highlighting input and output jacks.

이 이미지는 측면을 보여줍니다 view of the HALL OF FAME 2 REVERB pedal, revealing the input and output jacks. There are two input jacks labeled 'STEREO IN MONO' (1 and 2) and two output jacks labeled 'STEREO OUT MONO' (REVERB and 2). These 1/4-inch audio jacks allow for both mono and stereo connections, providing flexibility in signal routing.

그림 3: 후면 view of the pedal, showing power input and USB port.

The rear panel of the pedal is shown, featuring the power input and a USB port. The power input is a standard 9V DC 100mA jack. The USB port is used for connecting the pedal to a computer for TonePrint editing and firmware updates.

3.1. 컨트롤 노브

• DECAY : Controls the length of the reverb tail. Turn clockwise for longer decay, counter-clockwise for shorter.
• 음정: Adjusts the brightness or darkness of the reverb. Clockwise for brighter, counter-clockwise for darker.
• 수준: Sets the overall mix level of the reverb effect with your dry signal.
• 유형: A multi-position switch to select different reverb algorithms (Spring, Plate, Hall, Room, Church, Mod, Lofi, Shimmer, Cloud).

3.2. MASH 풋스위치

The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. It also functions as a true bypass switch for activating/deactivating the effect.

3.3. 연결

• INPUT (1/4" Mono/Stereo): Connect your instrument or previous pedal in the signal chain here. Supports mono or stereo input.
• OUTPUT (1/4" Mono/Stereo): 당신에게 연결 amplifier or next pedal in the signal chain. Supports mono or stereo output.
• POWER (9V DC, 100mA): Connect a regulated 9V DC power supply (center negative).
• USB 포트: For connecting to a computer to use the TonePrint Editor software and for firmware updates.

4. 설정 가이드

1. Ensure all audio equipment (amplifier, other pedals) is powered off.
2. Connect your guitar to the INPUT jack(s) of the HALL OF FAME 2 REVERB pedal.
3. Connect the OUTPUT jack(s) of the pedal to your amplifier 또는 신호 체인의 다음 페달.
4. Connect a regulated 9V DC power supply (center negative, 100mA minimum) to the POWER input.
5. 전원을 켜십시오 amplifier and other audio equipment.

5. 사용 설명서

5.1. 기본 동작

• 참여/우회: Press the MASH footswitch once to toggle the effect on or off. The LED indicator will illuminate when the effect is active.
• Selecting Reverb Type: Turn the TYPE knob to select your desired reverb algorithm.
• Adjusting Reverb Parameters: Use the DECAY, TONE, and LEVEL knobs to fine-tune the selected reverb type to your preference.

5.2. MASH Footswitch Functionality

The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. The specific parameter controlled by MASH can be customized using the TonePrint Editor.

5.3. TonePrint Functionality

The HALL OF FAME 2 REVERB is TonePrint enabled. This allows you to beam custom-tuned effects from your smartphone (via the free TonePrint app) directly to your pedal, or create your own unique reverb sounds using the TonePrint Editor software on your computer (via USB). Visit the TC Electronic website for more information and to download the app/software.

6. 기술 사양

면책 조항: 사양은 예고 없이 변경될 수 있습니다.

7. 문제 해결

• 소리 없음: 모든 케이블 연결 상태(기타, 페달 등)를 확인하세요. amplifier). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
• 약하거나 왜곡된 소리: Check instrument cables for damage. Ensure proper input levels from your guitar and output levels to your amplifier. Adjust the LEVEL knob on the pedal.
• Effect Not Changing: Ensure the TYPE knob is set correctly. If using TonePrint, verify the TonePrint has been successfully beamed to the pedal.
• MASH 풋스위치가 반응하지 않습니다: Ensure the pedal is powered and engaged. If customized via TonePrint, verify the MASH function is correctly assigned.

8. 보증 및 지원

Product warranty information is not available in the provided data. For detailed warranty terms and conditions, please refer to the official TC Electronic website or contact your local dealer. For technical support, visit the TC Electronic support page or consult the comprehensive online resources.