소개
This manual provides detailed instructions for the assembly, operation, and maintenance of your DHP Franklin Mid-Century Upholstered Daybed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
안전 정보
- 조립 설명서를 반드시 정확하게 따르십시오. 잘못 조립하면 불안정해지거나 부상을 입을 수 있습니다.
- 사용 전에 모든 볼트와 나사가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조이십시오.
- 최대 무게 제한인 400파운드를 초과하지 마십시오.
- 조립 중에는 어린이의 손이 닿지 않는 곳에 작은 부품을 보관하여 질식 위험을 방지하세요.
- 이 제품은 실내에서만 사용하도록 설계되었습니다.
- Use only the mattress size specified (Twin-size).
부품 목록
Before assembly, verify that all components are present and undamaged. Refer to the included hardware pack for specific part identifiers.
Image: Complete DHP Franklin Mid-Century Upholstered Daybed Frame in blue linen, twin size, shown in a room setting.
The daybed frame includes upholstered side panels, a back panel, wooden slats, support legs, and all necessary hardware for assembly. A standard twin-size mattress is required but not included.
설정 및 조립
Assembly typically requires two adults and the included tools. Follow these steps carefully:
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내세요. 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
- 다리 부착: Secure the tapered solid wood legs to the base of the daybed frame. Ensure they are firmly attached.
- 프레임 조립: Connect the upholstered side panels and back panel using the provided hardware. Do not fully tighten all screws until the entire frame is aligned. This allows for easier adjustment.
- Install Slat Base: Position the bentwood slats into the designated slots on the frame. The wood slat base provides support and air circulation for your mattress.
- 최종 조임: 모든 구성 요소를 제자리에 놓고 정렬한 후 모든 나사와 볼트를 완전히 조입니다.
- 매트리스 배치: Place a standard twin-size mattress (not included) onto the slat base. The raised sides of the daybed are designed to keep the mattress in place.
Image: Detailed dimensional drawing of the daybed frame, illustrating key measurements and structural components for assembly.
Image: Diagram highlighting design features such as thin track arms, bentwood slats, padded sides and back, tapered solid wood legs, and a sturdy metal and wood frame.
Video: Detailed assembly guide for the DHP Franklin Daybed, demonstrating step-by-step installation of components.
작동 지침
The DHP Franklin Daybed is designed for versatile use as both seating and an extra sleeping surface.
- 좌석: Use the daybed as a comfortable sofa for lounging, reading, or socializing. The padded back and sides provide support.
- 자고 있는: When needed, the daybed functions as a twin-size bed. Ensure a suitable twin mattress is placed on the slat base. No box spring is required.
- 매트리스 호환성: This daybed accommodates one standard twin-size mattress. For optimal comfort and appearance, a mattress thickness of 7 inches or more is recommended to cover the internal frame hardware.
Image: The DHP Franklin Daybed shown with a mattress and decorative pillows, illustrating its use as a comfortable seating area.
유지
Proper care will extend the life and appearance of your daybed.
- 청소: Wipe clean the upholstered surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the fabric.
- 하드웨어 검사: 모든 볼트와 나사가 단단히 조여져 있는지 정기적으로 점검하세요. 안정성을 유지하기 위해 필요에 따라 다시 조이세요.
- 원단 관리: For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner.
- 움직이는: When moving the daybed, lift it rather than dragging it to prevent damage to the legs and frame.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 데이베드가 불안정하거나 흔들거리는 느낌이 듭니다. | 느슨한 하드웨어. | Check and tighten all bolts and screws. Ensure legs are securely attached. |
| Difficulty aligning frame parts during assembly. | Screws were fully tightened too early. | Loosen all screws slightly, align the parts, then re-tighten securely. |
| Mattress slides forward. | Lack of friction between mattress and slats, or mattress is too thin. | Ensure the mattress is properly seated within the raised sides. Consider placing a non-slip mat (e.g., yoga mat) between the mattress and slats. A thicker mattress (7 inches or more) may also help. |
| 삐걱거리는 소리. | 연결 부위가 헐거워지거나 부품 사이에 마찰이 발생합니다. | Re-tighten all hardware. Apply a small amount of lubricant (e.g., silicone spray) to metal-on-metal contact points if necessary. |
명세서
| 모델 번호: | 4126619 |
| 제품 크기: | 78인치 길이 x 41.5인치 너비 x 33인치 높이 |
| 중량 제한: | 400파운드 |
| 순중량: | 88파운드 |
| 매트리스 크기: | 쌍둥이 (미포함) |
| 실내장식 소재: | 리넨 |
| 프레임 소재: | 금속과 나무 |
| 필요한 조립: | 예 |
| 관리 지침: | D로 깨끗이 닦아내세요amp 옷감 |
Image: The DHP Franklin Daybed shown without pillows, highlighting the mattress area and overall frame structure.
보증 및 지원
DHP provides a worry-free manufacturer warranty for this product. For specific warranty details, please refer to the documentation included with your purchase or contact DHP customer support.
For any questions, missing parts, or assistance with assembly, DHP customer support is available 7 days a week. Please visit the official DHP web웹사이트를 방문하시거나 구매 서류에서 연락처 정보를 확인하십시오.
Image: Graphic detailing DHP's commitment as a trusted furniture manufacturer, including customer support and warranty information.