BYGD BYGD A300W

BYGD 300W 차량용 파워 인버터 사용 설명서

Model: BYGD A300W

1. 제품 오버view

The BYGD 300W Car Power Inverter converts 12V DC vehicle power to 110V AC household power. It features dual AC outlets and four USB quick charging ports, providing a versatile power solution for various electronic devices on the go. This unit is designed for portability and includes multiple safety protections.

패키지 내용:

  • BYGD 300W 파워 인버터 1개
  • 1 x Cigarette Lighter Plug Cable
  • 2 x Alligator Battery Clips
  • 2 x 30A External Fuses
  • 1 x 사용자 설명서
BYGD 300W Car Power Inverter with included accessories
Image 1: The BYGD 300W Car Power Inverter shown with its dual AC outlets, four USB ports, ON/OFF switch, and included cigarette lighter cable and battery clamps.

2. 중요한 안전 정보

Read and understand all safety instructions before operating the inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • 입력 Voltage: Do not connect the inverter to power sources exceeding 12V DC. Connecting to 24V or 48V systems will damage the unit.
  • 전력 제한: For devices exceeding 150W, connect the inverter directly to the vehicle battery using the provided alligator clips. Do not use the cigarette lighter plug for loads above 150W.
  • 차량 운행: Ensure the inverter's ON/OFF switch is in the "OFF" position when leaving the vehicle to prevent battery drain.
  • 통풍: Ensure adequate ventilation around the inverter. Do not block cooling vents.
  • 환경: Avoid exposing the inverter to water, rain, or excessive moisture. Do not operate in flammable environments.
  • 수정 사항: Do not attempt to open or modify the inverter. Servicing should only be performed by qualified personnel.

3. 제품 특징

  • 전력 출력: Provides 300W continuous power and 600W peak power.
  • 출력 포트: Equipped with two US standard 110V AC outlets and four 2.4A USB quick charging ports.
  • 입력 옵션: Connects to vehicle's 12V DC power via cigarette lighter plug or directly to battery terminals using alligator clips.
  • 안전 보호 : Built-in multi-protection system guards against over voltag전자, 낮은 볼륨tage, overload, short circuit, over heat, and over charge.
  • 냉각 시스템: Features an intelligent, silent automatic control cooling fan for efficient heat dissipation.
  • 내구성 있는 구조: Made from ABS fireproof material for enhanced safety and durability.
  • 컴팩트한 디자인: Measures 6.5 x 4.5 x 2.5 inches and weighs 1.2 lbs (550g) for portability.
BYGD 300W Car Power Inverter Multi-Protection features
Image 2: Visual representation of the inverter's multi-protection features, including over voltag예, 과부하, 낮은 볼륨tage, overheating, and short circuit protection.
BYGD 300W Car Power Inverter front and rear view 라벨이 붙은 구성 요소 포함
이미지 3: 상세 views of the inverter's front panel showing AC outlets, USB ports, power indicator, and ON/OFF switch, and the rear panel with positive and negative pole terminals, removable fuse, and cooling fan.

4. 설정 지침

The BYGD 300W Car Power Inverter offers two connection methods:

4.1. Cigarette Lighter Connection (Up to 150W)

  1. 인버터의 전원 스위치가 "OFF" 위치에 있는지 확인하십시오.
  2. Insert the cigarette lighter plug cable firmly into the inverter's DC input port.
  3. Plug the other end of the cigarette lighter cable into your vehicle's 12V cigarette lighter socket.
  4. 섹션 5: 작동 지침으로 진행하십시오.

메모: This connection method is suitable for devices consuming up to 150W. For higher power devices, use the battery clamp 연결.

4.2. 배터리 CLamp Connection (Up to 300W)

  1. 인버터의 전원 스위치가 "OFF" 위치에 있는지 확인하십시오.
  2. Connect the red alligator clip to the inverter's positive (+) terminal and the black alligator clip to the negative (-) terminal. Ensure connections are secure.
  3. Connect the red alligator clip to the positive (+) terminal of your vehicle's 12V battery.
  4. Connect the black alligator clip to the negative (-) terminal of your vehicle's 12V battery.
  5. 섹션 5: 작동 지침으로 진행하십시오.

주의: Always connect the inverter to the battery before turning it on. Ensure correct polarity (red to positive, black to negative) to prevent damage.

BYGD 300W Car Power Inverter with dimensions and connection cables
Image 4: The inverter's dimensions are shown, along with the cigarette lighter cable and alligator battery clamps for different connection modes.

5. 사용 설명서

  1. After connecting the inverter to the 12V DC power source (cigarette lighter or battery), press the "ON/OFF" switch on the inverter to the "ON" position.
  2. The green "POWER" indicator light will illuminate, indicating the inverter is operational.
  3. Plug your AC devices into the 110V AC outlets or your USB devices into the USB charging ports.
  4. 연결된 모든 기기의 총 전력 소비량이 300W를 초과하지 않도록 하십시오.
  5. When finished, turn the inverter's "ON/OFF" switch to the "OFF" position and disconnect it from the power source.

중요한: Some devices, especially those with motors or heating elements, may have a higher startup (peak) wattage than their continuous wattage. Ensure the device's peak wattage does not exceed the inverter's 600W peak capacity.

BYGD 300W Car Power Inverter showing compatible and incompatible devices
Image 5: Illustrates a wide range of compatible devices such as phones, tablets, TVs, shavers, computers, notebooks, and cameras. It also indicates incompatible high-power appliances like hair dryers, electric pans, coffee makers, and microwaves.
BYGD 300W Car Power Inverter in various usage scenarios
이미지 6: Examples of the inverter's application, including use during long journeys, camping, for in-car entertainment, and charging office items.
BYGD 300W Car Power Inverter in use inside a car
Image 7: The inverter positioned in a vehicle's center console, demonstrating its compact size and ease of access for charging devices.

6. 유지관리

  • 청소: Periodically clean the exterior of the inverter with a dry, soft cloth. Do not use liquid cleaners.
  • 통풍: 냉각 팬과 통풍구에 먼지와 이물질이 없도록 하여 적절한 공기 흐름을 유지하십시오.
  • 퓨즈 교체: The inverter includes two external 30A fuses. If the inverter stops working and the "FAULT" indicator is lit, check and replace the fuses if necessary. Always use fuses of the same type and rating (30A).
  • 저장: 사용하지 않을 때는 인버터를 직사광선과 습기를 피해 서늘하고 건조한 곳에 보관하십시오.

7. 문제 해결

문제가능한 원인해결책
No power output, Power indicator OFF.
  • Inverter switch is OFF.
  • Loose connection to 12V source.
  • 차량의 시가 라이터 퓨즈가 끊어졌습니다.
  • Inverter's internal/external fuse blown.
  • Turn inverter switch to "ON".
  • 모든 연결을 확인하고 보호하십시오.
  • Replace vehicle's cigarette lighter fuse.
  • Replace inverter's external 30A fuses.
Inverter shuts down, Fault indicator ON.
  • 과부하(장치 전력)tage 너무 높음).
  • Overheating (poor ventilation).
  • 연결된 장치에 단락이 발생했습니다.
  • Reduce load; ensure total wattage is below 300W.
  • Ensure vents are clear; allow inverter to cool.
  • Disconnect device; check for faults.
Audible alarm (beeping).
  • 낮은 입력 볼륨tage (vehicle battery low).
  • 높은 입력 볼륨tage.
  • 차량 엔진을 시동하여 배터리를 충전하십시오.
  • Ensure input is 12V DC only.

8. 사양

모델BYGD A300W
입력 Voltage직류 12V
출력 볼륨tage교류 110V
연속 전력300와트
피크 파워600와트
USB 출력4 x 2.4A (Quick Charging)
치수(길이 x 너비 x 높이)6.5 x 4.5 x 2.5 인치
무게1.2g (550 파운드)
재료ABS 내화

9. 보증 및 지원

The BYGD 300W Car Power Inverter is covered by an 18개월 보증 구매일로부터. 본 보증은 정상적인 사용 중에 발생한 제조상의 결함 및 제조상의 결함을 보장합니다.

For technical support, warranty claims, or any questions regarding your product, please contact BYGD customer service. Refer to the contact information provided in your product packaging or visit the official BYGD web도움이 필요한 경우 사이트를 방문하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.