HyperGear 14704

HyperGear Wave 휴대용 무선 블루투스 스피커 14704 사용 설명서

Model: 14704 | Brand: HyperGear

소개

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

HyperGear Wave speaker with water splashing around it

Image: HyperGear Wave speaker, showcasin물 튀김에도 견딜 수 있는 방수 설계입니다.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • HyperGear Wave Speaker
  • 3.5mm Stereo Auxiliary Cable
  • 마이크로 USB 충전 케이블
  • 사용 설명서 (본 문서)
HyperGear Wave speaker and its included accessories: auxiliary cable and micro USB charging cable

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

설정

1. 스피커 충전

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. 전원 켜기 / 끄기

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

작동 지침

1. 블루투스 페어링

  1. Ensure the speaker is powered on and within 33 feet (10 meters) of your Bluetooth-enabled device.
  2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
  3. 기기에서 블루투스 설정으로 이동하여 사용 가능한 기기를 검색하세요.
  4. Select "HyperGear Wave" (or similar name) from the list.
  5. 페어링이 완료되면 스피커에서 확인음이 나고 LED 표시등이 계속 켜집니다.

스피커의 전원이 켜지면 마지막으로 페어링된 기기에 자동으로 다시 연결을 시도합니다.

HyperGear Wave speaker on sand with people in background, illustrating wireless use

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. 기본 제어

  • 재생/일시 중지: 재생/일시정지 버튼을 한 번 누르세요.
  • 볼륨 업: '+' 버튼을 누르세요.
  • 볼륨 작게 : '-' 버튼을 누르세요.
  • 다음 트랙: '+' 버튼을 길게 누르세요.
  • 이전 트랙 : '-' 버튼을 길게 누르세요.
  • 전화 받기/종료: 전화가 걸려오는 동안 재생/일시정지 버튼을 한 번 누르세요.
  • 전화 거부: 전화가 오는 동안 재생/일시 중지 버튼을 길게 누르세요.

3. 오디오 입력 모드

The HyperGear Wave speaker supports multiple audio input options:

  • 블루투스 모드 : 기본 무선 연결입니다.
  • Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
  • 마이크로 SD 카드 모드: Insert a Micro SD card (not included) with audio file지정된 슬롯에 카드를 삽입하십시오. 스피커가 카드를 자동으로 감지하여 음악을 재생합니다.
Close-up of HyperGear Wave speaker showing Bluetooth, Auxiliary, and Micro SD icons

이미지: 클로즈업 view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

유지

  • 청소: 부드러운 d를 사용하세요amp 스피커 외부를 닦을 때는 천을 사용하십시오. 독한 화학 약품이나 연마성 세척제는 사용하지 마십시오.
  • 물 노출: IPX4 방수 등급이지만 스피커를 물에 완전히 잠기게 하지 마십시오. 물에 노출시키기 전에 모든 포트 덮개가 단단히 닫혀 있는지 확인하십시오.
  • 저장: 스피커는 극한의 온도와 직사광선을 피해 서늘하고 건조한 곳에 보관하세요.
  • 배터리 관리 : 배터리 수명을 연장하려면 스피커를 자주 완전히 방전시키지 마세요. 장시간 사용하지 않더라도 정기적으로 충전하세요.
HyperGear Wave speaker on a kayak, demonstrating its splash-proof design

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

문제 해결

  • 스피커가 켜지지 않습니다. 배터리가 충전되었는지 확인하세요. 충전 케이블을 연결하고 다시 시도해 보세요.
  • Bluetooth 장치와 페어링할 수 없습니다:
    • 스피커가 페어링 모드(LED가 깜박임)인지 확인하세요.
    • 기기에서 Bluetooth가 활성화되어 있는지 확인하세요.
    • 스피커를 기기 가까이로 이동하세요(33피트 이내).
    • 스피커와 기기의 Bluetooth를 모두 껐다가 켜세요.
    • Forget the speaker from your device's Bluetooth list and attempt to re-pair.
  • 소리가 나지 않거나 볼륨이 낮음:
    • 스피커와 연결된 기기의 볼륨을 조절하세요.
    • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
    • 오디오 소스가 재생되고 있는지 확인하세요.
  • 음질이 좋지 않음:
    • 간섭을 피하려면 스피커를 블루투스 기기에 더 가까이 옮기세요.
    • 스피커와 장치 사이에 장애물이 없는지 확인하세요.
    • If using AUX, check the cable for damage and ensure it's fully inserted.

명세서

모델명HyperGear Wave
모델 번호14704
스피커 유형집 밖의
연결 기술블루투스, 무선
블루투스 범위33피트(10미터)
방수성IPX4 방수
오디오 출력 전력10 와트
오디오 출력 모드스테레오 재생
노는 시간최대 4시간
전원배터리 구동
품목 무게362.87그램(12.8온스)
제품 치수8.2 x 2.6 x 2.9 인치

보증 및 지원

보증 정보

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear web대지.

고객 지원

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear web대지: www.hypergear.com.

© 2023 HyperGear. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.