FLEXISPOT OC3 에어 인체공학적 사무용 의자 사용 설명서

1. 서론

This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT OC3 Air Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

2. 안전 정보

• This product has a maximum weight capacity of 300 lbs. Do not exceed this limit.
• Improper use of adjustable features, such as the armrests and tilt mechanism, could result in injury.
• 항상 조립 지침을 주의 깊게 따르세요.
• Refer to this user manual for safe operation and adjustments.
• Keep children away from the chair during assembly and adjustment to prevent accidents.

3. 패키지 내용

조립을 시작하기 전에 모든 부품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 손상된 경우 고객 지원 센터로 문의하십시오.

• Backrest (x1)
• 좌석 (1개)
• Mechanism (x1)
• Gas Lift (x1)
• Headrest (x1)
• Clothes Hanger (x1)
• 캐스터(x5)
• 렌치(x2)
• Armrest (x2)
• 베이스 (x1)
• Screws: M6*25 (6pcs), M6*20 (4pcs), M8*18 (3pcs)
• 설치 설명서(x1)

Image: All components of the FLEXISPOT OC3 Air chair laid out for assembly.

4. 조립 설명서

Assembly is required. An installation manual and tools are included. Follow the steps below for proper assembly.

1. 바퀴와 가스 리프트를 설치하세요: Insert the five casters into the base. Then, insert the gas lift into the center hole of the base. Remove the protective cover from the gas lift before installation.
2. Attach Mechanism to Backrest: Secure the chair mechanism to the backrest using the provided M8*18 screws. Ensure correct alignment before tightening.
3. 팔걸이 설치: Attach the armrests to the seat using the M6*25 screws. Do not fully tighten all screws until they are fixed in the correct position.
4. 좌석에 메커니즘 설치: Secure the mechanism to the underside of the seat using the M6*20 screws.
5. Place Seat on Gas Lift: Carefully place the assembled seat and backrest onto the gas lift, ensuring it is securely seated.
6. Attach Headrest and Clothes Hanger: Unscrew the two screws on the headrest, insert the clothes hanger into the headrest, and secure them on the backrest.

Image: Diagram illustrating the assembly of the chair's base and gas lift.

Image: Diagram illustrating the attachment of the backrest, armrests, and seat.

5. Operating Instructions (Adjustable Features)

Your FLEXISPOT OC3 Air chair is designed with multiple adjustable features to enhance comfort and support.

• 좌석 높이 조정: Use the lever located under the seat to raise or lower the chair to your desired height. Pull the lever up while seated to lower, or pull up while standing to raise.
• 2D 헤드레스트 조절: The headrest can be adjusted in multiple dimensions (up/down and 30° rotation) to provide precise neck and head support. Simply push or pull the headrest to adjust its height and angle.
• 조정 가능한 요추 지지대: The lumbar support can be moved up and down by 1.9 inches to provide accurate support to your lower back. Adjust it to fit the natural curve of your spine.
• Lockable Backrest Tilt (90-130°): The chair features a four-level tilt tension lockable line control mechanism. Use the lever to recline the backrest between 90° and 130° or lock it in an upright position.
• 조정 가능한 팔걸이: The armrests can be adjusted in height (1D Up/Down) to provide comfortable support for your arms and shoulders. Use the button on the side of the armrest to unlock and adjust.
• 옷걸이: A convenient hanger is integrated into the headrest for temporarily holding clothes.

이미지: 이상view of chair dimensions and adjustable features.

Image: Visual guide to chair adjustments.

6. 유지관리

To ensure the longevity and optimal performance of your FLEXISPOT OC3 Air chair, follow these simple maintenance guidelines:

• 청소: 광고로 깨끗이 닦아내세요amp 천 소재를 사용하십시오. 그물망이나 틀을 손상시킬 수 있는 독한 화학 약품이나 연마성 세척제 사용을 피하십시오.
• 정기 검사: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
• 과부하를 피하세요: 최대 중량 용량인 300파운드를 초과하지 마십시오.
• 적절한 사용: Use the chair as intended for office or home workspace. Avoid standing on the chair or using it for purposes other than seating.

7. 문제 해결

If you encounter any issues with your FLEXISPOT OC3 Air chair, please refer to the assembly instructions or contact customer support for assistance.

• 높이 조절의 어려움: Ensure the gas lift protective cover has been removed and the lever is fully engaged.
• 의자 흔들림: Check that all screws are securely tightened and the base is properly assembled.
• 등받이가 기울어지거나 고정되지 않음: Verify that the tilt tension mechanism is correctly engaged and not obstructed.

8. 사양

9. 보증 및 지원

보증 정보 또는 기술 지원에 대해서는 FLEXISPOT 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.