소개
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your XPOWER X-35AR Pro Industrial Axial Fan. Please read all instructions carefully before use and retain this manual for future reference.
안전 정보
- 선풍기는 항상 안정적이고 평평한 곳에 놓아야 합니다.
- 손상된 코드나 플러그로 팬을 작동하지 마십시오.
- 팬이 작동하는 동안 어린이와 애완동물이 팬에 접근하지 못하도록 하세요.
- Avoid placing objects through the fan grilles.
- 청소나 유지관리 작업을 하기 전에는 반드시 팬의 플러그를 전원 콘센트에서 뽑아주세요.
- This fan is designed for indoor use in high-temperature environments up to 180°F (82°C). It does not produce heat.
설정
Follow these steps to set up your XPOWER X-35AR Pro Axial Fan:
- 짐 풀기: Carefully remove the fan from its packaging. Inspect for any damage during transit.
- 놓기: Position the fan on a firm, flat surface. Ensure there is adequate clearance around the intake and exhaust grilles for optimal airflow.
- Rack/Stand Adjustment: The fan includes a rack/stand that allows for 360-degree rotation. Loosen the adjustment knobs on the sides of the stand to tilt the fan to your desired angle. Tighten the knobs securely to lock the position.
작동 지침
To operate your XPOWER X-35AR Pro Axial Fan:
- 전원 연결: Plug the fan's power cord into a standard electrical outlet.
- 전원 켜기/끄기: Locate the power switch or button on the control panel. Press to turn the fan ON. Press again to turn it OFF.
- 가변 속도 제어: The fan features variable speed control. Use the designated knob or buttons to adjust the airflow intensity from low to high, according to your requirements.
- 내장형 전원 콘센트: The fan is equipped with built-in power outlets. These allow you to daisy-chain multiple XPOWER fans for extended coverage or to power other compatible devices (e.g., power tools, mobile phone chargers). Ensure the total current draw does not exceed the fan's rated capacity.
- 기류 방향 조정: Loosen the side knobs on the stand, adjust the fan to the desired angle (up to 360 degrees), and then re-tighten the knobs to secure its position.
유지
정기적인 유지 관리는 선풍기의 최적 성능과 수명 연장을 보장합니다.
- 청소: Disconnect the fan from the power source before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. For the grilles and blades, use a vacuum cleaner with a brush attachment or compressed air to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
- 저장: When not in use, store the fan in a clean, dry place. The fan can be stacked up to 5 units high for efficient storage or transportation. Wrap the 20 ft. power cord around the integrated cord wrap for neat storage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 켜지지 않습니다. | No power supply; power cord not fully plugged in; circuit breaker tripped. | 전원 콘센트를 확인하세요. 전원 코드가 단단히 꽂혀 있는지 확인하세요. 회로 차단기를 재설정하세요. |
| 감소된 기류. | Grilles or blades are obstructed by dust/debris. | Unplug fan and clean grilles and blades as per maintenance instructions. |
| 작동 중 비정상적인 소음이 발생합니다. | Loose components; debris inside the fan. | Unplug fan and inspect for loose parts or foreign objects. If noise persists, contact customer support. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | X-35AR Pro |
| 상표 | 엑스파워 |
| 모터 | 1/4 HP Sealed Induction Motor |
| 공기 흐름(최대) | 1720 CFM(분당 입방 피트) |
| Amperage (Max) | 1.6 Amps |
| 전원 | 코드식 전기 |
| 권tage | 12 볼트 |
| 왓tage | 184 와트 |
| 제품 크기(D x W x H) | 9.2인치 x 18.6인치 x 19.4인치 |
| 무게 | 17.6파운드 |
| 재료 | Polycarbonate Housing, Plastic Blades |
| 코드 길이 | 20 피트 |
| 특별 기능 | Variable Speed, Built-in Power Outlets, 360-degree Rotation, Stackable |
| 실내/실외 사용 | 실내 |
보증 및 지원
The XPOWER X-35AR Pro Industrial Axial Fan is backed by a 1년 제조사 제한 보증. 본 보증은 정상적인 사용 중에 발생하는 재료 및 제조상의 결함을 보장합니다.
For warranty claims, technical support, or service inquiries, please contact XPOWER customer support. Refer to the official XPOWER web최신 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.