샤프 원자 시계 사용 설명서

소개

The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.

제품 특징

• Atomic Time Accuracy: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
• Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
• Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
• 무선 실외 센서: Transmits outdoor temperature data to the main unit.
• 배터리 구동: Operates on batteries for flexible placement (batteries not included).
• 자동 일광 절약 시간(DST) 조정: Automatically adjusts for daylight saving time changes.
• 선택 가능한 시간대: Allows selection of various US time zones.
• 12/24시간 형식: Option to display time in either 12-hour or 24-hour format.
• Celsius/Fahrenheit Display: 섭씨와 화씨 온도 단위를 전환합니다.

패키지 내용

설치를 진행하기 전에 모든 구성품이 있는지 확인하십시오.

• 샤프 원자시계 본체
• 무선 옥외용 센서
• 사용 설명서

Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.

설정

1. 배터리 설치

1. Open the battery compartment on the back of the main clock unit.
2. AA 건전지 2개를 넣을 때, +극과 -극을 정확히 맞춰주세요.
3. 배터리 덮개를 닫습니다.
4. 무선 실외 센서의 배터리함을 여세요.
5. Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
6. Close the outdoor sensor's battery compartment cover.

2. 초기 동기화 및 설정

After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.

• 시간대: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
• 12/24시간 형식: Press the "12/24" button to switch between 12-hour and 24-hour display.
• 섭씨/화씨: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
• Outdoor Sensor Pairing: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.

For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.

작업

디스플레이 정보

The clock's large LCD screen displays the following information:

• 시간: Current time in selected 12-hour or 24-hour format.
• PM 지표: Displays "PM" for afternoon hours in 12-hour format.
• 원자 신호 표시기: Shows the status of the WWVB atomic time signal reception.
• 실내 온도: 현재 온도는 본체에서 측정되었습니다.
• Month/Date/Day: 현재 일정 정보입니다.
• 야외 온도: Current temperature measured by the wireless outdoor sensor.
• Outdoor Sensor Channel: Indicates the channel the outdoor sensor is transmitting on.
• 배터리 부족 표시기: An icon will appear when batteries are low and need replacement.

Button Functions (Rear Panel)

유지

• 배터리 교체: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
• 청소: 시계와 센서는 부드럽고 마른 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 야외 센서 배치: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.

문제 해결

• Clock not syncing with atomic time:
  • Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
  • Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
  • Press the "WAVE" button to initiate a manual signal search.
  • 최초 동기화에는 최대 24시간이 소요될 수 있습니다.
• Outdoor temperature not displaying or incorrect:
  • Check batteries in the outdoor sensor.
  • Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
  • 연결을 다시 설정하려면 본체의 "채널" 버튼을 누르십시오.
  • Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
• 디스플레이가 어둡거나 비어 있음:
  • Replace all batteries in the main unit with fresh ones.
  • 배터리가 올바른 극성에 맞게 삽입되었는지 확인하세요.
• 시간이나 날짜가 잘못되었습니다:
  • 올바른 시간대가 선택되었는지 확인하세요.
  • Check if Daylight Saving Time (DST) setting is correct for your region.
  • If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.

명세서

보증 및 지원

Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.