1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schellenberg 20222 Maxi Action Roller Shutter Motor. This tubular motor is designed for the Maxi roller shutter system, suitable for octagonal steel shafts with a 60 mm diameter. It offers convenient electrical control for roller shutters up to 3.0 m² and a maximum weight of 15 kg. Please read these instructions carefully before installation and use to ensure safe and efficient operation.
2. 안전 지침
- Installation and electrical connections must only be performed by qualified personnel in accordance with local regulations.
- 설치, 유지보수 또는 수리 작업을 수행하기 전에 전원을 차단하십시오.
- Ensure that the roller shutter system is in good mechanical condition and moves freely before installing the motor.
- Keep children and pets away from the operating roller shutter.
- Do not operate the motor if any part is damaged or if the power cable is frayed.
- This motor is designed for indoor use within a roller shutter box. Do not expose it to moisture or extreme temperatures.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1x Tubular Motor
- 1x Adapter Kit (for 60mm octagonal shaft)
- 1x Wall Bracket with oblong hole
- 1x 조정 도구
- 1x Mounting Instructions (this manual)
4. 제품 오버view
The Schellenberg 20222 Maxi Action Roller Shutter Motor is a robust and reliable solution for automating your roller shutters. It features a 6 Nm torque, capable of handling roller shutters up to 3.0 m² and 15 kg. The motor is designed for direct mounting into a 60 mm octagonal steel shaft, ensuring efficient power transmission and reduced wear. End positions are set mechanically using the provided adjustment tool after installation.
5. 설정 및 설치
Proper installation is crucial for the motor's performance and longevity. Follow these steps carefully:
- 준비: Ensure the roller shutter box is accessible and the existing roller shutter is removed from the shaft. Verify that the octagonal steel shaft has a 60 mm diameter.
- 모터 조립: Attach the appropriate adapter and drive wheel from the adapter kit to the motor head. These components ensure a secure fit within the octag하나의 샤프트.
- 모터 삽입: Slide the assembled motor into the 60 mm octagonal steel shaft. Ensure it is fully seated and aligned.
- 설치: Secure the motor and shaft assembly within the roller shutter box using the provided wall bracket. The oblong hole in the bracket allows for minor adjustments.
- 전기 연결: Connect the motor's power cable to a suitable roller shutter switch or timer (sold separately) according to the wiring diagram provided with the switch/timer. Ensure all electrical connections are secure and insulated.
- 종료 위치 조정: After electrical connection and initial testing, use the adjustment tool to set the upper and lower end positions of the roller shutter. Insert the tool into the designated adjustment screws on the motor head and turn as instructed in the specific adjustment guide (usually found with the motor or switch).
6. 모터 작동
The Schellenberg Maxi Action Roller Shutter Motor is controlled via a separate roller shutter switch or timer. These control units allow you to raise, lower, and stop the roller shutter at any desired position.
- 수동 제어: Use the UP/DOWN buttons or rotary switch on your connected roller shutter switch to move the shutter.
- 타이머 제어: If using a Schellenberg timer, program desired opening and closing times. The motor will operate automatically according to the schedule.
- Multiple Motors: For controlling multiple motors simultaneously, a suitable relay may be required, depending on the control unit used. Consult the documentation for your specific control unit.
7. 유지관리
The Schellenberg Maxi Action Roller Shutter Motor is designed for maintenance-free operation. However, regular checks of the roller shutter system are recommended:
- Periodically inspect the roller shutter for any obstructions, damage, or signs of wear.
- Ensure the roller shutter moves smoothly and without excessive friction.
- Keep the area around the roller shutter and motor free from dust and debris.
- Do not lubricate the motor or its internal components.
8. 문제 해결
If you encounter issues with your roller shutter motor, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모터가 응답하지 않음 | 전원 공급이 없습니다 | 전기 연결과 회로 차단기를 확인하세요. |
| Motor runs, but shutter does not move | Shaft adapter not correctly installed or damaged | Inspect the adapter and ensure it is securely connected to both the motor and the shaft. |
| Shutter stops prematurely or does not reach end positions | End positions incorrectly set or obstruction | Re-adjust end positions using the adjustment tool. Check for any physical obstructions in the shutter's path. |
| 작동 중 이상한 소음이 발생합니다. | Mechanical friction or internal motor issue | Inspect the roller shutter for friction points. If the noise persists and is from the motor, contact support. |
If the problem persists after attempting these solutions, please contact Schellenberg customer support.
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 20222 |
| 상표 | Schellenberg |
| 스타일 | 6 Nm / max. 3 m² |
| 치수(길이 x 너비 x 높이) | 58 x 11 x 7.5cm |
| 무게 | 2그램 |
| Suitable Shaft Diameter | 60 mm (octagonal steel tubular shaft) |
| Max. Roller Shutter Area (Plastic) | 3.0 제곱미터 |
| Max. Roller Shutter Weight | 15kg |
| End Position Adjustment | 기계적 |
| 제어 방법 | Roller shutter switch or timer (not included) |
| 원산지 | 중국 |
10. 보증
Schellenberg products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Schellenberg web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
11. 지원
If you have any questions, require technical assistance, or need further information regarding your Schellenberg Maxi Action Roller Shutter Motor, please contact Schellenberg customer support:
- Web대지: Visit the official Schellenberg web자주 묻는 질문(FAQ), 추가 자료 및 연락처 정보를 제공하는 사이트입니다.
- 문의 양식: Use the contact form available on the web서면 문의를 위한 사이트입니다.
- 핸드폰: Refer to the Schellenberg web지역 고객 서비스 전화번호를 알려주는 사이트입니다.