EBTOOLS Universal Thumb Throttle Speed Control Instruction Manual

1. 제품 오버view

The EBTOOLS Universal Thumb Throttle Speed Control is designed for electric scooters and e-bikes, providing a convenient and precise method for speed regulation. This device is compatible with handlebars featuring a 22mm (7/8 inch) diameter. It features a durable construction and a simple three-wire connection for easy integration into your vehicle's electrical system.

Image 1.1: The EBTOOLS Universal Thumb Throttle, showing the main unit, coiled cable, and three wire connectors (red, black, green).

2. 안전 정보

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in property damage, injury, or death.

• Always disconnect the vehicle's power source before performing any installation or maintenance.
• 단락을 방지하기 위해 모든 전기 연결부가 단단히 고정되어 있고 적절하게 절연되어 있는지 확인하십시오.
• Verify that the throttle operates smoothly and returns to the idle position when released.
• Do not modify the throttle or its wiring. Use only as intended.
• Wear appropriate safety gear when operating electric scooters or e-bikes.
• 설치 단계에 대해 확실하지 않은 경우 자격을 갖춘 기술자에게 문의하세요.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x EBTOOLS Universal Thumb Throttle Speed Control

Image 3.1: The throttle unit, highlighting its universal compatibility for 7/8 inch handlebars, with an electric scooter visible in the background.

4. 제품 특징

• 보편적 인 호환성 : Designed for 22mm (7/8 inch) diameter handlebars.
• 내구성 있는 구조: Made from high-quality ABS material for longevity.
• 간편한 설치: Simple three-wire setup.
• 정밀한 속도 제어: Ergonomic thumb lever for smooth acceleration.
• 다양한 용도: Suitable for various electric scooters, e-bikes, and similar vehicles.

5. 설정 및 설치

Follow these steps to install the thumb throttle:

1. 핸들바를 준비하세요: Ensure the handlebar is clean and free from obstructions where the throttle will be mounted. The throttle is designed for 22mm (7/8 inch) handlebars.
2. 스로틀을 장착하세요: Slide the throttle unit onto the desired position on the handlebar. Secure it firmly using any provided fasteners or by tightening the integrated clamp.


Image 5.1: Visual guide demonstrating the placement and mounting of the thumb throttle on a scooter's handlebar.

3. 배선 연결: The throttle uses a standard three-wire connection.
   • 빨간색 선: Connect to the positive (+) power supply.
   • 검은색 와이어: Connect to the negative (-) ground.
   • 녹색 와이어: Connect to the signal input of your controller.
   Ensure these connections are made correctly to avoid damage to the throttle or the vehicle's electrical system. Refer to your vehicle's wiring diagram if necessary.

이미지 5.2: 상세 view of the thumb lever mechanism and the three color-coded wires (red, black, green) for electrical connection.
4. 보안 연결: After connecting, ensure all wires are properly insulated and secured to prevent accidental disconnections or damage from vibration.
5. 테스트 기능: Before riding, perform a static test to ensure the throttle responds correctly and smoothly.

6. 사용 설명서

To operate the EBTOOLS Thumb Throttle:

• Turn on your electric scooter or e-bike's power.
• Gently press the thumb lever forward to engage the motor and increase speed.
• Release the thumb lever to reduce speed or return to idle. The throttle is designed to return to its neutral position automatically.
• Always operate your vehicle responsibly and in accordance with local traffic laws.

7. 유지관리

Regular maintenance helps ensure the longevity and proper function of your thumb throttle:

• 청소: Wipe the throttle unit with a soft, damp 옷감. 가혹한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 점검: Periodically check the wiring for any signs of wear, fraying, or damage. Ensure all connections remain secure.
• 지렛대 작동: Ensure the thumb lever moves freely and smoothly without sticking. If it feels stiff, check for debris or damage.
• 환경 보호: While durable, avoid prolonged exposure to extreme weather conditions (heavy rain, direct sunlight, extreme temperatures) to extend the product's lifespan.

8. 문제 해결

If you encounter issues with your EBTOOLS Thumb Throttle, refer to the following common problems and solutions:

• 스로틀이 반응하지 않음:
  • Check all wire connections (red, black, green) to ensure they are correctly and securely attached.
  • Verify that the vehicle's power supply is on and functioning.
  • 배선에 단선이나 손상이 있는지 점검하십시오.
• 간헐적 작동:
  • 연결 부위가 단단히 고정되었는지, 헐거워지지 않았는지 확인하십시오.
  • Check for any moisture or debris inside the throttle unit.
• Throttle Lever Sticking:
  • Clean around the lever mechanism to remove any dirt or grit.
  • Ensure the throttle is not overtightened on the handlebar, which could impede movement.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원 센터 또는 자격을 갖춘 기술자에게 문의하십시오.

9. 사양

Image 9.1: Dimensional drawing of the thumb throttle, indicating measurements such as 4.8cm/1.9", 2.2cm/7/8", 4.3cm/1.7", 2.3cm/0.9", and 6.3cm/2.5".

10. 보증 및 지원

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the EBTOOLS customer service directly. Keep your purchase receipt as proof of purchase.