Sato One-Touch Timer TM-22 Instruction Manual

1. 제품 오버view

The Sato One-Touch Timer TM-22 is a versatile digital timer designed for various timing needs, from kitchen use to laboratory applications. It combines ease of use with practical features to enhance your daily tasks.

이미지 1: 앞면 view of the Sato One-Touch Timer TM-22. The timer features a clear digital display and control buttons.

주요 특징:

• Automatic Reset Alarm: The alarm sounds for 5 seconds at the set time and automatically resets to the initial set time.
• 간단한 조작: The primary key is for starting; no complex operations are required to stop the timer's alarm cycle.
• Dual Notification: Alerts users with both sound (70dB) and light.
• Drip-Proof Construction: Designed to resist splashes, making it suitable for kitchen environments.
• 다중 장착 옵션: Equipped with a magnet on the back for attachment to metal surfaces and a strap for hanging.
• 카운트다운 및 카운트업 기능: Supports both decreasing와 증가asing time measurements.

2. 설정

배터리 설치:

The TM-22 timer requires one AAA battery for operation. A battery is included with the unit.

1. 타이머 뒷면에서 배터리 덮개를 찾으세요.
2. 덮개를 밀거나 풀어서 수납 공간을 엽니다.
3. AAA 배터리 1개를 삽입할 때, 양극(+)과 음극(-) 단자가 배터리함 안쪽의 표시와 정확히 일치하는지 확인하십시오.
4. 배터리함 덮개를 단단히 다시 닫으십시오.

The timer should power on, and the display will show '00:00' or the last set time.

3. 사용 설명서

The TM-22 timer features both countdown and count-up functionalities.

3.1. 카운트다운 타이머

This function allows you to set a specific duration, and the timer will count down to zero.

1. 시간 설정: Use the 'M' (Minute) button and 'S' (Second) button to adjust the desired countdown duration. The timer can be set from 1 second up to 99 minutes and 59 seconds.
2. 카운트다운 시작: Press the 'START' button to begin the countdown.
3. 알람 알림: When the time reaches zero, an alarm will sound for 5 seconds, accompanied by a flashing light.
4. 자동 재설정: After the 5-second alarm, the timer automatically resets to the initial set time, ready for the next countdown without manual intervention.
5. 일시중지/중지: To pause the countdown, press the 'START' button again. To resume, press 'START' once more. To clear the set time, press the 'RESET' button (if available) or hold the 'START' button for a few seconds.

3.2. Count-up Timer

This function measures elapsed time from zero.

1. Start Count-up: Ensure the timer display shows '00:00'. If not, press the 'RESET' button to clear any previous settings. Press the 'START' button to begin counting upwards from zero.
2. 일시 중지/재개: To pause the count-up, press the 'START' button. To resume, press 'START' again.
3. 재설정 : To reset the count-up timer to '00:00', press the 'RESET' button (if available) or hold the 'START' button for a few seconds while paused.

4. 유지관리

청소:

To maintain the timer's appearance and functionality:

• Wipe the exterior of the timer with a soft, dry cloth.
• 연마성 세척제, 용제 또는 화학 약품을 사용하지 마십시오. 이러한 제품은 표면을 손상시킬 수 있습니다.asing 또는 디스플레이.
• The timer is drip-proof, but do not immerse it in water or expose it to heavy splashing.

배터리 교체:

Replace the battery when the display becomes dim or the timer's functions become erratic.

• Follow the battery installation steps outlined in the "2. Setup" section.
• Always use a fresh AAA battery.
• 사용한 배터리는 현지 규정에 따라 폐기하십시오.

5. 문제 해결

If you encounter issues with your TM-22 timer, refer to the following common problems and solutions:

6. 사양

7. 보증 및 지원

For warranty information, technical assistance, or customer support regarding your Sato One-Touch Timer TM-22, please contact your authorized retailer or the manufacturer, Sato Corporation. Keep your purchase receipt as proof of purchase.

Please visit the official Sato web최신 지원 정보와 연락처 정보는 사이트에서 확인하세요.