디지텍 왐미 DT

DigiTech Whammy DT Pedal Instruction Manual

Model: Whammy DT

1. 서론

The DigiTech Whammy DT is an advanced pitch-shifting effects pedal designed for guitarists. It combines classic Whammy effects with drop and raised tuning capabilities, allowing for on-the-fly key changes without guitar retuning. This manual provides essential information for setting up, operating, and maintaining your Whammy DT pedal.

2. 주요 특징

3. 설정

Proper setup ensures optimal performance of your Whammy DT pedal.

3.1 전원 연결

제공된 전원 공급 장치를 연결하십시오. 9V DC 입력 jack on the pedal and then to a standard AC power outlet. The pedal requires a corded electric power source and draws approximately 50 Milliamps.

3.2 오디오 연결

  1. 기타를 연결하십시오. 입력 jack on the Whammy DT using a standard 1/4-inch instrument cable.
  2. 연결하다 산출 jack of the Whammy DT to your amplifier or other effects pedals using another 1/4-inch instrument cable.

3.3 Pedal Placement

For best results, place the Whammy DT early in your signal chain, typically after any compression or wah pedals, but before modulation, delay, or reverb effects. This ensures the pitch shifting is applied to a clean signal.

DigiTech Whammy DT Pedal with power supply and cables

Figure 3.1: The DigiTech Whammy DT pedal, showing its robust construction and typical connections. The image displays the pedal's main body, footswitches, and expression pedal.

4. 사용 설명서

The Whammy DT offers a range of pitch-shifting effects controlled by its footswitches and expression pedal.

4.1 Drop Tune and Raised Tune Functions

The Whammy DT allows you to instantly change your guitar's tuning up or down without physically adjusting the tuning pegs. Use the dedicated controls to select the desired interval, from a single half step to a full octave. Engage the effect to apply the tuning shift.

4.2 Classic Whammy Effects

Engage the Whammy effect and use the expression pedal to bend your pitch up or down. The pedal offers various Whammy voicings, allowing for classic dive bombs, harmonized shifts, and octave effects. Refer to the pedal's control layout for specific mode selections.

4.3 순간 작동 풋스위치

The momentary footswitch provides quick, on-demand pitch shifts. Press and hold the footswitch to activate a pre-selected pitch shift, creating "hammer-on" or "pull-off" effects. Release the footswitch to return to the original pitch. This is useful for rapid chord shifts or dynamic note changes during solos.

5. 유지관리

To ensure the longevity and optimal performance of your DigiTech Whammy DT pedal, follow these maintenance guidelines:

6. 문제 해결

If you encounter issues with your Whammy DT pedal, try the following steps:

7. 사양

특징세부 사항
모델와미DT
품목 무게5.9파운드(2.68kg)
제품 치수8 x 12 x 12인치(20.32 x 30.48 x 30.48cm)
신호 형식비슷한 물건
전원코드식 전기
Amp에라 지50밀리amps
진정한 우회

8. 보증 및 지원

자세한 보증 정보 및 기술 지원은 DigiTech 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

온라인 지원: Visit DigiTech Support