Monoprice SSW-8 Slim Powered Subwoofer Instruction Manual

1. 서론

The Monoprice SSW-8 is an 8-inch, 100-watt powered subwoofer designed for flexible placement in various home audio environments. Its slim, low-profile, ported enclosure allows for discreet integration, such as under furniture or mounted on a wall. This manual provides essential information for the safe and effective setup, operation, and maintenance of your subwoofer.

2. 안전 정보

• 전원: Connect the subwoofer only to a power outlet of the type described in this manual or on the unit.
• 통풍: 적절한 환기를 확보하십시오. 환기구를 막지 마십시오.
• 물과 습기: 제품을 비, 습기 또는 과도한 습도에 노출시키지 마십시오. 꽃병과 같이 액체가 담긴 물건을 제품 위에 올려놓지 마십시오.
• 열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음 포함)와 같은 열원 근처에 장치를 두지 마십시오. amp열을 생성하는 발전기.
• 청소: 마른 천으로만 닦으십시오.
• 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
• 놓기: Avoid placing the subwoofer in unstable locations where it could fall and cause injury or damage.

3. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• Monoprice SSW-8 Powered Slim 8 Inch Subwoofer
• 벽 장착 브래킷
• Floor stand (if applicable)
• RCA cable (may include 90-degree plugs)
• 전원 케이블
• 사용자 설명서

4. 제품 특징

• 슬림, 로우 프로file 설계: The ported cabinet is engineered to deliver ample bass output from a compact enclosure, allowing placement under chairs, sofas, or behind TV stands.
• 8-inch Ported Woofer: Features a full-sized 8-inch woofer in a bass-reflex enclosure, maximizing bass output with a frequency response extending down to 30Hz.
• 100와트 Amp정수기: Equipped with a dedicated 100-watt amplifier for subwoofers, offering controls for volume, low-pass filter, and phase.
• 다양한 입력: Includes both line-level RCA jacks and speaker-level terminal inputs for broad compatibility with audio systems.
• 장착 옵션: Supplied with on-wall mounting brackets for flexible installation.

5. 제어 및 연결

The rear panel of the subwoofer houses all controls and connection ports. Familiarize yourself with these components before setup.

Figure 1: Rear panel with controls and connections.

• 볼륨 레벨: 서브우퍼의 전체 출력 레벨을 조정합니다.
• 저역 통과 필터: Controls the upper frequency limit of the subwoofer. This allows you to blend the subwoofer's output with your main speakers.
• 위상 스위치: (0°/180°) Adjusts the phase of the subwoofer's output relative to your main speakers. This helps ensure bass frequencies arrive at your listening position in sync.
• 전원 모드: Selects between ON, AUTO, and OFF. In AUTO mode, the subwoofer will power on when an audio signal is detected and enter standby after a period of inactivity.
• Line In / Sub In (RCA): For connecting to the LFE or subwoofer output of your receiver/ampRCA 케이블을 사용하는 liifier.
• Speaker Level In: For connecting to the speaker outputs of your receiver/amplifier if it does not have a dedicated subwoofer output.
• 전원 입력: 제공된 전원 케이블을 연결합니다.

6. 설정

6.1 배치

The slim design of the SSW-8 offers versatile placement options:

• 가구 아래: Slide the subwoofer under a sofa, chair, or behind a TV stand for discreet integration.
• 벽면 장착: Use the included brackets to mount the subwoofer on a wall. Ensure the wall structure can support the weight of the unit.
• 바닥 배치: Place the subwoofer on the floor using its integrated feet or the optional floor stand. Experiment with different locations to find the best bass response in your listening area.

Figure 2: Subwoofer placed under a sofa.

Figure 3: Subwoofer with wall mount bracket.

6.2 연결

다음 연결 방법 중 하나를 선택하십시오.

RCA Line-Level Connection (Recommended)

1. Connect an RCA cable from the LFE or Subwoofer Output of your A/V receiver or amp에 대한 리퍼 Line In / Sub In port on the subwoofer.
2. Ensure your receiver's subwoofer output settings are configured correctly.

Speaker-Level Connection

1. 리시버의 메인 스피커 출력 단자에서 스피커 선을 연결하세요.amp에 대한 리퍼 스피커 레벨 인 terminals on the subwoofer.
2. Connect your main speakers to the corresponding speaker outputs on your receiver/amp평소처럼 증폭기입니다.

6.3 전원 연결

1. Once all audio connections are made, connect the supplied power cable to the 전원 입력 서브우퍼에.
2. 전원 케이블의 다른 쪽 끝을 적절한 벽면 콘센트에 꽂습니다.

7. 운영

7.1 초기 전원 켜기

설정하다 전원 모드 로 전환하다 자동차. The subwoofer will power on when an audio signal is detected and enter standby mode after approximately 15-20 minutes of no signal.

7.2 컨트롤 조정

• 볼륨 레벨: Start with the volume knob at its lowest setting. Play audio and gradually increase the volume until the subwoofer blends seamlessly with your main speakers without overpowering them.
• 저역 통과 필터: Adjust this knob to set the crossover frequency. A common starting point is 80Hz, but this may vary depending on your main speakers. If your receiver has a built-in crossover for the subwoofer, set the subwoofer's low-pass filter to its maximum setting (or bypass if available) and manage the crossover through the receiver.
• 위상 스위치: Experiment with both 0° and 180° settings. Choose the setting that provides the most impactful and coherent bass response at your listening position. This often involves listening to a bass-heavy track and switching between the two settings to hear which sounds fuller and more integrated.

8. 유지관리

• 청소: 서브우퍼 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 에어로졸 스프레이는 마감재나 내부 부품을 손상시킬 수 있으므로 사용하지 마십시오.
• 통풍: 과열을 방지하기 위해 환기구에 먼지와 이물질이 없는지 주기적으로 점검하십시오.
• 케이블 연결: Ensure all cables are securely connected. Loose connections can lead to poor sound quality or intermittent operation.
• 저장: If storing the subwoofer for an extended period, disconnect it from power and store it in a cool, dry place.

9. 문제 해결

If you encounter issues with your Monoprice SSW-8 subwoofer, refer to the following common problems and solutions:

• 소리 없음:
  • Ensure the subwoofer is plugged into a working power outlet and the 전원 모드 스위치가 로 설정되었습니다. ON or 자동차.
  • Check all audio connections (RCA or speaker level) are secure and correctly connected to your receiver/amp리퍼.
  • 확인해주세요 볼륨 레벨 on the subwoofer is not set to minimum.
  • Confirm that your receiver/amplifier's subwoofer output is enabled and its volume is not muted or set too low.
• 왜곡되거나 불분명한 저음:
  • 감소하다 볼륨 레벨 서브우퍼에.
  • 조정하다 저역 통과 필터 to find the optimal blend with your main speakers.
  • 실험해 보세요 위상 스위치 (0° or 180°) to improve bass coherence.
  • Check for proper placement; moving the subwoofer slightly can sometimes resolve issues.
• 윙윙거리는 소리 또는 윙윙거리는 소음:
  • 모든 케이블이 단단히 연결되어 있는지 확인하십시오.
  • 서브우퍼를 다른 전기 콘센트에 꽂아보세요. 다른 회로에 꽂는 게 좋습니다.
  • RCA 연결을 사용하는 경우 다른 RCA 케이블을 사용해 보세요.
  • Disconnect all audio inputs to the subwoofer. If the hum stops, the issue is likely with the source equipment or cabling.
• Subwoofer Does Not Turn On in AUTO Mode:
  • Increase the output level of your receiver's subwoofer channel. The auto-sensing feature requires a sufficient input signal to activate.
  • 확인하십시오 전원 모드 switch is firmly set to 자동차.

10. 사양

The following are the technical specifications for the Monoprice SSW-8 Slim Powered Subwoofer:

그림 4: 서브우퍼 크기.

11. 공식 제품 영상

끝까지 이 비디오를 시청하세요view of the Monoprice SSW-8 Slim Powered Subwoofer's features and performance.

12. 보증 및 지원

12.1 보증 정보

Monoprice stands behind its products with a 1-year Replacement Warranty. 본 보증은 정상적인 사용 환경에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주십시오.

12.2 고객 지원

For technical assistance, troubleshooting, or warranty inquiries, please contact Monoprice Customer Support through their official web사이트 또는 구매 문서에 제공된 연락처 정보를 참조하세요.