DÖRR Snapshot Extra Black 12.0I HD 실외 박스 사용 설명서

소개

The DÖRR Snapshot Extra Black 12.0I HD Outdoor Box is a robust and versatile trail camera designed for outdoor surveillance and wildlife observation. Featuring a motion sensor and night vision capabilities, it captures high-definition photos and videos in various environmental conditions. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your camera to ensure optimal performance.

이미지: 앞면 view of the DÖRR Snapshot Extra Black 12.0I HD Outdoor Box, showcasing its camouflage pattern and lens array.

설정

1. 배터리 및 SD 카드 설치

Open the camera housing to access the battery compartment and SD card slot.

• Insert 8x AA batteries (not included) into the designated slots, ensuring correct polarity (+/-).
• Insert a compatible SD card (up to 32GB, Class 10 recommended, not included) into the SD card slot until it clicks into place.

이미지: 내부 view of the camera, displaying the battery compartment on the right and the control panel with screen and buttons on the left.

2. 초기 전원 켜기 및 기본 설정

After installing batteries and SD card, switch the camera to the "SETUP" position using the switch located inside the housing. The display will turn on.

• Navigate the menu using the directional buttons (UP, DOWN, LEFT, RIGHT) and confirm selections with the "OK" button.
• 현재 날짜와 시간을 설정합니다.
• Format the SD card (this will erase all data on the card).

3. 카메라 장착

The camera can be mounted using the included strap or a security box (sold separately).

• 나무나 기둥처럼 시야가 트인 안정적인 장소를 선택하세요. view 원하는 모니터링 영역.
• Secure the camera firmly to prevent movement from wind or animals.
• For added security, consider using a metal security box and a padlock.

Image: The camera securely mounted on a tree, enclosed within a protective metal security box and secured with a combination padlock.

이미지: 클로즈업 view of the camera mounted on a tree, showing its camouflage blending with the bark.

운영

1. 메뉴 탐색 및 설정

In "SETUP" mode, use the control panel to configure camera settings.

• 방법: 사진 모드, 동영상 모드 또는 사진+동영상 모드 중에서 선택하세요.
• 해결: Adjust image and video resolution settings.
• PIR 감도 : Set the sensitivity of the motion sensor (Low, Medium, High) based on the environment and desired detection range.
• 트리거 간격: Define the delay between consecutive triggers.
• 타임 랩스: Enable time-lapse photography for long-term monitoring.
• 야간 투시경: The camera automatically switches to infrared night vision in low light conditions.

2. Activating Surveillance Mode

Once all settings are configured, switch the camera from "SETUP" to "ON" position. The camera will enter surveillance mode, indicated by a brief LED flash (if enabled) before the screen turns off. The camera is now ready to capture images or videos when motion is detected.

3. View캡처된 미디어

에게 view captured photos and videos, switch the camera back to "SETUP" mode. Use the "MENU" button to access the playback option. You can browse through file탐색 버튼을 사용합니다.

유지

1. 청소

• Gently wipe the camera lens and PIR sensor window with a soft, lint-free cloth to remove dust, dirt, or moisture.
• 카메라 하우징을 청소하세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.

2. 배터리 관리

• Check battery levels regularly via the camera's display.
• Replace all batteries simultaneously when they are low to ensure consistent power.
• 장기간 카메라를 사용하지 않을 경우 배터리 누출을 방지하기 위해 배터리를 제거하세요.

3. SD 카드 관리

• Regularly transfer captured media to a computer and format the SD card in the camera to maintain optimal performance and prevent data corruption.
• Ensure the SD card is properly inserted and removed to avoid damage.

Image: The camera positioned on a moss-covered log in a natural outdoor setting, demonstrating its intended use environment.

문제 해결

명세서

안전 정보

• 카메라를 극한 온도나 직사광선에 장시간 노출시키지 마십시오.
• 카메라를 강한 자기장에서 멀리 두세요.
• 카메라를 분해하거나 개조하지 마십시오. 보증이 무효화되고 손상이 발생할 수 있습니다.
• 배터리와 전자 부품은 현지 규정에 따라 책임감 있게 폐기하세요.