소개
This manual provides essential information for the setup, operation, and maintenance of your Jamo Studio Series S 807 Floorstanding Speakers. Designed for high-fidelity audio reproduction, these speakers feature advanced acoustic technology and are ready for Dolby Atmos integration. Please read this manual thoroughly before use to ensure optimal performance and longevity of your speakers.
상자 안에 무엇이 들어있나요?
포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.
- Jamo Studio Series S 807 Floorstanding Speakers (Pair)
- 사용 설명서 (본 문서)
- Stabilizer feet and mounting hardware
If any items are missing or damaged, please contact Jamo customer support.
설정
1. Attaching Stabilizer Feet
The S 807 speakers include stabilizer feet to enhance stability and acoustic performance. Carefully lay the speaker on its side on a soft, clean surface to avoid scratching the cabinet. Attach the four stabilizer feet to the bottom of each speaker using the provided screws. Ensure they are securely fastened. Note: Some users have reported difficulty with screw insertion; apply gentle, even pressure. Do not overtighten.
Image: Jamo S 807 speakers with grilles and stabilizer feet attached.
2. 스피커 배치
For optimal sound, place the floorstanding speakers on a firm, level surface. Position them equidistant from your primary listening position, forming an equilateral triangle. Experiment with the distance from walls to fine-tune bass response and soundstage. The front-firing tube port allows for greater flexibility in placement compared to rear-ported designs.
Image: Jamo S 807 speakers without grilles, showing the tweeter and woofers.
3. 연결 Amp리시버/리시버
The S 807 speakers feature dual binding posts for main audio input and additional terminals for Dolby Atmos height modules (if used). Use high-quality speaker wire to connect the speakers to your amplifier or receiver. Ensure correct polarity: connect the positive (+) terminal on the speaker to the positive (+) terminal on the amp스피커의 음극(-) 단자를 리파이어의 음극(-) 단자에 연결하세요. amp리퍼.
- 주요 입력: 연결하세요 amplifier's main left/right output to the "MAIN" terminals on the back of each speaker.
- Dolby Atmos Integration: The S 807 is designed for seamless integration with Jamo S 8 ATM Dolby Atmos elevation speakers. These modules connect directly to the "HEIGHT" terminals atop the S 807 cabinet, with wiring routed internally to the main speaker's rear terminals, avoiding visible wires.
Image: Rear panel of the Jamo S 807 speaker, illustrating connection terminals.
작동 지침
Once properly connected, your Jamo S 807 speakers are ready for use. Ensure your amplifier/receiver is powered on and set to the correct input source. Start with a low volume level and gradually increase it to your desired listening level.
- 볼륨 조절: 볼륨을 조절하려면 다음을 사용하세요. amplifier or receiver's controls.
- 소스 선택: Select your audio source (e.g., CD player, streaming device, TV) via your amp리퍼.
- Dolby Atmos (Optional): If using S 8 ATM modules, ensure your receiver is configured for Dolby Atmos and the height channels are properly calibrated.
The integrated WaveGuide acoustic technology focuses high-frequency sound, providing clear and dynamic audio reproduction. The dual 5-inch polyfiber woofers deliver balanced low-end frequencies.
유지
To maintain the appearance and performance of your Jamo S 807 speakers, follow these guidelines:
- 청소: Dust the speaker cabinets with a soft, dry cloth. For stubborn marks, lightly damp물에 적신 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
- 그릴 : The fabric grilles can be gently removed for cleaning or for a different aesthetic. Handle them carefully to avoid damage.
- 환경: 스피커를 직사광선이 비치는 곳, 열원 근처 또는 습도가 높은 곳에 두지 마십시오.
- 운전자 보호: Avoid touching the speaker drivers (tweeter and woofers) directly, as this can cause damage.
문제 해결
If you encounter issues with your speakers, consult the following table:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않음 |
|
|
| 왜곡되거나 불분명한 소리 |
|
|
| 불균형한 음향 밸런스 |
|
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 자모 |
| 모델명 | 슈 807 |
| 스피커 유형 | 플로어 스탠딩 |
| 색상 | 하얀색 |
| 재료 | Metal (components), Wood (cabinet) |
| 특징 | Dolby Atmos Ready, WaveGuide Acoustic Technology |
| 호환 장치 | 스마트폰, 태블릿, MP3 플레이어, 데스크탑, 텔레비전, 프로젝터, 노트북 |
| 스피커 크기 | 5인치 (우퍼) |
| 우퍼 직경 | 5 Inches (102mm) Polyfiber |
| 트위터 직경 | 25 Millimeters (1 Inch) Soft Dome |
| 스피커 최대 출력 전력 | 100 와트 |
| 연결 기술 | XLR (Binding Posts) |
| 오디오 출력 모드 | Dolby Atmos (with optional S 8 ATM module) |
| 장착 유형 | 플로어 마운트 |
| 품목 무게 | 49.9파운드(한 쌍당) |
| 패키지 크기 | 45.7 x 31.1 x 11.41 인치 |
| 한국어: | 008634002926 |
보증 정보
The Jamo Studio Series S 807 Floorstanding Speakers come with a 전체 보증. For specific terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or visit the official Jamo web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
지원하다
For further assistance, technical support, or to explore other Jamo products, please visit the official Jamo web사이트 또는 고객 서비스 부서에 문의하십시오.
또한 방문할 수 있습니다 Jamo Store on Amazon 제품 정보 및 액세서리에 대한 정보는 여기에서 확인하세요.