QSC CP8 8인치 컴팩트 액티브 스피커 사용 설명서

1. 서론

The QSC CP8 8-Inch Compact Powered Loudspeaker is designed for high performance, superior quality, and lasting reliability. This ultra-compact and highly portable loudspeaker features a 1000-Watt peak power Class-D amplifier module, matching transducers, and advanced DSP for exceptional sound quality. It is suitable for various applications including main PA, stag모니터 또는 계측기 amp합리화.

2. 주요 특징

• Compact and powerful performance; Light weight and highly portable.
• 1000 Watt peak power Class-D amp리퍼 모듈.
• Easily selected contours for commonly-used applications.
• 고급 DSP와 내장형 보정 기능으로 탁월한 음질과 스피커 보호 기능을 제공합니다.
• 전체 커버리지 영역에서 일관된 주파수 응답을 제공하는 지향성 일치 전환(DMT) 기술입니다.
• Professional appearance looks great in any application.
• Use for main PA, stag모니터 또는 계측기 amplifier with the option to elevate the speaker via the 35 mm pole socket.

3. 설정

Before operating your QSC CP8 loudspeaker, ensure it is placed on a stable surface or mounted securely. The speaker can be used in various orientations: floor standing, as a stage monitor, or mounted on a speaker pole.

그림 1: 전면 view QSC CP8 스피커의 특징을 보여줍니다.asin컴팩트한 디자인과 보호 그릴이 특징입니다.

Figure 2: Rear panel of the QSC CP8 loudspeaker, detailing the input/output connections, gain controls, and DSP contour settings.

3.1 전원 연결

1. 후면 패널의 전원 스위치가 'OFF' 위치에 있는지 확인하세요.
2. Connect the provided power cord to the AC inlet on the rear panel.
3. 전원 코드의 다른 쪽 끝을 적합한 AC 전원 콘센트에 연결하십시오.

3.2 오디오 연결

1. Connect your audio source (mixer, microphone, instrument, etc.) to the 'MIC/LINE' or 'LINE' input jacks on the rear panel.
2. Use the 'MIX OUT' XLR connector to send a mixed signal to another CP8 loudspeaker or a subwoofer.

4. 사용 설명서

4.1 전원 켜기/끄기

1. To power on, flip the power switch on the rear panel to the 'ON' position. The power LED on the front of the speaker will illuminate.
2. 전원을 끄려면 전원 스위치를 'OFF' 위치로 돌리십시오.

4.2 Adjusting Volume and Gain

• Use the 'GAIN A+B' and 'GAIN C' knobs on the rear panel to adjust the input level for each channel. Start with the gain set low and gradually increase it to avoid distortion.
• The 'LIMITER' LED indicates when the internal limiter is active. Reduce the input gain if this LED is frequently lit.

4.3 DSP Contours

The CP8 features selectable DSP contours to optimize sound for different applications:

• 기본: General purpose setting.
• 춤: Enhanced bass response for music playback.
• 외부 서브: 외부 서브우퍼와의 사용에 최적화되어 있습니다.
• 플로어 모니터: Reduces low-frequency build-up for stag전자 모니터링.
• 연설: 음성의 선명도를 향상시킵니다.

Select the appropriate contour using the switch on the rear panel.

4.4 블루투스 연결

The QSC CP8 supports Bluetooth for wireless audio streaming. Refer to the detailed instructions in the full user manual for pairing procedures with your device.

5. 유지관리

• 청소: Use a soft, dry cloth to clean the exterior of the loudspeaker. Avoid using abrasive cleaners or solvents.
• 저장: Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
• 손질: Always use the integrated handles when moving the loudspeaker. Avoid dropping or subjecting the unit to severe impacts.

6. 문제 해결

• 소리 없음: Check all power and audio connections. Ensure the gain controls are set appropriately and the audio source is active. Verify the correct DSP contour is selected.
• 왜곡된 소리: Reduce the input gain. If the 'LIMITER' LED is constantly lit, the input signal is too high. Check the audio source for distortion.
• 전원 문제: 전원 코드가 안전하게 연결되어 있고 전원 콘센트가 작동하는지 확인하세요.

7. 사양

8. 상자 안에 무엇이 들어있나요?

• QSC CP8 8인치 컴팩트 액티브 스피커
• 사용자 설명서
• 전원 코드

9. 보증 및 지원

The QSC CP8 8-Inch Compact Powered Loudspeaker is protected by a global 3-year warranty with product registration. For detailed warranty information, technical support, or service inquiries, please visit the official QSC web사이트 또는 고객 서비스 부서에 문의하십시오.

For additional resources and product information, please visit the QSC 스토어 아마존에서 만나보세요.