Amazon Basics 현관문 잠금장치 세트: Shelby 레버 손잡이 세트 사용 설명서

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics Front Door Lock Set. This handleset features a Shelby Lever and a single cylinder lock, designed for exterior use. It is finished in Oil Bronze and offers Grade-3 Security certified by ANSI/BHMA.

Please read these instructions thoroughly before beginning installation to ensure proper function and security.

영상: The complete Amazon Basics Front Door Lock Set, featuring the Shelby Lever handleset and single cylinder deadbolt in an Oil Bronze finish.

영상: 위에view of key features for the Amazon Basics handleset, highlighting Certified Grade-3 Security, compatibility with both left and right-handed doors (1-3/8 to 1-3/4 inches thick), and easy installation with a Phillips head screwdriver.

설정 및 설치

Before installation, ensure your door meets the compatibility requirements. This handleset is designed for doors 1-3/8 to 1-3/4 inches thick and features a 6-way adjustable latch to fit 2-3/8-inch or 2-3/4-inch backsets.

패키지 내용

Verify all components are present before starting installation.

영상: All components of the Amazon Basics Handleset, including the exterior handleset, interior lever, deadbolt, two latches, two strike plates, keys, and various screws for installation.

• Exterior Handleset with Deadbolt
• 내부 레버 어셈블리
• 데드 볼트 래치
• 스프링 래치
• 스트라이크 플레이트(데드볼트 및 래치용)
• 장착 나사
• 키

도어 호환성 및 치수

Ensure your door's existing bore holes and dimensions match the requirements for this handleset. Refer to the diagram below for critical measurements.

영상: Door Compatibility Guide illustrating the dimensions of the exterior handleset (12 inches total length, 2.7 inches width), deadbolt (2.4 inches width), and interior lever (4.1 inches length, 2.5 inches width). It also shows how to determine left-handed and right-handed door configurations.

영상: Detailed diagram for door preparation, indicating measurements for backset (2-3/8 or 2-3/4 inches), distance between bore holes (5 inches), hole diameter (2-1/8 inches), and door thickness (1-3/8 to 2 inches).

설치 단계

1. 문 준비: If installing on a new door, drill holes according to the provided template and dimensions. For replacement, ensure existing holes match.
2. Install Latches: Insert the deadbolt latch and the spring latch into the door edge. Ensure the bevel of the latch faces the door frame. Secure with screws.
3. 외부 손잡이 세트를 설치하세요: Place the exterior handleset through the lower bore hole, aligning the spindle with the spring latch.
4. 내부 레버 설치: Attach the interior lever assembly, ensuring the spindle engages correctly with the spring latch. Secure with mounting screws.
5. Install Deadbolt Cylinder: Insert the exterior deadbolt cylinder into the upper bore hole.
6. Install Interior Deadbolt Thumbturn: Attach the interior deadbolt thumbturn assembly, ensuring the tailpiece engages with the deadbolt mechanism. Secure with screws.
7. Adjust Latch (if necessary): The 6-way adjustable latch can be configured for 2-3/8-inch or 2-3/4-inch backsets. Follow instructions on the latch mechanism to adjust.
8. 테스트 작업: Close the door and test the deadbolt and lever functions with the key and thumbturn from both sides to ensure smooth operation.

A Phillips head screwdriver (not included) is required for installation.

작업

This handleset provides secure entry and exit for your front door.

문 잠그기

• 외부에서: Insert the key into the deadbolt cylinder and turn to extend the deadbolt. Remove the key. The handleset lever can be locked by pressing the button on the interior side before closing the door, or by using the key from the exterior.
• 인테리어에서: Rotate the thumbturn on the deadbolt to extend the deadbolt. The interior lever can be locked by pressing the button on the lever assembly.

문 잠금 해제

• 외부에서: Insert the key into the deadbolt cylinder and turn to retract the deadbolt. Turn the Shelby lever to open the door.
• 인테리어에서: Rotate the thumbturn on the deadbolt to retract the deadbolt. Press down on the Shelby lever to open the door.

영상: The Amazon Basics Handleset in Oil Bronze, installed on the exterior of a door, demonstrating its appearance and functionality.

영상: 내부 view of the Amazon Basics Handleset, showing the thumbturn for the deadbolt and the Shelby lever for the latch, installed on a door.

유지

Regular maintenance helps ensure the longevity and smooth operation of your door lock set.

• 청소: 외부 마감재를 부드러운 천으로 닦으십시오.amp 천으로 닦으세요. 연마성 세제, 용제 또는 강한 화학 물질은 마감재를 손상시킬 수 있으므로 피하세요.
• 매끄럽게 하기: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and the latch mechanisms to maintain smooth operation. Do not use oil-based lubricants as they can attract dirt.
• 나사를 조이세요: Check all mounting screws periodically and tighten them if they have become loose. Do not overtighten.
• 마모 검사: Regularly inspect the handleset for any signs of wear or damage. Address any issues promptly to prevent further problems.

문제 해결

If you encounter issues with your handleset, refer to the following common solutions:

If these solutions do not resolve the issue, contact customer support.

명세서

• 상표: 아마존 기본 정보
• 모델 번호: ZIQ53910
• 색상: 오일 브론즈
• 외부 마감 : 청동
• Product Dimensions (Handleset): 15.66인치(L) x 2.67인치(W)
• 도어 두께 호환성: 1-3/8 ~ 1-3/4인치
• 백셋 호환성: 2-3/8 inches or 2-3/4 inches (adjustable)
• 잠금 유형: Single Cylinder Key Lock
• 보안 등급: Certified Grade-3 by ANSI/BHMA
• 손의 방향: Universal (reversible lever)
• 포함된 구성 요소: 걸쇠, 스트라이크, 나사 세트
• 품목 무게: 3.67파운드(1.67킬로그램)
• 한국어: 193598101119

보증 정보

Specific warranty details for the Amazon Basics Front Door Lock Set are typically included with the product packaging or available on the official Amazon Basics web사이트. 자세한 보증 약관은 다음 자료를 참조하세요.

고객 지원

추가적인 도움이나 기술 지원, 또는 교체 부품에 대한 문의는 공식 웹사이트를 방문해 주십시오. 아마존 베이직스 스토어 또는 아마존 고객 서비스에 문의하세요.