ASUS ROG Maximus XI Hero Motherboard User Manual

1. 제품 오버view

The ASUS ROG Maximus XI Hero is a high-performance motherboard designed for 9th and 8th Generation Intel Core processors. It is engineered to maximize connectivity and speed, featuring Dual M.2 slots, USB 3.1 Gen 2, and ASUS Opti-MEM II for enhanced DRAM overclocking stability.

Key features include a revamped 5-Way Optimization system that intelligently overclocks based on smart prediction and thermal telemetry, alongside FanXpert 4 for dynamic system cooling. The motherboard also integrates Aura Sync RGB lighting with addressable headers, offering extensive color customization and synchronization with other AURA Sync enabled products.

Figure 1.1: The ASUS ROG Maximus XI Hero motherboard, showcasing its design and integrated RGB lighting elements.

패키지 내용

Upon unboxing your ROG Maximus XI Hero motherboard, verify that all components listed below are present:

• ROG MAXIMUS XI HERO gaming motherboard
• 사용자 가이드
• ROG motherboard support DVD
• 2-in-1 SATA 6Gb/s 케이블 (2)
• Extension Cable for RGB strips
• Extension Cable for RGB Addressable strips (2 included)
• SLI™ HB bridge (2-way-M)
• Q-커넥터
• ROG 코스터
• M.2 screws package
• ASUS 2x2 dual band Wi-Fi antenna (Wi-Fi 802.11a/b/g/n/ac compliant)
• ROG Thank you card
• ROG 스티커
• 128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, SM BIOS 3.1, ACPI 6.1

Figure 1.2: Contents of the ASUS ROG Maximus XI Hero retail package, including the motherboard, cables, and documentation.

2. 설정 및 설치

This section provides instructions for installing your ASUS ROG Maximus XI Hero motherboard and essential components into your PC chassis.

2.1 설치 준비

• 전원 공급 장치가 벽면 콘센트에서 분리되어 있는지 확인하십시오.
• 깨끗하고 정전기가 없는 표면에서 작업하십시오. 정전기 방지 손목 스트랩을 사용하는 것도 고려해 보세요.
• 필요한 모든 부품을 준비하세요: CPU, CPU 쿨러, RAM 모듈, 저장 장치(M.2 SSD, SATA 드라이브), 그래픽 카드 및 PC 케이스.

2.2 CPU 설치 (LGA 1151 소켓)

The ROG Maximus XI Hero supports 8th and 9th Generation Intel Core processors with an LGA 1151 socket. Handle the CPU by its edges to avoid touching the gold contacts or the pins in the socket.

1. 마더보드에서 CPU 소켓을 찾습니다.
2. 로드 레버를 부드럽게 아래로 누른 다음 옆으로 당겨 소켓 고정 프레임을 엽니다.
3. CPU의 삼각형 표시를 소켓의 해당 표시와 일치시키세요. CPU를 소켓에 조심스럽게 넣으세요. 무리하게 힘을 주지 마세요.
4. 고정 프레임을 닫고 하중 레버를 딸깍 소리가 날 때까지 제자리로 밀어 넣으십시오.

그림 2.1: 클로즈업 view of the LGA 1151 CPU socket on the motherboard, ready for processor installation.

메모: One user reported receiving a board with bent pins in the CPU socket. Always inspect the socket carefully before installing the CPU. If bent pins are observed, contact your retailer or ASUS support immediately.

2.3 RAM 설치 (DDR4)

The motherboard features four DDR4 DIMM slots, supporting up to 64GB of RAM with speeds up to 4400 MHz (OC). For optimal performance, install RAM modules in matched pairs (dual-channel configuration) as indicated in the user guide.

1. DIMM 슬롯의 양쪽 끝에 있는 클립을 엽니다.
2. RAM 모듈의 홈을 DIMM 슬롯의 키에 맞춥니다.
3. 클립이 제자리에 고정될 때까지 RAM 모듈의 양쪽 끝을 단단히 누릅니다.

2.4 M.2 SSD 설치

The ROG Maximus XI Hero includes Dual M.2 slots for high-speed NVMe SSDs, featuring M.2 heatsinks to maintain optimal drive temperatures.

1. Locate the M.2 slots, often covered by heatsinks. Remove the heatsink screw and lift the heatsink.
2. M.2 SSD를 약간 기울여 슬롯에 삽입합니다.
3. SSD를 살살 눌러 넣은 후 제공된 M.2 나사로 고정하십시오.
4. Reattach the M.2 heatsink and secure its screw.

2.5 Motherboard Installation into Chassis

The pre-mounted I/O shield simplifies installation. Ensure your case has the correct standoffs installed for an ATX motherboard.

1. PC 케이스의 스탠드오프에 마더보드를 조심스럽게 정렬하세요.
2. Ensure the I/O shield aligns with the cutouts in the case.
3. Secure the motherboard with screws, typically nine, ensuring not to overtighten.

2.6 주변 장치 및 전원 연결

필요한 모든 케이블을 연결하세요.

• ATX 전원 커넥터: Connect the 24-pin main power connector and the 8-pin (or 4+4-pin) CPU power connector from your power supply to the motherboard.
• 전면 패널 커넥터: Use the Q-Connector to simplify connecting the power button, reset button, HDD LED, and power LED from your case to the motherboard's front panel header.
• USB 헤더: Connect front panel USB 2.0 and USB 3.0/3.1 headers.
• SATA 장치: 저장 장치의 SATA 데이터 케이블을 마더보드의 SATA 포트에 연결하십시오.
• 케이스 팬: Connect case fans to the FanXpert 4 controlled fan headers.
• 그래픽 카드: Install your graphics card into the primary PCIe x16 slot and connect any necessary PCIe power cables from your power supply.

Figure 2.2: The rear I/O panel of the motherboard, showing various ports including USB, HDMI, and audio jacks.

3. 마더보드 작동

Once your system is assembled, you can proceed with initial power-on, BIOS configuration, and operating system installation.

3.1 첫 번째 부팅 및 BIOS 설정

1. 모니터, 키보드, 마우스를 연결하세요.
2. Connect the power cable to your power supply and turn on the power supply switch.
3. PC 케이스의 전원 버튼을 누르세요.
4. POST(전원 켜짐 자체 테스트) 중에 버튼을 반복해서 누르십시오. 델 키 또는 F2 key to enter the UEFI BIOS Utility.
5. In the BIOS, you can configure boot order, enable XMP for RAM, adjust fan curves via FanXpert 4, and perform initial system checks.
6. 변경 사항을 저장하고 BIOS를 종료한 후 운영 체제 설치를 계속하십시오.

The BIOS is designed to be user-friendly and offers extensive options for system tuning and monitoring.

3.2 드라이버 및 소프트웨어 설치

After installing your operating system (e.g., Windows 10), install the necessary drivers for optimal performance and stability. The ROG Maximus XI Hero comes with a support DVD, but it is recommended to download the latest drivers and utilities from the official ASUS support web대지.

• 칩셋 드라이버: 구성 요소 간의 원활한 통신에 필수적입니다.
• 오디오 드라이버: For the SupremeFX S1220A codec.
• LAN/Wi-Fi Drivers: 네트워크 연결을 위해.
• Intel Management Engine Interface (MEI) Driver.
• ASUS 유틸리티:
  • 무기고 상자: A software suite for system monitoring, driver updates, and Aura Sync control.
  • ASUS AI Suite 3 (5-Way Optimization, FanXpert 4): For intelligent overclocking, power saving, and advanced fan control.
  • 오라 동기화: For customizing the integrated RGB lighting and synchronizing it with other compatible devices.

팁: The motherboard may prompt you to install Armoury Crate directly after the first boot into the OS, which can streamline driver and utility installation.

3.3 Overclocking and Performance Tuning

The ROG Maximus XI Hero is designed for enthusiasts and offers robust overclocking capabilities:

• 5방향 최적화: This intelligent feature automatically overclocks your system based on your specific hardware and cooling, providing a balanced performance boost.
• ASUS Opti-MEM II: Enhances DRAM overclocking stability, allowing for higher memory frequencies.
• UEFI BIOS: Provides granular control over CPU voltage, frequency, memory timings, and fan curves for manual tuning.

4. 유지관리

정기적인 유지관리는 마더보드와 PC 시스템의 수명과 최적의 성능을 보장하는 데 도움이 됩니다.

4.1 먼지 청소

Dust accumulation can lead to overheating and component degradation. It is recommended to clean your PC interior every 3-6 months, depending on your environment.

• Disconnect power from the PC.
• Open the side panel of your PC case.
• Use compressed air to blow dust out of the motherboard, CPU cooler, GPU, and case fans. Hold fans in place to prevent over-spinning.
• For stubborn dust, use a soft brush or microfiber cloth.

4.2 BIOS 업데이트

ASUS periodically releases BIOS updates to improve stability, add support for new hardware, or fix bugs. Always exercise caution when updating the BIOS.

• 공식 ASUS 지원을 방문하세요 website for the ROG Maximus XI Hero to download the latest BIOS version.
• Follow the instructions provided by ASUS for updating the BIOS, typically via USB Flashback or the EZ Flash utility within the BIOS.
• 메모: Some users have reported better stability with specific older BIOS versions (e.g., 0602) for certain overclocking scenarios. Research community feedback if you encounter issues with the latest BIOS and consider older stable versions if necessary, but generally, the latest is recommended.

4.3 드라이버 업데이트

Keep your drivers updated to ensure compatibility, performance improvements, and security patches. Use Armoury Crate or manually download from the ASUS support web대지.

5. 문제 해결 가이드

This section addresses common issues you might encounter with your ROG Maximus XI Hero motherboard.

5.1 전원 없음/POST 없음(Power-On Self-Test)

• 전원 연결 확인: Ensure the 24-pin ATX power connector and the 8-pin CPU power connector are securely seated on the motherboard. Verify the power supply is switched on and connected to a working outlet.
• CMOS 지우기: If the system fails to boot after hardware changes or overclocking, try clearing the CMOS. Refer to your motherboard's physical user manual for the exact location of the CLRTC jumper or button.
• 구성 요소 재장착: Remove and re-install the CPU, RAM modules, and graphics card to ensure they are properly seated.
• Minimum Boot Configuration: Disconnect all non-essential peripherals and components (e.g., extra storage drives, PCIe cards) and attempt to boot with only the CPU, one RAM stick, and the graphics card (if no integrated graphics).

5.2 시스템 불안정성/충돌

• Check RAM: Ensure RAM modules are installed in the correct slots for dual-channel operation. Test with one RAM stick at a time to identify a faulty module. Disable XMP/DOCP profiles if enabled.
• Overclocking Issues: If you have overclocked your CPU or RAM, revert to default settings in the BIOS to check for stability. Gradually increase frequencies and voltages, testing stability at each step.
• 온도 모니터링: Use monitoring software (e.g., HWMonitor, ASUS AI Suite) to check CPU and motherboard temperatures. Ensure adequate cooling.
• 운전자 간 충돌: Ensure all drivers are up-to-date and compatible with your operating system. Perform a clean installation of graphics drivers if issues persist.

5.3 Bent CPU Socket Pins

While rare, damage to the CPU socket pins can occur, often during installation or due to manufacturing defects. This can lead to no boot, system instability, or recognition issues with components (e.g., RAM slots not working).

• 점검: Carefully inspect the CPU socket pins under good lighting before installing the CPU. If any pins appear bent or misaligned, do not attempt to install the CPU.
• 지원팀에 문의: If you discover bent pins upon receiving the motherboard, contact your retailer or ASUS customer support immediately for assistance or an RMA (Return Merchandise Authorization). Attempting to straighten pins yourself can void the warranty and cause further damage.

6. 기술 사양

7. 보증 정보

ASUS는 마더보드에 대해 제한적 보증을 제공합니다. 보증 조건 및 기간은 지역 및 판매점에 따라 다를 수 있습니다. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.

For detailed warranty information, including coverage, exclusions, and the claims process, please refer to the warranty card included in your product packaging or visit the official ASUS support web대지.

8. 고객 지원

For technical assistance, driver downloads, BIOS updates, or service inquiries regarding your ASUS ROG Maximus XI Hero motherboard, please contact ASUS customer support.

• ASUS 공식 지원 Web대지: 방문하다 www.asus.com/support/ for FAQs, troubleshooting guides, driver downloads, and contact options.
• 제품 페이지 : Specific information for the ROG Maximus XI Hero can be found on its dedicated product page on the ASUS web대지.
• 온라인 리소스: Many community forums and online resources exist for ASUS ROG products, which can be helpful for general questions and user experiences.

You can also visit the official ASUS Store on Amazon for product information and related accessories: ASUS 스토어.