1. 서론
The HTZSAFE Wireless Door/Window Magnetic Sensor Alarm system is designed to provide security alerts for your home or business. This system includes one wireless door/window sensor and one plug-in receiver. It features a long wireless transmission range, multiple melody options, and adjustable volume levels. This manual provides instructions for proper installation, operation, and maintenance of your alarm system.
2. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x HTZSAFE Wireless Door/Window Sensor
- 1 x HTZSAFE Plug-in Receiver
- Mounting accessories (double-sided adhesive tape, screws)
- 사용 설명서 (본 문서)
3. 제품 구성품
Familiarize yourself with the main components of the HTZSAFE Wireless Door/Window Magnetic Sensor Alarm system:
이미지 3.1: Diagram illustrating the Plug-in Alarm Receiver and Wireless Door/Window Sensor components and their dimensions. The receiver features a power plug, volume buttons, melody selection, and an indicator light. The sensor consists of a main body with an indicator light and a separate magnet.
3.1. Plug-in Receiver
- 전원 플러그: Connects to a standard electrical outlet.
- 볼륨 버튼: Adjust the alarm volume (4 levels).
- Melody Button: Cycles through 35 available melodies.
- 표시등: Illuminates when an alert is received.
- 스피커: Emits the selected melody.
3.2. Wireless Door/Window Sensor
- 센서 본체: The main unit containing the wireless transmitter and internal components.
- 자석 : A smaller component that triggers the sensor when separated from the sensor body.
- 표시등: Flashes when the sensor is triggered or transmitting a signal.
4. 설정 및 설치
The HTZSAFE system is designed for easy setup. The sensor and receiver are pre-programmed at the factory. Follow these steps for installation:
4.1. Install the Wireless Door/Window Sensor
- Identify a suitable location on your door or window frame. The sensor body and magnet should be mounted on the same plane, with a maximum gap of 8mm when the door/window is closed.
- Clean the surface thoroughly where the sensor and magnet will be attached.
- Peel the backing from the double-sided adhesive tape and firmly press the sensor body onto the door/window frame.
- Mount the magnet directly adjacent to the sensor body on the moving part of the door/window, ensuring the alignment marks on both parts face each other. The gap between the sensor body and magnet should not exceed 8mm when the door/window is closed.
- Test the installation by opening and closing the door/window. The sensor's indicator light should flash, and the receiver should sound an alarm.
이미지 4.1: Example of the wireless door/window sensor installed on a door frame. The sensor (larger part) is on the frame, and the magnet (smaller part) is on the door itself. When the door opens, the magnet separates from the sensor, triggering an alert.
4.2. 수신기를 연결하세요
- Select a standard electrical outlet in a central location within your property, ideally within 600 feet of the sensor.
- Plug the receiver into the chosen outlet. The receiver will power on and be ready to receive signals from the sensor.
이미지 4.2: Visual representation of the wireless transmission range, demonstrating the ability of the signal to pass through doors, walls, and floors up to 600 feet, ensuring coverage throughout a typical home or business.
5. 사용 설명서
5.1. 볼륨 조절
The receiver has 4 adjustable volume levels. Press the 용량 button on the side of the receiver to cycle through the volume settings until you reach your desired level.
5.2. 멜로디 변경
The receiver offers 35 classic melodies. Press the 멜로디 button on the side of the receiver to cycle through the available tunes. You can select a different melody for each sensor if you expand your system.
5.3. 시스템 운영
When the door or window where the sensor is installed opens, the magnet separates from the sensor body. This triggers the sensor to send a wireless signal to the plug-in receiver. The receiver will then sound the selected melody and its indicator light will flash, alerting you to the open entry point.
5.4. 시스템 확장
The HTZSAFE system is fully expandable. You can add up to 32 additional sensors (including other HTZSAFE solar wireless driveway alarm sensors) and an unlimited number of receivers for comprehensive coverage. Refer to the specific instructions provided with additional sensors for pairing procedures, if required.
6. 유지관리
6.1. 청소
Wipe the sensor and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the device surfaces.
6.2. Battery Replacement (Sensor)
The wireless sensor is typically powered by a coin cell battery. When the sensor's indicator light no longer flashes or the transmission range decreases significantly, it may be time to replace the battery. To replace:
- 센서 c를 조심스럽게 여세요asing.
- 오래된 배터리를 제거하세요.
- 올바른 극성에 맞춰 새 배터리를 삽입하세요.
- 센서 c를 닫으세요asing 안전하게.
- Test the sensor to ensure proper operation.
참고: 사용한 배터리는 현지 규정에 따라 책임감 있게 폐기하십시오.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Receiver does not sound alarm when sensor is triggered. |
|
|
| 거짓 경보. |
|
|
| 무선 범위가 짧음. |
|
|
8. 사양
- 모델: B07HJ66PP2
- 상표: HZSAFE
- 무선 전송 범위: Up to 600 feet (actual range may vary)
- 멜로디: 35가지 선택 가능한 옵션
- 볼륨 레벨: 4 단계 조절 가능
- Sensor Gap Tolerance: Up to 8mm between sensor body and magnet
- 확장 성 : Supports up to 32 sensors and unlimited receivers
- 호환 장치: HTZSAFE Solar Wireless Driveway Alarm Systems, HTZSAFE Wireless Sensors
- 장착 유형: Window Mount or Door Mount
- 제어 방법: Touch (on receiver)
- 센서 기술: 자기 센서
- 품목 무게: 0.18 Kilograms (for the kit)
- 한국어: 605244295399
9. 보증 및 지원
9.1. 보증 정보
HTZSAFE provides a 2년 보증 이 제품에 대한 추가 정보. 90-day risk-free offer is available. Please retain your proof of purchase for warranty claims.
9.2. 고객 지원
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact HTZSAFE customer support. Refer to the product packaging or the official HTZSAFE web최신 연락처 정보는 사이트에서 확인하세요.