Acme Jason II Wooden Twin Storage Loft Bed

소개

Thank you for choosing the Acme Jason II Wooden Twin Storage Loft Bed. This manual provides essential information for the safe assembly, proper use, and maintenance of your new loft bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This loft bed is designed to maximize space, featuring a twin-sized sleeping area, an integrated workstation with a desk and corkboard, a right-facing ladder with five drawers, and a chest with four drawers and two open compartments. It is constructed from durable wood with a grey finish.

안전 정보

경고: 이러한 경고 및 지침을 따르지 않을 경우 심각한 부상이나 사망을 초래할 수 있습니다.

• Always ensure the bed is assembled correctly and all fasteners are tightened securely before use. Periodically check and tighten all fasteners.
• 위층 침대는 6세 미만 어린이에게는 적합하지 않습니다.
• Use only a mattress that is 74-75 inches long and 37.5-38.5 inches wide on the top bunk. The maximum mattress thickness should not exceed 6 inches.
• Always use the ladder for entering and exiting the top bunk. Do not use the bed as a play structure.
• Ensure the full-length guard rail is properly installed and maintained to prevent falls.
• 로프트 침대의 어떤 부분에도 침대와 함께 사용하도록 설계되지 않은 물건을 부착하거나 걸지 마십시오. 예를 들어,amp고리, 벨트, 줄넘기 등을 포함하나 이에 국한되지 않습니다.
• 조립 중에는 어린이들이 조립 장소에 접근하지 못하도록 하십시오.
• This product is heavy. Assembly requires at least two adults.

패키지 내용

Before assembly, verify that all parts listed in the assembly instructions are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

• Loft Bed Frame Components (Wood, Grey Finish)
• Ladder with 5 Drawers
• Chest with 4 Drawers and 2 Open Compartments
• Workstation Desk and Corkboard
• Full-Length Guard Rail
• Hardware Pack (screws, bolts, dowels, etc.)
• Assembly Tools (Allen wrench, screwdriver - may require additional tools not included)

설정 및 조립

Assembly of the Acme Jason II Loft Bed requires careful attention to detail and is best performed by two adults. Please follow the step-by-step diagrams and instructions provided in the separate assembly guide included with your product. Ensure you have adequate space for assembly.

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼낸 후 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
2. 하드웨어 식별: Separate and identify all hardware components using the provided hardware list.
3. 메인 프레임 조립: Begin by assembling the main bed frame structure according to the diagrams. Ensure all connections are finger-tightened initially.
4. Install Workstation: Attach the desk and corkboard components to the main frame.
5. Assemble Ladder and Chest: Construct the ladder with its integrated drawers and the separate chest unit. Note that the ladder is right-facing.
6. Attach Ladder and Chest: Securely attach the assembled ladder and chest units to the main bed frame.
7. Install Guard Rail: Mount the full-length guard rail on the top bunk for safety.
8. 최종 조임: Once all components are in place, systematically tighten all fasteners using the provided tools. Do not overtighten.
9. 안정성 확인: Gently shake the assembled bed to ensure it is stable and all parts are securely connected.

For detailed visual guidance, refer to the assembly diagrams in your product's dedicated assembly manual.

Image: Fully assembled Acme Jason II Twin Storage Loft Bed, showcasing the bed, desk, and storage units.

작동 지침

The Acme Jason II Loft Bed is designed for functional living and sleeping. Follow these guidelines for optimal use:

• 수면 공간: The top bunk is intended for a twin-sized mattress. Ensure the mattress fits snugly within the frame and below the top edge of the guard rail.
• 사다리 사용법: Always use the integrated ladder to access and exit the top bunk. Ensure hands and feet are clean and dry to prevent slipping.
• 보관 서랍: The ladder features 5 drawers, and the chest includes 4 drawers and 2 open compartments. These are designed for light storage of clothing, books, and personal items. Avoid overloading drawers to prevent damage to the French dovetail construction and safety stops.
• 워크스테이션: The integrated desk provides a surface for studying or working. The corkboard allows for pinning notes and reminders.

유지

Regular maintenance will extend the life and ensure the safety of your loft bed.

• 청소: 부드러운 d로 표면을 닦으십시오.amp 천을 사용하십시오. 목재 마감재를 손상시킬 수 있는 독한 화학 약품이나 연마성 세척제는 사용하지 마십시오.
• 패스너 점검: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and other fasteners. Tighten any that have become loose. Do not overtighten.
• 서랍 유지 관리: Ensure drawers slide smoothly. If they become stiff, check for obstructions or apply a small amount of silicone lubricant to the drawer glides.
• 목재 관리: Protect the wood from direct sunlight and extreme temperature changes to prevent warping or fading. Use coasters under drinks on the desk surface.

문제 해결

명세서

• 모델: Jason II
• 스타일: 현대의
• 크기: 트윈 로프트
• 색상: 회색
• 재료: 목재
• 치수(길이 x 너비 x 높이): 98" x 57" x 73"(248.9cm x 144.8cm x 185.4cm)
• 품목 무게: 402파운드(182.3kg)
• 지면에서 물체까지의 거리: 11 인치 (27.9cm)
• 포함된 구성 요소: Loft Bed Frame, Ladder with Drawers, Chest with Drawers and Open Compartments, Workstation Desk, Corkboard, Guard Rail.
• 필요한 조립: 예

Image: Dimensional drawing of the Acme Jason II Twin Storage Loft Bed, showing overall length, width, and height.

보증 정보

For detailed warranty information regarding your Acme Jason II Wooden Twin Storage Loft Bed, please refer to the product description on the original purchase platform or visit the official Acme Furniture store page. Warranty terms and conditions may vary.

Link to Acme Store: Acme Furniture Official Store

고객 지원

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Acme Furniture customer support through the retailer where the product was purchased. Have your model number (Jason II) and purchase date ready for faster service.

For general inquiries, you may also visit the Acme Furniture website or contact them via the information provided on their official store page.