Hobbywing QUICRUN WP 1080 Brushed Electronic Speed Controller User Manual

1. 이상view

The Hobbywing QUICRUN WP 1080 is a waterproof electronic speed controller (ESC) designed for brushed motors in 1:10 scale RC cars, particularly rock crawlers and scale trucks. It features an aluminum case for enhanced cooling and is fully waterproof for use in various weather conditions. The ESC offers 15 programmable parameters, including PWM frequency and drag brake performance, which can be adjusted using the included LED program box.

주요 특징은 다음과 같습니다.

• 100% Waterproof design.
• 15 Programmable Parameter Items for fine-tuning.
• Factory-installed XT60 Plug for battery connection.
• Automatic Throttle Calibration for ease of use.
• Powerful BEC with selectable 6V / 7.4V output at 3A.
• Supports 2-3S LiPo or 5-9S NiMh batteries.
• Included LED Program Box for convenient parameter adjustment.

이미지 1.1: The Hobbywing QUICRUN WP 1080 ESC, LED Program Box, and an example motor. The image displays the main components of the system, including the red-finned ESC unit, the black LED program card with display and buttons, an example motor (note: this ESC is designed for brushed motors), and various connecting wires and accessories.

2. 설정 및 설치

Follow these steps for proper installation and initial setup of your QUICRUN WP 1080 ESC.

2.1. 상자 안에 무엇이 들어있나요?

• QUICRUN WP 1080 Speed Controller
• LED Programming Card
• 사용 설명서
• 와이어 타이
• Double-sided Foam Tape
• 열 수축 튜빙
• 데칼 시트

2.2. 배선 연결

1. 모터 연결: Connect the ESC's motor wires to your brushed motor. The motor wires come tinned without connectors, allowing for direct soldering or custom connector installation. Ensure correct polarity if your motor requires it.
2. 배터리 연결: The ESC features a factory-installed XT60 plug. Connect your compatible 2-3S LiPo or 5-9S NiMh battery to this plug.
3. 수신기 연결: Plug the ESC's signal cable (usually black, red, white/orange) into the throttle channel (CH2) of your RC receiver.
4. 전원 스위치: Mount the power switch in an accessible location on your vehicle using the provided double-sided foam tape.

2.3. ESC 장착

Use the included double-sided foam tape to securely mount the ESC to a flat surface on your RC vehicle chassis. Ensure adequate airflow around the ESC for optimal cooling, especially during demanding operation.

2.4. Automatic Throttle Calibration

Before first use, or after changing your radio system, perform an automatic throttle calibration:

1. Turn on your transmitter and ensure the throttle trim is at neutral and throttle endpoints are at 100%.
2. 배터리를 ESC에 연결합니다.
3. Press and hold the ESC's power button, then release it when the LED flashes.
4. Set the throttle stick to the full throttle position and wait for the LED to flash.
5. Set the throttle stick to the full brake/reverse position and wait for the LED to flash.
6. Return the throttle stick to the neutral position. The ESC will emit a series of beeps, indicating successful calibration.

3. 사용 설명서

This section details how to operate your ESC and adjust its parameters using the LED Program Box.

3.1. 기본 동작

• 전원 켜기: Ensure all connections are secure. Turn on your transmitter, then press the power button on the ESC.
• 전원 끄기 : Press and hold the power button on the ESC until it turns off. Always disconnect the battery after use.
• 운전: Use your transmitter's throttle stick to control the speed and direction of your RC vehicle.

3.2. Using the LED Program Box

The included LED Program Box allows for easy adjustment of the ESC's 15 programmable parameters. Connect the program box to the ESC's programming port (usually the fan port or a dedicated port, refer to the ESC manual for exact location) when the ESC is powered on and connected to a battery.

The program box will display the current parameter and its value. Use the "ITEM" button to cycle through parameters and the "VALUE" button to change the setting for the selected parameter. Press "OK" to save changes. Refer to the detailed instructions provided with the program box for a complete list of parameters and their functions.

Commonly adjusted parameters include:

• 실행 모드 : Forward/Brake/Reverse, Forward/Brake, Forward/Reverse.
• LiPo 셀: Auto-detect or manual setting.
• 낮은 볼륨tage 컷오프 임계값: Protects your battery from over-discharge.
• 드래그 제동력: Controls the braking force applied when the throttle returns to neutral.
• 초기 제동력: Sets the minimum brake force.
• 최대 역 힘: Adjusts the maximum speed in reverse.
• 시작 모드(펀치): Controls the initial acceleration.
• PWM 주파수 : Adjusts the motor drive frequency for smoother low-speed control and reduced motor noise. Higher frequency can increase ESC temperature.
• BEC 볼륨tage: Selectable between 6.0V and 7.4V for compatibility with various servos.

4. 유지관리

Proper maintenance ensures the longevity and optimal performance of your ESC.

• 청소: Despite being waterproof, it is recommended to rinse the ESC with fresh water after use in muddy or wet conditions. Ensure it is thoroughly dried before storage or next use.
• 검사: Regularly check all wires and connectors for signs of wear, damage, or corrosion. Ensure solder joints are secure.
• 저장: Store the ESC in a clean, dry place away from direct sunlight and extreme temperatures.
• 온도 모니터링: While the ESC has thermal protection, monitor its temperature during operation, especially in demanding conditions or with high PWM frequency settings. Excessive heat can reduce lifespan.

5. 문제 해결

This section provides solutions to common issues you might encounter with your ESC.

6. 사양

Detailed technical specifications for the Hobbywing QUICRUN WP 1080 ESC.

7. 보증 및 지원

Specific warranty information for the Hobbywing QUICRUN WP 1080 ESC is not explicitly provided in the product details. For detailed warranty terms and conditions, please refer to the official Hobbywing website or contact your local Hobbywing distributor.

For technical support, product inquiries, or service, please visit the official Hobbywing website or contact their customer service department. Always provide your product model number (QUICRUN WP 1080) and part number (30112750) when seeking support.

공식적인 Web대지: www.hobbywing.com