ixaer Commercial Electric Countertop Pressure Fryer 16L Instruction Manual

중요한 안전 정보

경고: Failure to follow these safety instructions may result in fire, electric shock, serious injury, or property damage. Read all instructions before using this appliance.

• Hot Surface & Hot Oil: The fryer surfaces and oil become extremely hot during operation. Always use insulated gloves or mitts when handling hot components.
• 설명서를 꼼꼼히 읽으세요: Before initial use, read and understand the entire instruction manual.
• Oil Temperature Check: Always ensure the cooking oil temperature is above 165°C (329°F) before loading food to prevent excessive pressure buildup.
• 모니터 압력: Continuously monitor pressure buildup during operation using the integrated pressure gauge.
• Oil Fire Safety: 하지 마세요 use water to extinguish an oil fire. In case of an oil fire, immediately turn off the power, cover the fryer with a metal lid, or use a fire blanket.
• 전기 안전: Ensure the appliance is connected to a properly grounded outlet. Do not operate with a damaged cord or plug. Keep electrical components dry.
• 통풍: Operate the fryer in a well-ventilated area to dissipate heat and steam.
• 감독: Never leave the operating fryer unattended.
• 어린이와 애완동물: 제품 작동 및 냉각 중에는 어린이와 반려동물이 제품에 가까이 가지 않도록 하십시오.

제품 끝view

The ixaer Commercial Electric Countertop Pressure Fryer 16L, Model Chicken Express, is designed for efficient and consistent frying results. Constructed from durable stainless steel, it features a 16-liter oil capacity and a powerful 2400-watt heating element. Key components include a pressure-sealed lid, integrated pressure gauge, temperature control, timer, and an oil drain valve.

그림 1: 전면 view of the ixaer Commercial Electric Countertop Pressure Fryer 16L. This image shows the main unit with its stainless steel construction, control panel, and the pressure pot on top.

설정

1. 짐 풀기: Carefully remove all packaging materials. Inspect the fryer for any damage. Retain packaging for future transport if needed.
2. 놓기: Place the fryer on a stable, heat-resistant, and level surface. Ensure adequate clearance around the unit for ventilation. Do not place near flammable materials.
3. 초기 청소: Before first use, clean the interior of the frying pot and all removable components (e.g., basket, lid) with warm, soapy water. Rinse thoroughly and dry completely.
4. 전원 연결: Ensure the power switch is in the 'OFF' position. Connect the power cord to a grounded electrical outlet that matches the fryer's voltage와 왓tage requirements (2400 watts).
5. 오일 주입: Open the lid and carefully pour cooking oil into the frying pot. Do not exceed the maximum fill line indicated inside the pot. The fryer has a 16-liter oil capacity.

Figure 2: Close-up of the control panel and oil drain valve. This image highlights the temperature and timer dials, indicator lights, and the oil drain lever and spout.

작동 지침

1. Preheating Oil: Close the lid securely. Turn the power switch to 'ON'. Set the desired cooking temperature using the temperature control dial (e.g., 170°C for chicken). The indicator light will illuminate, showing the unit is heating.
2. 온도 확인: Wait for the oil to reach the set temperature. The indicator light will turn off when the temperature is reached. Verify the oil temperature is above 165°C (329°F) before proceeding.
3. 음식 적재: Carefully open the lid. Place the food (e.g., chicken pieces) into the frying basket. Lower the basket into the hot oil. Do not overload the basket.
4. Pressure Frying: Securely close and lock the lid. Set the cooking time using the timer dial. The fryer will begin to build pressure. Monitor the pressure gauge to ensure it operates within safe limits.
5. 압력 해제: Once the cooking time is complete, the fryer will automatically turn off. Before opening the lid, ensure all pressure has been safely released. Use the pressure release valve if necessary, following safety guidelines.
6. 음식 제거: Once pressure is fully released, carefully unlock and open the lid. Lift the frying basket to drain excess oil. Transfer the cooked food to a holding area.
7. 오일 배출: After the oil has cooled sufficiently (but is still warm enough to flow), position a heat-resistant container under the oil drain spout. Open the oil drain lock lever to release the oil. Close the lever once draining is complete.

Figure 3: Detail of the pressure fryer lid, showing the locking mechanism and the integrated pressure gauge for monitoring internal pressure.

유지

매일 청소

• After each use, allow the fryer and oil to cool completely.
• 오일을 적절한 용기에 옮겨 담습니다.
• Remove the frying basket and lid. Wash them with warm, soapy water, rinse, and dry.
• Wipe down the interior of the frying pot with a soft cloth and warm, soapy water. Rinse thoroughly to remove all soap residue.
• 광고로 장치의 외부를 닦습니다.amp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.

오일 관리

• Regularly filter or replace cooking oil to maintain food quality and extend oil life.
• 사용된 오일은 해당 지역 규정에 따라 폐기하세요.

구성품 검사

• Periodically inspect the lid gasket and pressure release valve for wear or damage. Replace if necessary to ensure proper pressure sealing.
• 전원 코드에 손상된 흔적이 있는지 확인하십시오.

Figure 4: The internal frying basket, designed for holding food during the pressure frying process. This component is removable for cleaning.

문제 해결

명세서

보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact the manufacturer directly. Contact details are typically found on the product packaging or the manufacturer's official web대지.