BARSKA Large 1.94 Cubic Feet Steel Biometric Fingerprint Keypad Safe

1. 서론

This manual provides essential instructions for the proper setup, operation, and maintenance of your BARSKA Large 1.94 Cubic Feet Steel Biometric Fingerprint Keypad Safe. This safe is designed to secure and protect your valuables using advanced biometric fingerprint scanning technology and a numeric digital keypad. It offers storage for up to 30 unique fingerprints and 1 PIN code, along with a programmable sound option for discreet access. In the event of battery depletion, two back-up keys are provided for emergency access.

2. 안전 정보

• Always keep the backup keys in a secure location away from the safe. Do not store them inside the safe.
• 무단 제거를 방지하기 위해 금고가 단단히 고정되어 있는지 확인하십시오.
• 금고를 극한의 온도나 습도에 노출시키지 마십시오.
• 지문 센서의 최적 성능을 위해 깨끗하고 건조한 상태를 유지하십시오.
• 배터리 부족 표시등이 켜지면 잠금 현상을 방지하기 위해 즉시 배터리를 교체하십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• BARSKA Biometric Fingerprint Keypad Safe
• 백업 키 2개
• Mounting Hardware (Bolts)
• 사용 설명서(본 문서)

4. 제품 오버view

The BARSKA Biometric Fingerprint Keypad Safe features a robust steel construction and a dual-access locking system. Below are key visual components of the safe.

그림 1: 앞쪽 view of the BARSKA Large Biometric Fingerprint Keypad Safe, showcasing its black finish and integrated lock mechanism.

그림 2: 상세한 view of the biometric fingerprint scanner and numeric keypad, with a backup key inserted into the manual override lock.

그림 3: A finger being placed on the illuminated biometric scanner for access, demonstrating the active state of the fingerprint recognition system.

그림 4: The safe with its external dimensions indicated: 16 inches width, 14.5 inches depth, and 17 inches height.

5. 설정

5.1 배터리 설치

The safe requires 4 AA batteries (not included) to power the electronic lock. To install:

1. Open the safe door using one of the backup keys (refer to Section 6.1).
2. 금고 문 안쪽에서 배터리 보관함을 찾으세요.
3. 올바른 극성(+/-)을 확인하여 새 AA 배터리 4개를 삽입합니다.
4. 배터리 덮개를 닫습니다.
5. Test the keypad or fingerprint scanner to ensure power is supplied.

5.2 금고 설치

This safe is designed for freestanding or tabletop placement and can be secured using the included mounting hardware.

1. 금고를 설치할 적절한 장소를 선택하고, 금고가 수평이고 안정적인지 확인하십시오.
2. If mounting to a wall or floor, mark the desired drilling points through the pre-drilled holes inside the safe.
3. 적절한 드릴 비트를 사용하여 벽이나 바닥에 파일럿 구멍을 뚫으세요.
4. Align the safe with the drilled holes and secure it using the provided bolts. Tighten all bolts firmly.

6. 사용 설명서

6.1 Initial Access (Using Backup Key)

To open the safe for the first time or in case of battery failure:

1. Locate the keyhole cover on the lock mechanism.
2. 덮개를 제거하면 열쇠 구멍이 나타납니다.
3. Insert one of the backup keys and turn it clockwise.
4. While holding the key turned, rotate the handle (if applicable) or pull the door open.

6.2 프로그래밍 지문

금고에는 최대 30개의 고유 지문을 저장할 수 있습니다.

1. With the safe door open, press the internal programming button (usually red or green, located near the battery compartment).
2. The scanner will illuminate, indicating it is ready for programming.
3. Place your finger firmly on the scanner. Lift and repeat this action several times (typically 3-5 times) until a confirmation sound or light signal is received.
4. Repeat for additional fingers or users.

6.3 Programming Keypad PIN

The safe allows for one programmable PIN code.

1. 금고 문이 열린 상태에서 내부 프로그래밍 버튼을 누르십시오.
2. Enter your desired PIN code (4-8 digits) on the keypad.
3. Press the '#' or 'ENTER' button to confirm.
4. Re-enter the PIN code and press '#' or 'ENTER' again for verification. A confirmation sound or light signal will indicate successful programming.

6.4 금고 열기

You can open the safe using a registered fingerprint, the programmed PIN, or a backup key.

• 지문 사용: Place a registered finger firmly on the biometric scanner. If recognized, the safe will unlock.
• 키패드 사용: Enter your programmed PIN code on the keypad, then press '#' or 'ENTER'. If correct, the safe will unlock.
• Using Backup Key: 섹션 6.1을 참조하십시오.

6.5 Programmable Sound Option

The safe offers a programmable sound option to eliminate default alerts when opening. Refer to your specific model's detailed instructions for enabling or disabling this feature, typically involving a combination of keypad presses or a dedicated button.

7. 유지관리

7.1 배터리 교체

When the low battery indicator (usually a light or audible alert) appears, replace all 4 AA batteries promptly to ensure continuous operation and prevent lockout. Refer to Section 5.1 for battery installation steps.

7.2 청소

Use a soft, dry cloth to clean the exterior of the safe. For the fingerprint sensor and keypad, use a slightly damp cloth and wipe gently. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.

8. 문제 해결

• Safe does not open with fingerprint or PIN:
  • 배터리 잔량을 확인하고 필요한 경우 교체하십시오.
  • Ensure your finger is clean and dry when using the biometric scanner.
  • Try re-registering your fingerprint (Section 6.2) or re-programming your PIN (Section 6.3).
  • Ensure the correct PIN is entered.
• Safe door does not close or lock properly:
  • Ensure there are no obstructions preventing the door from closing fully.
  • Check that the locking bolts are not extended when attempting to close the door. If they are, try re-entering your code or fingerprint to retract them.
• Fingerprint scanner not activating:
  • Verify batteries are installed correctly and have sufficient charge.
  • Ensure the scanner surface is clean.
• Safe opens unexpectedly after pressing '0':
  • This indicates a potential issue with the locking mechanism or programming. Ensure the safe is properly locked after closing. If this persists, contact customer support.
• All electronic functions fail:
  • 배터리를 즉시 교체하십시오.
  • Use the backup key for access.

9. 사양

10. 보증 및 지원

For warranty information or technical assistance, please contact Barska customer support. Details can typically be found on the manufacturer's official web사이트나 소매업체를 통해 구매하세요.