Anest Iwata Supernova LS400-1305 Spray Gun User Manual

1. 서론

Thank you for choosing the Anest Iwata Supernova LS400-1305 Spray Gun. This professional-grade spray gun is designed for high-quality paint application, offering precision and efficiency. This manual provides essential information for the safe and effective setup, operation, maintenance, and troubleshooting of your new equipment. Please read this manual thoroughly before use and retain it for future reference.

2. 안전 정보

Operating a spray gun involves potential hazards. Adhering to safety guidelines is crucial to prevent injury and damage. Always prioritize safety.

• 통풍: Always use this equipment in a well-ventilated area to prevent the accumulation of hazardous fumes.
• 개인 보호 장비(PPE): Wear appropriate PPE, including safety glasses or goggles, respirators, gloves, and protective clothing, to avoid contact with paint and solvents.
• 피부 및 눈 접촉: Avoid direct contact of paint and solvents with skin and eyes. In case of contact, flush immediately with plenty of water and seek medical attention if irritation persists.
• 인화성 물질: Keep the spray gun and work area away from open flames, sparks, and other ignition sources, especially when using flammable paints or solvents.
• 처분: Do not dispose of paint, solvents, or cleaning materials in regular trash. Always follow local regulations for the proper disposal of hazardous materials.
• 공기압: Never exceed the maximum recommended air pressure for the spray gun.
• 어린이와 애완동물: Keep the equipment out of reach of children and pets.

3. 제품 오버view

The Anest Iwata Supernova LS400-1305 is a high-performance gravity-feed spray gun designed for automotive and industrial finishes. It features advanced atomization technology for a smooth, even finish.

그림 1: Anest Iwata Supernova LS400-1305 Spray Gun with PCG10D-2 1000mL Aluminum Cup. This image displays the complete spray gun assembly, including the gun body, air cap, fluid nozzle, paint cup, and various adjustment knobs.

주요 구성 요소:

• Spray Gun Body: The main housing of the gun.
• 에어캡: Directs the air to atomize the paint.
• 유체 노즐: Controls the flow of paint.
• 유체 주입 바늘: Regulates paint flow through the nozzle.
• 공기 밸브: Controls the air supply to the gun.
• 선풍기 바람 방향 조절 손잡이: Adjusts the shape and size of the spray pattern.
• 유체 조절 손잡이: Controls the amount of paint released.
• 공기 조절 손잡이: Regulates the air pressure at the gun.
• PCG10D-2 1000mL Aluminum Cup: Gravity-feed cup for paint supply.

4. 설정

4.1 풀기 및 검사

1. 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. Inspect the spray gun and accessories for any signs of damage during shipping. If any damage is found, contact your supplier immediately.
3. 나열된 모든 구성 요소가 있는지 확인하세요.

4.2 조립

1. Attach the 1000mL aluminum cup to the top of the spray gun body by screwing it securely into place.
2. Ensure the air cap and fluid nozzle are securely tightened onto the gun body. Do not overtighten.

4.3 공기 공급 장치 연결

1. Connect a clean, dry air hose to the air inlet at the bottom of the spray gun handle. A quick-disconnect fitting is recommended.
2. Ensure your air compressor is equipped with an air filter/regulator to provide clean, regulated air pressure.
3. Set the air pressure at the regulator to the recommended starting pressure (refer to paint manufacturer's specifications or gun specifications).

4.4 초기 청소

Before first use, it is recommended to flush the gun with a compatible solvent to remove any manufacturing residues.

1. Pour a small amount of appropriate cleaning solvent into the paint cup.
2. Spray the solvent through the gun into a waste container until it runs clear.
3. Wipe the exterior of the gun clean.

5. 사용 설명서

5.1 Preparing Paint

1. Mix paint according to the manufacturer's instructions, paying close attention to thinning ratios and pot life.
2. Strain the paint through a fine mesh filter into the 1000mL aluminum cup to prevent clogs.
3. Securely attach the cup lid.

5.2 컨트롤 조정

The LS400-1305 features three main adjustment controls:

• Fan Pattern Adjustment Knob (Top): Turn clockwise for a rounder pattern, counter-clockwise for a wider, flatter pattern.
• Fluid Adjustment Knob (Rear): Turn clockwise to decrease fluid flow, counter-clockwise to increase fluid flow.
• Air Adjustment Knob (Bottom of handle): Regulates the air pressure at the gun. Adjust for optimal atomization.

Start with recommended settings (often found in paint technical data sheets) and fine-tune on a test panel.

5.3 분무 기술

1. 총을 표면과 수직으로 잡고 일정한 거리(일반적으로 6~8인치)를 유지합니다.
2. Trigger the gun fully before starting your pass and release after completing the pass.
3. Overlap each pass by 50% to ensure even coverage.
4. 손목만 움직이지 말고 팔도 움직여 총과 표면 사이의 거리를 일정하게 유지하세요.

5.4 사용 후 청소

Thorough cleaning after each use is essential for optimal performance and longevity.

1. 컵에 남아있는 물감을 모두 비우세요.
2. 컵에 적절한 양의 세척 용제를 붓습니다.
3. Spray the solvent through the gun into a waste container until the solvent runs clear.
4. Remove the air cap and fluid nozzle. Clean them thoroughly with a brush and solvent.
5. Clean the fluid needle and the inside of the gun body.
6. Wipe all external surfaces clean.
7. 총을 다시 조립하십시오.

6. 유지관리

6.1 정기 청소

Beyond daily cleaning, periodically disassemble the gun for a more thorough cleaning. Pay attention to the fluid needle packing and air valve assembly. Replace worn seals and O-rings as needed.

6.2 윤활

Apply a small amount of non-silicone lubricant to the fluid needle packing and air valve stem periodically to ensure smooth operation and prevent wear. Do not lubricate the air cap or fluid nozzle.

6.3 보관

깨끗하고 건조한 스프레이 건은 보호 케이스에 보관하거나 깨끗하고 건조한 곳에 걸어 먼지가 쌓이거나 손상되는 것을 방지하십시오.

7. 문제 해결

8. 사양

• 상표: Iwata
• 모델 번호: LS400-1305
• 제조업체 부품 번호: 이와5938
• Tank Volume (Cup): 1000 Cubic Centimeters (1000mL)
• 품목 무게: Approximately 0.01 Ounces (Note: This weight may refer to packaging or a component, actual gun weight will be higher.)
• 스타일: 중력 피드 스프레이 건
• 전원: Pneumatic (Air-powered). (Note: While 'Corded Electric' is listed in some specifications, this model is a pneumatic spray gun requiring an air compressor.)

9. 보증 및 지원

For specific warranty information regarding your Anest Iwata Supernova LS400-1305 Spray Gun, please refer to the warranty card included with your product or visit the official Iwata web사이트. 보증 약관은 지역 및 소매업체에 따라 다를 수 있습니다.

For technical support, spare parts, or service inquiries, please contact your authorized Anest Iwata dealer or the Anest Iwata customer service department. Contact information can typically be found on the manufacturer's web사이트 또는 제품 포장.