1. 제품 오버view
Thank you for choosing the Vipack Solid Wood Rocking Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your rocking chair. Please read it thoroughly before use and retain it for future reference.
- 제품 이름: Solid Wood Rocking Chair
- 상표: 비팩
- 모델: RKST1015
- 색상: 회색
- 재료: 견고한 나무
- 치수(D x W x H): 69cm x 85cm x 124cm
- 품목 무게: 13kg
- 최대 중량 용량: 100kg
Image 1: The Vipack Solid Wood Rocking Chair in grey, illustrating its overall dimensions: 69 cm depth, 85 cm width, and 124 cm height. The chair features a high backrest with vertical slats and rounded armrests, all constructed from solid wood.
2. 안전 정보
To ensure safe use of your Vipack Rocking Chair, please adhere to the following safety guidelines:
- 중량 제한: Do not exceed the recommended maximum weight capacity of 100 kg (220 lbs). Exceeding this limit can compromise the chair's stability and lead to tipping or damage.
- 안정: Ensure the chair is placed on a flat, stable, and level surface before use. Uneven surfaces can cause the chair to rock unpredictably or tip over.
- 전복 위험: Avoid excessive leaning or rocking, especially to the sides, as this can cause the chair to tip. Always maintain a balanced posture while seated.
- 어린이들: Keep children away from the rocking mechanism to prevent pinching or injury. This chair is designed for adult use.
- 집회: Ensure all components are correctly assembled and tightened according to the instructions before use. Periodically check all fasteners to ensure they remain secure.
- 유지: Regularly inspect the chair for any signs of wear, damage, or loose parts. Discontinue use if any damage is found and contact support for assistance.
3. 패키지 내용
Upon opening the package, please verify that all the following components are present and undamaged:
- Rocking Chair Components (seat, backrest, armrests, rockers, legs)
- 조립용 하드웨어(나사, 볼트, 와셔, 너트)
- 조립 설명서
- Required Assembly Tool (e.g., Allen key, if included)
If any parts are missing or damaged, do not proceed with assembly. Contact Vipack customer support immediately for replacement parts.
4. 설치 및 조립
Assembly of the Vipack Rocking Chair is required. Please follow the included assembly instructions carefully. It is recommended to have two people for assembly to ensure stability and ease of handling.
- 풀다: 모든 구성품을 포장에서 조심스럽게 꺼낸 후 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
- 부품 식별: Refer to the parts list in the separate assembly instructions to identify each component and piece of hardware.
- 프레임 조립: Begin by attaching the legs to the seat frame, followed by the backrest and armrests. Ensure all connections are aligned correctly.
- Attach Rockers: Securely attach the curved rocker bases to the bottom of the chair legs.
- 패스너 조이기: Once all components are in place, gradually tighten all screws, bolts, and nuts. Do not overtighten, as this can damage the wood.
- 최종 확인: Before first use, gently test the chair for stability and ensure all parts are securely fastened.
Note: Detailed, step-by-step assembly instructions with diagrams are provided in a separate document within the product packaging.
5. 사용 설명서
The Vipack Solid Wood Rocking Chair is designed for comfortable and gentle rocking motion. To operate:
- 좌석: Sit centrally and evenly on the chair. Avoid sitting on the edge or armrests.
- 흔들림 동작: Gently push off with your feet to initiate a smooth rocking motion. Control the speed and range of motion with your body weight and foot pressure.
- 멎는: To stop rocking, place your feet flat on the floor and allow the chair to come to a natural rest.
Ensure the area around the chair is clear of obstructions to prevent accidents during rocking.
6. 유지관리
Proper care will extend the life and appearance of your Vipack Rocking Chair:
- 청소: Clean the chair with a dry, soft cloth. For spills or stains, wipe them quickly with a slightly damp cloth and then dry thoroughly. Avoid using harsh chemicals or abrasive cleaners, which can damage the wood finish.
- 가루 살포: Regularly dust the chair to prevent buildup.
- 점검: Periodically check all screws, bolts, and joints to ensure they are tight. Retighten if necessary, but do not overtighten.
- 환경: Keep the chair in a stable indoor environment. Avoid prolonged exposure to direct sunlight, extreme temperatures, or high humidity, which can cause the wood to warp, crack, or fade.
- 움직이는: When moving the chair, lift it rather than dragging it to prevent damage to the legs and rockers.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 의자가 불안정하거나 흔들립니다. | 나사가 헐거워져 있거나 바닥면이 고르지 않습니다. | Check and tighten all assembly screws and bolts. Ensure the chair is on a flat, level surface. |
| Squeaking noise during rocking. | Friction between wood components; loose joints. | Inspect joints for tightness. A small amount of silicone spray or wax on contact points (not visible surfaces) might help, but consult manufacturer if persistent. |
| 조립이 어려움. | 부품 방향이 잘못되었거나, 하드웨어가 누락되었습니다. | Refer to the detailed assembly instructions. Ensure parts are oriented correctly. Contact support if parts are missing or damaged. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Vipack customer support.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 비팩 |
| 모델명 | RKST1015 |
| 색상 | 회색 |
| 재료 | 견고한 나무 |
| 제품 크기(D x W x H) | 69D x 85B x 124H 센티미터 |
| 품목 무게 | 13킬로그램 |
| 최대 중량 권장 사항 | 100킬로그램 |
| 백 스타일 | 쿠션 백 |
| 프레임 소재 유형 | 견고한 나무 |
| 특별 기능 | 안정적인 |
| 제품 관리 지침 | Clean with a dry cloth and wipe stains quickly |
| Recommended Use for Product | Dining (Note: This is likely a misclassification in source data, typically used for relaxation/nursery) |
| 객실 유형 | Office (Note: This is likely a misclassification in source data, typically used for living room/nursery) |
| Age Group Description | 성인 |
| 조립이 필요합니다 | 예 |
| 실내/실외 사용 | 실내 |
| 마무리 유형 | 치료되지 않음 |
| 가구 마감 | Natural wood grain |
9. 보증 및 지원
Vipack stands behind the quality of its products. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Vipack web대지.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Vipack customer support through their official channels. Please have your model number (RKST1015) and purchase details ready when contacting support.
For general inquiries, you may also contact the seller, Huisenthuis, via their Amazon seller page: Huisenthuis Seller Page.