1. 서론
Thank you for choosing the AVANTEK CW-11 Wireless Doorbell. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use and retain it for future reference.
2. 패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- 1 x 플러그인 수신기
- 1 x Transmitter (Push Button)
- 2 x 나사
- 2 x 벽 앵커
- 1 x Small Key (for battery compartment)
- 1 x 양면 접착 테이프
- 1 x 사용자 설명서
Image: Contents of the AVANTEK Doorbell Kit, showing the receiver, transmitter, screws, anchors, key, and adhesive tape.
3. 제품 오버view
수화기
- Plug-in design for easy power.
- LED indicator for visual alerts.
- 볼륨 조절 버튼.
- Melody selection buttons.
- Compact design (approx. 8 cm height, 7.3 cm width) that does not obstruct adjacent power outlets.
Image: The compact receiver plugged into a wall outlet, illustrating its small size (8 cm height, 7.3 cm width) and how it leaves adjacent sockets free.
송신기
- Push button with LED indicator.
- Powered by a CR2032 lithium battery (included), offering up to 3 years of lifespan.
- IP55 dustproof and waterproof rating, suitable for outdoor use in temperatures from -20°C to +60°C.
Image: The doorbell transmitter highlighting its IP55 dustproof and waterproof features, with illustrations of its resilience in both cold (-20°C) and hot (60°C) weather, and a 3-year maximum battery lifespan.
4. 설정
4.1 송신기 설치
The transmitter can be installed using either the provided screws and anchors or the double-sided adhesive tape.
- 접착 테이프 방식: Clean the desired mounting surface thoroughly. Peel off one side of the protective film from the double-sided adhesive tape and attach it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the wall for at least 30 seconds.
- Screw-in Method: Mark the desired mounting location. Drill two holes at the marked spots. Insert the wall anchors into the holes. Align the transmitter's mounting holes with the anchors and secure it with the screws.
4.2 수신기 설정
Simply plug the receiver into any standard indoor power outlet. The receiver's LED will flash, indicating it is powered on and ready for pairing.
4.3 송신기와 수신기 페어링
The doorbell system is pre-paired at the factory. If re-pairing is needed or if you are adding additional transmitters/receivers:
- 수신기를 연결합니다.
- Press and hold the volume button on the receiver for 3 seconds until its LED starts flashing. This indicates pairing mode.
- Within 5 seconds, press the transmitter button. The receiver's LED will flash, and it will play its current melody once, indicating successful pairing.
- 페어링에 실패하면 단계를 반복하세요.
Video: This video demonstrates how to pair the AVANTEK wireless doorbell system components, including activating the receiver and transmitter for pairing.
5. 운영
5.1 멜로디 변화
수신기는 52가지의 멜로디를 제공합니다. 멜로디를 변경하려면:
- Press the 'Next' or 'Previous' button on the side of the receiver to cycle through the available melodies.
- The receiver will play each melody as you select it.
- The memory function ensures your last selected melody is retained even after a power outage.
Image: The doorbell receiver displaying its features: 52 chimes and tunes, 5 volume levels, and an LED indicator. Examples of melodies like 'Canon' and 'Ding-Dong' are shown.
5.2 볼륨 조절
The receiver has 5 adjustable volume levels, with a maximum sound intensity of 115 dB. To adjust the volume:
- Press the 'Volume' button on the side of the receiver repeatedly to cycle through the 5 volume levels.
- The receiver will play a sound at each level to indicate the current volume.
- The memory function retains your last selected volume level.
5.3 Silent Mode (LED Notification)
For situations requiring silence, such as during sleep or meetings, the receiver can be set to silent mode, where it only provides a visual LED notification.
- Cycle through the volume levels until the mute icon is displayed or the sound is off. The LED will still flash when the doorbell is pressed.
Image: The doorbell receiver illustrating its silent LED notification mode and the range of 5 adjustable volume levels (0-115 dB), with examples of typical sound environments.
Video: This video demonstrates how to adjust the volume and activate the silent mode on the AVANTEK wireless doorbell receiver.
6. 유지관리
6.1 배터리 교체 (송신기)
The transmitter uses a CR2032 lithium battery with an average lifespan of 3 years. When the transmitter's LED no longer lights up or the range decreases significantly, it's time to replace the battery.
- Use the small key (or a small flat-head screwdriver) to open the battery compartment on the side of the transmitter.
- 오래된 CR2032 배터리를 조심스럽게 제거하세요.
- 새 CR2032 배터리를 양극(+)이 위를 향하게 하여 삽입하세요.
- 배터리 칸을 단단히 닫으세요.
6.2 청소
초인종 본체를 부드럽고 마른 천으로 닦으십시오. 표면이 손상될 수 있으므로 연마성 세제나 용제를 사용하지 마십시오.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 초인종이 울리지 않습니다. | Receiver not plugged in or powered off. Transmitter battery is dead. Units are not paired. | Ensure receiver is plugged in and powered. Replace transmitter battery. Re-pair the units (see Section 4.3). |
| 무선 범위가 짧음. | Obstructions (thick walls, metal structures). Interference from other devices. Low transmitter battery. | Relocate receiver or transmitter to minimize obstructions. Replace transmitter battery. |
| 수신기 LED는 깜빡이지만 소리가 나지 않습니다. | Receiver is in silent (mute) mode. Volume is set to minimum. | Adjust the volume level (see Section 5.2). |
| Cannot change melody. | 버튼이 제대로 눌리지 않았습니다. | Ensure you are pressing the 'Next' or 'Previous' melody buttons firmly. |
8. 사양
- 모델: CW-11 / SB-122
- 상표: Avantek
- 무선 범위: 야외에서 최대 300미터(1000피트)
- 멜로디: 52가지 선택 가능한 차임벨 소리
- 볼륨 레벨: 5 adjustable levels (0-115 dB)
- 송신기 배터리: CR2032 리튬 배터리 1개 (포함)
- 송신기 배터리 수명: 최대 3년
- 수신기 전력: 교류 100-240V (플러그인 방식)
- 작동 온도: -20°C ~ +60°C (-4°F ~ +140°F)
- 방수 등급: IP55 (송신기)
- 인증: CE, FCC, RoHS
- 치수(수신기): 약 11.4×9.5×6.9 cm
- 무게: 159그램(전체 패키지)
- 설치 방법: Self-adhesive or Screw-in
Image: Diagram illustrating the 300-meter (1000 ft) wireless range of the AVANTEK doorbell system within a multi-story home environment.
비디오: 이 비디오는 다음을 제공합니다.view of the AVANTEK Mini Doorbell Kit, demonstrating its features like instant pairing of multiple receivers, silent mode, and IP55 weather resistance.
9. 보증 및 지원
AVANTEK products come with a standard manufacturer's warranty. For specific warranty details, technical support, or any inquiries, please refer to the contact information provided on the product packaging or visit the official AVANTEK website. Please note that compatibility for products purchased before 2021 may vary; contact customer support for verification.