LATNEX ED88TPlus

LATNEX Cornet ED88TPlus 5G EMF/RF 탐지기 사용 설명서

Model: ED88TPlus | Brand: LATNEX

소개

The LATNEX Cornet ED88TPlus 5G EMF/RF Detector is a versatile instrument designed for measuring electromagnetic fields (EMF), radio frequency (RF) signals, and low-frequency magnetic and electric fields. This device provides essential data for understanding your environment's electromagnetic landscape, featuring sound signature analysis, an LCD histogram for signal power levels, and automatic data logging capabilities. It is an essential tool for identifying and monitoring various sources of electromagnetic radiation.

LATNEX Cornet ED88TPlus 5G EMF/RF Detector in its carrying case

Figure 1: LATNEX Cornet ED88TPlus 5G EMF/RF Detector with included carrying case.

설정

배터리 설치

The LATNEX Cornet ED88TPlus requires one 9V battery (included). To install the battery, locate the battery compartment on the back of the device. Slide open the cover, insert the 9V battery, ensuring correct polarity, and then close the compartment securely.

뒤쪽에 view of LATNEX Cornet ED88TPlus 5G EMF/RF Detector showing battery compartment

그림 2: 후면 view of the detector, highlighting the battery compartment.

전원 켜기/끄기

Press and hold the power button (typically the 'Mode' button or a dedicated power button) for a few seconds until the LCD screen illuminates. To power off, press and hold the same button until the screen turns off.

작동 지침

위에view 컨트롤의

The device features several buttons for mode selection, data hold, backlight control, and unit changes. Familiarize yourself with the button layout for efficient operation.

Diagram of LATNEX Cornet ED88TPlus 5G EMF/RF Detector controls and display elements

Figure 3: Diagram illustrating the device's controls and display features.

모드 선택

Use the 'Mode' button to cycle through the different measurement modes: Radio Frequency (RF), Magnetic Field (LF Gauss), and Electric Field (EF). Each mode is designed to detect specific types of electromagnetic radiation.

Radio Frequency (RF) Mode

In RF mode, the detector measures wide radio frequencies from 100 MHz to 8 GHz. This is suitable for detecting signals from Wi-Fi routers, cell phones, smart meters, and other wireless communication devices. The display will show signal power levels, often in mW/m² or dBm.

Magnetic Field (LF Gauss) Mode

This mode measures low-frequency magnetic fields, typically in the range of 50 Hz to 10 KHz or 50 Hz to 1 KHz. It is used to detect magnetic fields emitted by electrical appliances, power lines, and other sources of alternating current.

Electric Field (EF) Mode

The Electric Field mode measures low-frequency electric fields from 50 Hz to 10 KHz. This is useful for identifying electric fields from unshielded wiring, electrical outlets, and various electronic devices.

Display and Sound Features

The LCD screen features a moving graphic histogram that visually represents the signal power level, allowing for easy interpretation of fluctuating readings. The device also includes sound signature analysis, providing an audible indication of the detected field strength, which can be particularly useful for quickly locating sources.

LCD display showing data logging view window with WiFi signal and DECT signal

그림 4: 예ample of the data logging view window on the LCD display.

데이터 로깅

The ED88TPlus supports automatic data logging, allowing you to record measurement data over time. This feature is valuable for long-term monitoring and identifying patterns in electromagnetic exposure. Refer to the detailed user manual for specific instructions on setting up and retrieving logged data.

유지

  • 청소: 부드럽고 마른 천을 사용하여 기기를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
  • 저장: Store the detector in its included EVA carrying case in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.
  • 배터리 교체: 정확한 측정값을 얻으려면 디스플레이에 배터리 부족 표시등이 나타나면 9V 배터리를 교체하십시오.

문제 해결

  • 장치가 켜지지 않음: 9V 배터리가 올바르게 설치되었는지, 그리고 충전량이 충분한지 확인하십시오. 필요한 경우 배터리를 교체하십시오.
  • 부정확한 판독값: Ensure the device is held correctly and away from your body or other potential interference sources. Check battery level.
  • 소리가 나지 않습니다: Verify that the sound alarm is enabled in the device settings.

For further assistance, refer to the comprehensive user manual or contact LATNEX customer support.

명세서

특징세부 사항
상표라넥스
모델ED88TPlus
RF 주파수 범위100MHz - 8GHz
자기장 범위50 Hz - 10 KHz (Mode 1), 50 Hz - 1 KHz (Mode 2)
전기장 범위50Hz - 10kHz
전원1 x 9V 배터리(포함)
배터리 수명50시간
품목 무게5 온스
재료금속
국제 보호 등급IP56
추천 용도Magnetic Locator, RF field strength/power level measurement, Wireless LAN detection

보증 및 지원

For warranty information and technical support, please refer to the documentation included with your product or visit the official LATNEX web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.