1. 소개 및 이상view
The Atomberg Renesa 1200mm BLDC Ceiling Fan is designed for superior air delivery and energy efficiency. Featuring a Brushless DC (BLDC) motor, this 5-star rated fan significantly reduces electricity consumption while providing consistent airflow. It comes equipped with a smart IR remote for convenient control of speed, boost mode, timer, and sleep mode. Its sleek design with integrated LED indicators enhances any room's decor.
그림 1: Atomberg Renesa 1200mm BLDC Ceiling Fan (Gloss White) with its remote control. This image shows the fan's three blades and central motor housing, along with the compact remote.
2. 안전 정보
- Always ensure the main power supply is disconnected before installation, cleaning, or maintenance.
- Installation must be performed by a qualified electrician or service professional.
- 팬이 작동하는 동안 팬 날개에 손가락이나 다른 물건을 넣지 마십시오.
- Ensure the fan is securely mounted to a ceiling joist or a suitable support structure capable of holding the fan's weight.
- 리모컨을 물과 극한의 온도에 두지 마세요.
- 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.
3. 패키지 내용
설치를 시작하기 전에 패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- Motor Box (contains the fan motor assembly)
- Blade Box (contains the three fan blades)
- 원격 제어
- Canopies (upper and lower)
- 보증 카드
- Mounting Hardware (screws, bolts, etc. - typically included with the motor box)
4. 설정 및 설치
The Atomberg Renesa fan is designed for straightforward installation. For optimal safety and performance, it is highly recommended to have the fan installed by a certified professional. Doorstep installation services can be initiated through Urban Company or directly via Atomberg's customer support.
4.1 설치 전 체크리스트
- 설치 구역의 전원이 주 차단기에서 차단되었는지 확인하십시오.
- Confirm the ceiling structure can support the fan's weight (approximately 3.4 kg).
- Gather necessary tools: screwdriver set, wire strippers, electrical tape, ladder.
4.2 설치 단계(일반 가이드)
While professional installation is advised, the general steps involve:
- 브라켓 장착: Securely attach the mounting bracket to the ceiling junction box or a reinforced ceiling support.
- 배선: 선풍기의 전선을 지역 전기 규정에 따라 가정용 배선에 연결하십시오. 모든 연결부가 단단히 고정되고 절연되었는지 확인하십시오.
- 팬 조립: Attach the downrod (if applicable) to the motor housing, then slide the canopies into place.
- 팬 걸기: 팬 조립체를 조심스럽게 들어 올려 장착 브래킷에 걸어주세요.
- 칼날 부착: Securely fasten each of the three fan blades to the motor housing using the provided screws.
- 최종 점검: Ensure all connections are tight and the fan is stable before restoring power.
그림 2: 폭발했다 view of the BLDC motor, highlighting its advanced components that contribute to energy efficiency and consistent performance. This illustrates the core technology of the fan.
5. 사용 설명서
The Atomberg Renesa fan is operated using the included Smart IR Remote. Ensure the remote has working batteries and is pointed towards the fan's receiver for optimal functionality.
5.1 리모콘 기능
그림 3: The Smart IR Remote for the Atomberg Renesa fan, showing buttons for power, speed control (1-5), Boost mode, Timer mode, LED light control, and Sleep mode.
- 전원 버튼 (붉은 원): 팬을 켜거나 끕니다.
- 속도 제어(1-5): Adjusts the fan speed from 1 (lowest) to 5 (highest). The fan provides 6 power levels in total.
- Boost Mode ('B' 버튼): Activates the fan at its maximum speed (equivalent to speed 6 or 35W) for rapid cooling.
- Timer Mode (시계 아이콘): Sets a timer for the fan to automatically turn off after a specified duration. Refer to the remote's specific instructions for setting the timer.
- 절전 모드(달 아이콘): Gradually decreases the fan speed by one level every two hours, providing comfortable sleep while saving energy.
- LED Light Control (전구 아이콘): Toggles the integrated LED indicator lights on or off. These lights can serve as a night lamp.
5.2 Power Consumption at Each Speed
The BLDC motor ensures low power consumption across all speed settings:
그림 4: Power consumption table illustrating the low wattage at different fan speeds, from Speed 1 (3W) to Boost Speed (35W).
| 속도 | 왓tag전자 (W) |
|---|---|
| 1 | 3 |
| 2 | 7 |
| 3 | 12 |
| 4 | 18 |
| 5 | 28 |
| 부스트 속도 | 35 |
6. 유지관리
Regular maintenance ensures the longevity and efficient operation of your Atomberg Renesa fan.
- 청소: Dust accumulates on fan blades and motor housing. Regularly clean the fan with a soft, damp cloth. Ensure the fan is completely turned off and power is disconnected before cleaning. Do not use abrasive cleaners or solvents.
- 블레이드 검사: Periodically check the fan blades for any signs of damage or bending. Damaged blades can cause imbalance and noise.
- 나사의 조임 상태: Over time, screws can loosen. Occasionally check and tighten all screws on the fan blades and mounting assembly.
- 윤활이 필요 없습니다: BLDC 모터는 유지보수가 필요 없는 작동을 위해 설계되었으며 윤활이 필요하지 않습니다.
7. 문제 해결
If you encounter issues with your Atomberg Renesa fan, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 켜지지 않습니다. | No power supply; Remote battery low/dead; Remote not paired (though IR remotes don't typically pair, ensure line of sight); Loose wiring. | Check main power supply and circuit breaker. Replace remote batteries. Ensure clear line of sight to the fan's receiver. Check wiring connections (consult a professional if unsure). |
| Fan operates but air delivery is low. | Fan speed set too low; Room size too large for fan sweep; Obstructions. | Increase fan speed using the remote. Refer to sweep size guide (Figure 5) to ensure appropriate fan size for your room. Remove any obstructions. |
| 팬에서 이상한 소리가 납니다. | Loose screws on blades or mounting; Bent blades; Internal motor issue. | Tighten all screws on blades and mounting. Inspect blades for damage and replace if necessary. If noise persists, contact customer support. |
| 리모컨이 응답하지 않습니다. | Low/dead batteries; Obstruction between remote and fan; Remote out of range. | Replace batteries. Ensure direct line of sight to the fan. Operate within 20 ft range. |
그림 5: Sweep size guide. This diagram helps determine the appropriate fan size based on room area, ensuring effective air circulation.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 아톰버그 |
| 모델명 | 르네사 |
| 색상 | 광택 화이트 |
| 선풍기 디자인 | 천장 선풍기 |
| 전원 | 코드식 전기 |
| 제품 치수 | 59D x 25W x 23H 센티미터 |
| 객실 유형 | 침실, 식당, 거실, 사무실 |
| 특징 | 원격 제어 |
| 추천 용도 | 냉각 |
| 왓tage | 35W (최대) |
| 마무리 유형 | 광택 |
| 블레이드 수 | 3 |
| 기류 용량 | 235 Cubic Metres per Minute (CMM) |
| 블레이드 길이 | 48인치(1200mm) |
| 속도 | 360 RPM |
| 권tage | 220 볼트 |
| 스위치 유형 | 원격 |
| 품목 무게 | 3.4 킬로그램 |
| 실내/실외 사용 | 실내 |
| 제어 방법 | 원격 |
| 라이트 타입 | 주도의 |
| 블레이드 소재 | 알류미늄 |
| 능률 | 고효율 (BEE 5성급 등급) |
| 전력 수준의 수 | 6 |
9. 보증 및 지원
The Atomberg Renesa ceiling fan comes with a standard two-year warranty. An additional one-year warranty can be availed by registering your purchase on the official Atomberg web사이트입니다. 보증 청구를 위해 구매 영수증을 보관해 주십시오.
9.1 보증 등록
To avail warranty service, it is essential to register your product's barcode. You can register the barcode by visiting the official Atomberg website or by contacting their customer care.
9.2 고객 지원
For any queries, technical assistance, or warranty claims, please contact Atomberg Customer Care:
- 이메일: support@atomberg.com
- 전화/WhatsApp: 08448449442
For installation through Urban Company, you can book a visit via their app, which also allows for rescheduling and service tracking.
